Question about 1991 Honda Civic
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You can't replace the wiper. But Parts department at any Honda dealer should sell the replacement blade (just the rubber part). I believe it was under $10. Good luck!
Posted on Aug 10, 2009
The skin is only spot welded in a few spots other then that is just a
sealer all around the skin holding it and protecting it at the seam.
Remove the door and inner panel.
Drilled out the few spot welds.
Wire wheeled the exposed sealer around skin on the inside door jamb.
Use scraper to slowly work the folded edge up 90 degrees.(anything slim and small would work)
(With the old one you could just grind the edge off.)
Carefully pulled skin off.
Few minutes of dolly and hammering around the now new door skin lip to create a perfect 90 degree shape all around with the edge just peeled up.
Apply sealant to new door shell edge.
Slide skin on and in exact location needed.
Clamp skin all the way around.
Remove a few clams on one side, start hammer and dolling extra lip back around the shell lip, when done put clamps back on, and keep going down the line in this order.
Let clams sit as long as the sealer you have used suggests.
Reinstall door. Read more at http://www.honda-tech.com/showthread.php?t=2474146&ktrack=kcplink
Posted on Dec 04, 2010
Tips for a great answer:
Apr 23, 2014 | 2006 Honda Pilot
Apr 27, 2012 | 2006 Honda Pilot EX
Feb 17, 2011 | 2006 Honda Pilot
Jan 14, 2010 | 2006 Honda Pilot
Oct 17, 2009 | 2006 Honda Pilot
Jul 16, 2009 | 2006 Honda Pilot
Oct 09, 2008 | 2006 Honda Pilot
Feb 11, 2017 | 1991 Honda Civic
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: