Question about 1995 Chevrolet Cavalier

1 Answer

Blinkers stay solid and dont flash, Hazards work fine.

Recently all of my blinkers started to quit working and when flicked on, they stay solid. The hazard lights however, work perfectly. The fuses and flasher are fine, I even replaced some of the bulbs but still nothing. Any idea's as to what i may want to check next would be helpful, or an website with free wire diagrams for this model.

Posted by on

  • Gary Loney
    Gary Loney May 11, 2010

    how do you know the flasher is fine? Did you replace it?

  • Anonymous Mar 13, 2014

    tailights dont work. dash lights r out. brake lights, blinker, and hazards work. checked fuses and bulbs

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

CHECK GROUND ON TAIL LIGHT HOUSING.

Posted on May 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinkers, highbeams, autolights and other circuts


You have bad switch if it were a bcm you would lose all of your lights

May 17, 2014 | 2005 Chevrolet Colorado

1 Answer

Turn signals not working on my 98 Mustang. Hazards work fine. Already replaced the multifunction switch. Didn't help.


Sounds more like the flasher to me,in the drivers side fuse panel
square box ,looks like a relay , 5 male spade connectors on back.

Mar 24, 2014 | Ford Mustang Cars & Trucks

1 Answer

Hazards dont work but blinkers do


Blinkers and hazards normally work on the same fuse. Sounds like the hazard switch has a problem.Get the hazard switch out and bridge the two connector wires to the switch. If the hazards then work the problem is in the switch.If it don't work you may have a problem in the wiring between the switch and the flasher relay.

May 05, 2013 | 2003 Ford F150 Regular Cab

1 Answer

The hazard light switch broke and my hazards won't quit flashing tired sticking two screws in there now blinkers don't work


At this point you will need to replace the multifunction switch. It looks like used may be a good option for your vehicle. This is a relatively easy part to replace. You will need a couple TORX sockets but other than that its pretty straight forward once you remove the column covers.

Apr 10, 2013 | Cars & Trucks

1 Answer

Blinkers dont work properly


start by looking for a bad ground to one of the light sockets

Jul 23, 2010 | 1997 Oldsmobile Cutlass Supreme

1 Answer

1992 toyota sr5 auto loaded blinkers quit working relay makes one click but no flash of any lights. indicator lights in dash dont come on and stay on as i have seen in the past when a typical relay goes...


check all the bulbs .... one is very likely burnt out that tends to happen. i would also consider that the known good relay could very well be defective too (it happens).

Jan 19, 2010 | Toyota Pickup Cars & Trucks

1 Answer

1984 monte carlo left blinkers are fine but


What you need is a new blinker module. They are a relatively cheap part that you can go to an auto parts store and get, and install yourself quite quickly with their instructions.

Jul 17, 2009 | 1984 Chevrolet Monte Carlo

1 Answer

1982 s10: brake lights, hazards, and blinkers do not work.


YOU MIGHT WANT TO CHECK THE BULBS IN THE REAR LIGHTS THEY OFTEN STOP WORKING IF THERE IS A BURNT ONE . IF NOT THEN CHECK TO SEE IF YOU CAN HEAR THE CLICK WHEN YOU ENGAGE YOUR SIGNAL EACH WAY IT MIGHT BE IN THE STEERING COLOUM WHERE IT CONNECTS TO THE SIGNAL ARM

May 20, 2009 | 1993 Chevrolet S-10

Not finding what you are looking for?
1995 Chevrolet Cavalier Logo

445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...