Question about 2008 GMC Acadia
How to change rear rotors GMC Acadia 2009
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
first are they HID
if just HALOGEN LIGHTS BULB
jack the vehicle up and remove the tire on the side you are replacing the light
remove the inner fender
you will see a round plug turn and remove then you will see the bulb
replace the bulb and reassemble
now if they are HID LIGHTS OR YOU ARE REPLACING THE WHOLE HEADLIGHT ASSEMBLEY
then the whole FRONT BUMPER FACIA HAS TO COME OFF
hope this helps let me know
Posted on Nov 15, 2009
Removal & Installation
Dust and dirt accumulating on brake parts during normal use may contain asbestos fibers from production or aftermarket brake linings. Breathing excessive concentrations of asbestos fibers can cause serious bodily harm. Exercise care when servicing brake parts. Do not sand or grind brake lining unless equipment used is designed to contain the dust residue. Do not clean brake parts with compressed air or by dry brushing. Cleaning should be done by dampening the brake components with a fine mist of water, then wiping the brake components clean with a dampened cloth. Dispose of cloth and all residue containing asbestos fibers in an impermeable container with the appropriate label. Follow practices prescribed by the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA) for the handling, processing, and disposing of dust or debris that may contain asbestos fibers.
The brake rotor can be removed without separating the caliper from the mounting bracket.
NOTE If the rotor is stuck to the hub, try using a slide hammer to free it.
WARNING Whenever the brake rotor has been separated from the hub/axle flange, any rust or contaminants should be cleaned from the hub/axle flange and the brake rotor mating surfaces. Failure to do this may result in excessive assembled lateral run-out (LRO) of the brake rotor, which could lead to brake pulsation.
Posted on May 06, 2010
Not necessarily, they most likely have rear rotors but they can come with drums.... but im willing to bet money that yours has rotors. And to answer your question if your brakes pads are still good then you defiantly do not need to change them if your rotors need to be machines. But why wouldn't you change them if you have everything apart. Pads are cheap under 30 dollars for the whole rear sets.
Posted on Jun 04, 2010
under the hood at the back of the head lights you can twist and unplug the bulb or they will do it at the part store for you most the time
Posted on Jul 29, 2010
Tips for a great answer:
Jun 09, 2017 | Buick Cars & Trucks
Aug 31, 2016 | 2009 GMC Acadia
Aug 07, 2015 | 2009 GMC Acadia SLT-1
Aug 24, 2014 | 2009 GMC Acadia
Mar 19, 2013 | 2009 GMC Acadia
Feb 19, 2013 | 2009 GMC Acadia
Mar 19, 2012 | 2009 GMC Acadia
Oct 20, 2010 | 2009 GMC Acadia
Jun 21, 2010 | 2009 GMC Acadia
549 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: