Question about 1999 Oldsmobile Intrigue

1 Answer

A/c compressor what to do to install the a/c compressor

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 91 Answers

Assuming it's empty, remove belt, cooling fans, radiator, alternator, hose, then these:


a/c compressor - d98a302.jpg

Posted on Apr 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 jeep liberty air conditioning oil capacity


If the compressor is dry of oil (new compressors will either be shipped with or without oil) and you need to add oil you can never go wrong by adding three ounces. Once the compressor is installed turn it by hand several times. Then install the belt and add freon.

Aug 07, 2012 | 2003 Jeep Liberty

1 Answer

Removing a/c compressor


loosen the belt of the compressor, remove the fittings of the compressor. be careful handling refrigerant.
remove bolts holding the compressor and remove it.

install the ac bypass pulley in replacement of the compressor.

tnx 4 using fixya,
drcool

Sep 14, 2008 | 1996 Ford Taurus

1 Answer

Replacement compressor locked up almost immediately, what could be the cause and how do I get it fixed? Perplexed and upset.


There is no reason that manual switches should lock up a new compressor that was installed properly. If the new mechanic installed the new compressor, he should fix it. Can't tell you what's wrong without knowing how the compressor was installed and the system filled for service. Was the proper amount of oil added to the refrigerant?

Jul 28, 2017 | 1993 Pontiac Bonneville

2 Answers

NEW AC COMPRESSOR MAKING NOISE


Did you add the correct amount of oil to the compressor? Is it overcharged? Did you evacuate all the air with a vacuum pump before charging? Was the fixed orifice replaced? If you are sure you did the install right and the oil and charge are correct you have another defective compressor

Jan 25, 2012 | 2005 Chrysler Town & Country

1 Answer

Im trying to replace the ac clutch on an 04 mustang. i have the clip off but the clutch won't slide off. help please


Clutch and Clutch Field Coil adobe.gif Printable View (235 KB)
Special Tool(s) st1260a.jpg 2-Jaw Puller
205-D026 (D80L-1002-L) or equivalent st1232a.jpg Installer, A/C Compressor Coil
412-065 (T89P-19623-EH) st1235a.jpg Holding Fixture, Compressor Clutch (3.8L vehicles)
412-098 (T94P-19703-AH) st2584a.jpg Holding Fixture, Compressor Clutch (4.6L vehicles)
412-103 (T95L-19703-AH) st1220a.jpg Remover, Differential Bearing
205-116 (T77F-4220-B1) st1234a.jpg Installer, A/C Compressor Field Coil
412-078 (T91L-19623-CH) st1233a.jpg Remover, A/C Compressor Field Coil
412-067 (T89P-19623-FH) Removal
  1. Remove the A/C compressor (19703). For additional information, refer to Air Conditioning (A/C) Compressor - 3.8L or Air Conditioning (A/C) Compressor - 4.6L in this section.
  1. Remove the bolt.
    1. Hold the A/C disc and hub assembly (19D786) with the special tool.
    1. Remove the bolt.
    a0030171.jpg
  1. Remove the A/C disc and hub assembly and the A/C clutch hub spacer (19D648).
    1. Thread an 8 x 1.25 mm bolt into the A/C clutch to force it from the compressor shaft.
    1. Lift the A/C disc and hub assembly and the A/C clutch hub spacer from the compressor shaft.
    al0322a.jpg
  1. Remove the pulley snap ring.
    l10153a.jpg
  1. Remove the A/C clutch pulley (2E884).
    l10154a.jpg
  1. ani_caut.gif CAUTION: Do not use air tools. The A/C clutch field coil (19D798) can be easily damaged.
    Remove the A/C clutch field coil.
    1. Note the location of the A/C clutch field coil electrical connector.
    1. Install the special tool on the nose opening of the A/C compressor.
    1. Install the special tool.
    1. Remove the A/C clutch field coil.
    am2024a.jpg
Installation
  1. NOTE: If installing a new A/C compressor, the A/C clutch components should be reused unless obvious signs of damage are found. If excessive grooving is found, a new A/C clutch disc and hub and A/C compressor pulley must be installed together. Otherwise, each component can be installed individually where needed.
    Visually inspect the A/C clutch disc and hub, A/C compressor pulley and A/C clutch field coil for damage.
    • Inspect for physical damage, including cracked or melted components or discoloration due to excessive heat.
    • Inspect for excessive wear, including grooving in the A/C clutch disc and hub or A/C compressor pulley that is more than fingernail depth.
    • Inspect for roughness in the A/C compressor pulley bearing.
  1. Clean the A/C disc and field coil and pulley mounting surfaces.
  1. ani_caut.gif CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
    Install the A/C clutch field coil.
    1. Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector correctly positioned.
    1. Using the special tools, install the A/C field coil.
    gl2051a.jpg
  1. NOTE: The A/C clutch pulley is a tight fit on the A/C compressor head. It must be correctly aligned during installation.
    Install the A/C clutch pulley.
    l10157a.jpg
  1. Install the pulley snap ring with the bevel side out.
    l10158a.jpg
  1. Place one nominal thickness A/C clutch hub spacer inside the clutch hub spline opening.
    gl2100a.jpg
  1. Install the A/C clutch.
    l10159a.jpg
  1. Using the special tool, install the A/C disc and hub assembly retaining bolt.
    a0030060.jpg
  1. Measure and adjust the clutch air gap by removing or adding A/C clutch hub spacers.
    a0031504.jpg
  1. Install the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor - 3.8L or Air Conditioning (A/C) Compressor - 4.6L in this section.
hope this helps

Aug 13, 2011 | 2004 Ford Mustang

1 Answer

How to install a 1999 yukon ac compressor


Hi.

Follow below...

jshreader_20.jpg

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Recover the refrigerant.
3. Remove the drive belt.
4. Disconnect the refrigerant hose assembly from the compressor.
5. Cap or plug all of the open connections.
6. Disconnect the electrical connectors, as necessary.
7. Remove the bolts.
8. Remove the compressor from the bracket.
9. Drain the compressor oil.
10. Measure the compressor oil. Refer to Adding Oil .

INSTALLATION PROCEDURE

1. Fill the compressor with oil. Refer to Adding Oil .
2. Install the compressor to the bracket.

NOTE : Refer to Fastener Notice in Cautions and Notices.

3. Install the compressor mounting bolts.

Tighten
Tighten the bolts to 50 N.m (37 lb ft) .

4. Connect the electrical connectors, as necessary.
5. Install the refrigerant hose assembly to the compressor.
6. Install the drive belt.
7. Connect the negative battery cable.
8. Charge the system. Refer to Refrigerant Recovery and Recycling, Adding Oil, Evacuating and Recharging Procedures .
9. Inspect the system for leaks.

I hope this helps.

Thanks...

Dec 03, 2010 | 1999 GMC Yukon

1 Answer

Need to change ac compressor need to know best way to remove


Check this two procedure for...

2.2L (VIN 4) Engine
  1. Properly discharge the air conditioning system into a recovery/recycling machine.
  2. Remove the drive belt on the vehicle.
  3. Remove the air cleaner and resonator assembly.
  4. Unplug the electrical connections from the compressor.
  5. Disconnect the negative battery cable.
  6. Unfasten, then remove and cap the A/C hose from the compressor.
Cap the refrigerant lines when opening the system to prevent the entry of dirt and moisture and the loss of refrigerant lubricant.
  1. Loosen the A/C compressor bolts, then raise and support the vehicle.
236a413.jpg

Fig. 3: Compressor mounting on the 2.2L (VIN 4) engine
  1. Remove the compressor.
To install:
  1. Position the compressor on the vehicle.
  2. Lower the vehicle.
  3. Install the compressor bolts, then tighten the front bolts to 37 ft. lbs. (50 Nm) and the rear bolts to 22 ft. lbs. (30 Nm).
  4. Attach the compressor hose using NEW sealing washers. Tighten the mounting bolts to 24 ft. lbs. (33 Nm).
Lubricate O-rings with refrigerant oil.
  1. Engage the electrical connections to the compressor.
  2. Install the air cleaner and resonator assembly.
  3. Install the serpentine drive belt.
  4. Connect negative battery cable.
  5. Evacuate and charge the system.
  6. Perform a leak test on the system.

