Question about 2004 Hyundai Elantra

1 Answer

2004 Hyundai Elantra.......Cruise control will not engage

When I push lever, set light comes on for a split second and goes off.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

Make sure the cruise control cable to the throttle isn't too loose, if it is ok, check your brake switch. if it is sending the signal the brake is on it will not allow cruise to work and will do same thing as described about the set light.

Posted on May 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix cruise control?


It seems this car has a problem with its cruise control if any of the brake lights are out or even if a bulb is flickering the cruise control will not engage. I would start my diagnosis there and also the cruise control fuse of course. hope this helps

Aug 04, 2014 | 2002 Hyundai Elantra GT

2 Answers

2004 ford taurus cruise control not working even though the light on the dash comes on when the switch is engaged


The cruise control cable has probably fallen off the throttle lever under the hood. The retainer vibrates loose over time. Either replace the cable or find a way to keep the cable attached to the throttle lever.

Nov 15, 2010 | 2004 Ford Taurus

1 Answer

Cruise control will not engage. Just stopped


check your fueses first, is the check engine light on, if it is it might give u a code?

Jun 07, 2010 | 2004 Hyundai Santa Fe

1 Answer

2004 ford taurus cruise control not working even though the light on the dash comes on when the switch is engaged


There are 2 connections to the throttle lever on the throttle body under the hood. One is for the gas pedal and the other is for the cruise control. The connection for the cruise control is the lower connection. The cable has a very weak retainer system. The retainer clips wear until the cable breaks away from the throttle. To get at this area, you must remove the plastic shield that is held on with 2 push pins. Just pry the push pins up and out of their holes and the cover comes loose. You must either replace the cruise control cable (~$35.00) or reattach the cable end and use a wire tie to keep it from coming off again.

Jan 18, 2010 | 2004 Ford Taurus

1 Answer

01 Hyundai Elantra - Cruise Control Doesn't Work w/ Headlights On


I had same problem (cruise control/dashboard lights) for the past month with my 2000 Elantra. Replace the tail lights bulbs - my problem was caused by a problem with the double filament within the bulb. Essententially, there was a short when I turned on the lights or hit the brakes.

I did this last night and everything is working properly now.

Sep 10, 2009 | 2001 Hyundai Elantra

3 Answers

I have a 2006 Hyundai Santa Fe that we just purchased. The cruise control light comes on but when we try to set the speed it won't engage.


Easiest way to check the brake switch is to have one person step on the brake pedal, and another get behind the truck to see if the brake lights come on.  If the brake switch is good, you may need to have the truck checked out at the dealer.  Yes, we love Hyundai.  We've had 2 Elantra's and my wife has a Tucson.  

Jul 24, 2009 | 2006 Hyundai Santa Fe

3 Answers

"Cruise" on a 5-speed '00 Hyundai Elantra


I have this same car. The place you set speed control is on the windshield wiper switch on the right side of the steering column. The button with the indicator light has to be pushed in order to use the cruise control but just because the indicator light is on, it does not mean the cruise is on. Hope this helps a little. If you need more info and someone else doesn't answer more eloquently.. I'll check back and try to give you more info. :-)

Apr 09, 2009 | 2000 Hyundai Elantra

1 Answer

Cruise control does not "kick in"


wow! tough one...I'll look into this & get back to you.

Mar 17, 2009 | Hyundai Motor 2004 Sonata

1 Answer

Cruise control and autostart


it sound to me like the transponder loop around the ignition switchor "key in the box" needs to be repositioned or the key sense wire circuit

Oct 23, 2008 | Hyundai Motor 2002 Elantra

Not finding what you are looking for?
2004 Hyundai Elantra Logo

882 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...