Question about Ford Cars & Trucks

Open Question

My 2013 ford escape keyless start battery is dead and I can't get it to shift into neutral

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
pkthoege
  • 93 Answers

SOURCE: 2002 Ford Escape will not shift into drive

This is the shift lock...you will need battery to release it electrically but there is an over ride by the shifter..either a button to push or a place to put your ignition key. This will release the shifter

Posted on Dec 02, 2008

Ad
bryant329
  • 125 Answers

SOURCE: Battery Dead - How can I get the vehicle into neutral

i hate to say it, but you are gonna have to open the hood in the confined area and try to work with the area you have or call in whatever autoclub you use / the dealer and make it their problem.

actually you can buy a jump box that plugs into your cig. lighter and jump it that way. my jump box has the set up to do it that way. but check your owners manual to see if the car will accept that without damage.

Posted on Sep 22, 2008

  • 23 Answers

SOURCE: 2001 ford escape won't start

immobilizer has kicked in

Posted on Feb 24, 2009

  • 323 Answers

SOURCE: Gear Shift not shifting properly

Depending on whether it is a column shift or floor, you have to get the linkage loose enough to get the car in neutral, move the selector back to the proper setting, and tighten everything up.

If the car is not setting on a hill or incline, you should be able to move the shift levers by hand when you've loosened the linkage and move it until it is in neutral. Put on jack stands and chock the wheels that are on the ground.

Posted on May 25, 2009

  • 93 Answers

SOURCE: Keyless remote wont work

try to reprogram the remotes using these instructions..........
i assume for 02 explorer not th 05 frestyle listed (although similar procedure)
Remote Transmitter Programming NOTE: All remote transmitters are programmable and must be set at the same time.

  1. Make sure that the anti-theft system is not armed or triggered and key code programming is not active.
  1. Open the door, then press the driver door lock control switch UNLOCK button.
  1. Turn the key from OFF to ON 8 times within 10 seconds, with the eighth turn ending in ON. If the program mode is sucessfully entered the doors will lock and unlock to confirm.
  1. Press any button on a remote transmitter, and the doors will lock and then unlock all doors to confirm that the remote transmitter is programmed. All remote transmitters must be programmed within 20 seconds of each other. Up to four remote transmitters can be programmed to the vehicles security module each time programming mode is entered.
  1. If the door locks do not respond for any remote transmitter, wait several seconds and press the button again. If the door locks still fail to respond, refer to Locks, Latches and Entry Systems — Late Build or Locks, Latches and Entry Systems — Early Build in this section.
  1. NOTE: Exiting is acknowledged by locking and unlocking the doors if at least one remote transmitter has been programmed.
    Exiting the programming mode is accomplished if one of the following has occurred:
    • The key transitions to OFF.
    • 20 seconds have passed since entering programming mode or since the last remote transmitter was programmed.
    • Four remote transmitters have been programmed.

Posted on Jun 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't it start?


Yes of course the battery run down !

Jun 07, 2015 | 2013 Ford Escape

1 Answer

How to get car out of park


If u r sayin that battery is still dead jump battery then turn key in run position, press brake pedal then shift into park. I had a sic that had battery activated solenoid so no battery no shift.

Aug 18, 2014 | 2007 Ford Escape

1 Answer

2003 ford escape failed to start; jump start was successful, but before that could happen, I noticed keyless entry not working, radio/clock completely dead, dome lights not working even with car running.


all those radio .ketless entry all inside are run by a body control module that is locator under the dash in the center behind the radio. do not confuse it with the ecu, the ecu is under the hood

Aug 27, 2013 | 2003 Ford Escape

1 Answer

Cannot move Column Shift Lever.


Shift interlock malfunction.....see a Tech

Oct 22, 2009 | 2001 Ford Escape

1 Answer

Gear Shift not shifting properly


Depending on whether it is a column shift or floor, you have to get the linkage loose enough to get the car in neutral, move the selector back to the proper setting, and tighten everything up.

If the car is not setting on a hill or incline, you should be able to move the shift levers by hand when you've loosened the linkage and move it until it is in neutral. Put on jack stands and chock the wheels that are on the ground.

May 25, 2009 | 2001 Ford Escape

1 Answer

2001 ford escape won't start


immobilizer has kicked in

Feb 22, 2009 | 2001 Ford Escape

1 Answer

2002


If the battery is dead, the shift interlock solenoid will not disengage the gear shift mechanism. You have to have sufficient current through the brake switch to disengage the interlock. Charging or replacing the battery should do it. Hope this helps

Dec 02, 2008 | 2002 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...