3.1L (VIN M) Engine
  1. Properly discharge the air conditioning system into a recovery/recycling machine.
  2. Disconnect the negative battery cable.
  3. Remove the serpentine drive belt.
  4. Remove the front compressor bolts.
  5. Raise and safely support the vehicle.
  6. Remove the rear compressor bolts.
5121365.jpg

Fig. 4: Compressor mounting on the 3.1L (VIN M) engine
  1. Unplug and cap the coupled hose assembly from the rear of the compressor.
Cap the refrigerant lines when opening the system to prevent the entry of dirt and moisture and the loss of refrigerant lubricant.
  1. Disconnect the electrical connection at the compressor.
  2. Remove the compressor from the vehicle.
To install:
  1. Install the compressor on the vehicle, engage the electrical connection to the compressor.
  2. Install the coupled hose assembly to the rear of the compressor, with NEW sealing washers. Tighten the mounting bolt to 24 ft. lbs. (33 Nm).
  3. Install the rear compressor bolts. Tighten the rear bolts to 8 ft. lbs. (25 Nm).
  4. Lower the vehicle.
  5. Install the front compressor bolts. Tighten them to 37 ft. lbs. (50 Nm).
  6. Install the serpentine drive belt on the vehicle.
  7. Connect the negative battery cable.
  8. Evacuate and charge the system.
  9. Perform a leak test.
Hope this help (remember rated this).

Jul 09, 2010 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Installation for compressor / hyundai xg 350 l


Assuming you have HVAC experience and are licensed to perform this service, you'll first need to recover the R-134A refrigerant from the system (if there's any in it). If there isn't, you'll still have to vacuum before recharge (w/refrigerant & PAG oil). Is there a compressor presently installed?
If so, you'll need to recover any existing refrigerant. Then disconnect the High & Low pressure tubes from the compressor.
Remove the A/C drive belt
Remove the wire harness connector to the compressor magnetic clutch
Remove the 4 12mm bolts which mount the compressor to the engine
Raise the vehicle & remove the FR wheel, plastic splash guards (RH & lower - below the oil filter).
Raise the engine so to increase/clear space for removal of the compressor.
Installation of 2nd compressor is in reverse order.

PS. Some technicians perfer to remove the compressor from the top (requires removal of the radiator cooling fan & the alternator). Some have also removed the LH Exhaust Manifold to make it easier to reinstall the alternator & compressor.

Jun 21, 2010 | 2004 Hyundai XG350

1 Answer

Installed new air conditioning compressor in 2002 Pontiac Grand Prix - how much compressor oil do I need to put in?


If you have not cleaned out the ac system,the ac system will have oil in it,but,the compressor most likely does not have any in it,so pour about 4 to 5 oz in the low side opening on the compressor before installing it,and turn the center nut of the compressor clutch about 8 to 10 times,oil will try and come out the high side,when it does,this will be enough turning.If the system needs more oil,add as needed when freon is put in the system.If the oil is not added to the ac compressor before installing,the compressor could be damaged.Please rate if this was helpful,thank you.

Jun 11, 2010 | 2002 Pontiac Grand Prix

3 Answers

Installing compressor 91 civic do the lines have o rings or gaske


this honda uses o rings, these orings should come with the compresor,also you should replace the filter dryer when replacing the compressor,if the compresor locked up you may want to flush the system to get any metal chips out or it will destroy the new one, heres a picture of the filter dryer, its located next to radiator in engine area, good luck,881d179.jpg

Apr 28, 2010 | 1991 Honda Civic

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...