Question about 1992 Toyota Camry V6

2 Answers

How do I change the 3 spark plugs on the back of engine

I have 1992 Toyota Camry,V6,XLE.I need to find out how I change the 3 spark plugs and ignition wires on the back of the motor,against the firewall.PLEASE HELP ME!!!!!!!!!!!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

The upper intake has to be taken off to get to them. Yes it is a pain in the but, not too hard to do, just bothersome to do this to be able to change plugs. Make sure to be careful when loosening the intake as the head is aluminum and you can damage it if you take a gung-ho approach. You will need to replace the gasket but it is only around 12 -15 $ .

Posted on May 08, 2009

  • Brian Aug 12, 2013

    I just did this yesterday, and you do NOT need to remove the air intake. It was a pain, but there is just enough wiggle room to get it done. The #1 and #3 I accessed from the passenger side and the #5 I got on the driver's side. Smaller hands would have made it easier, but you need some strength to pull the wires off. I thought pulling the wires off was far more difficult than getting the plugs in and out.

  • Brian Aug 12, 2013

    Also, I used a wratchet with a long extension then a universal joint, then a short extension, then the spark plug socket. I used the spark plug wire to pull the plug back out.

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 39 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1991 Toyota Camry running rich after cleaning the throttle body and replaced the throttle positioning sensor. Checked for vacumm leaks but cant find any


92 camry failed smog because running rich. Why? - Toyota Nation ...

www.toyotanation.com/.../411132-92-camry-failed-smog-because-runni...

Apr 26, 2012 - 15 posts - ‎9 authors
off ignition timing, and the car was running to rich. the timing i will get fixed tomorrow but the rich .... Our 93 camry le with 4 cly engine failed agin a few weeks ago, both our toyotas always fail.. they are .... 1991 Toyota MR2 V6 91 MR2 N/A Rough Idle, Running Rich, No Accelleration
10 posts
Apr 24, 2012
Celica 1991- Insane gas consumption/running rich
10 posts
Jan 24, 2011
22RE Running Rich, didn't pass smog
10 posts
Apr 25, 2010
1998 Camry 5SFE 4-cyl idle long-term fuel trim
15 posts
Sep 11, 2007
More results from www.toyotanation.com

Toyota Camry running rich Questions & Answers - Fixya

www.fixya.com > Forum > Tags > running rich > Cars & Trucks > Toyota
... running rich I have a 1991 Camry that is running rich. I just replaced the O2 sensor and a new cat, oil change, new spark plugs. The car wont pass smog. it is ...

1992 Toyota Camry XLE V6 Excessive Running Rich ...

? 0:21
https://www.youtube.com/watch?v=WPTCtLwr61g
Aug 16, 2013 - Uploaded by StreetSports1
1992 Toyota Camry XLE V6 Excessive Running Rich ... 1997Toyota Camry V6 forward Oxygen (O2) Sensors .

Jan 11, 2016 | Toyota Cars & Trucks

1 Answer

I need spark plug type for Toyota Camry V6 engine 1vz


There is no specific type of spark plug. You can go to any parts outlet and purchase the plugs based on the information of the vehicle. Let me know if this is helpful, thanks.

Jan 27, 2011 | 1992 Toyota Camry V6

1 Answer

I have a 92 camry 4cyl. Won't fire at the sparkplug. Replaced plug wires and plugs, distributor, igniter and still won't fire. Any suggestions?


Take out a spark plug, lay the plug (with the spark plug wire attached)on the engine and turn the motor over, if it sparks, your getting fire, Try each plug, works best a night so you can see the spark.

Sep 11, 2010 | 1992 Toyota Camry V6

2 Answers

1992 Toyota Camry XLE / air direction control issue


the control is opperated with engine vacumn, check for a hose cracked or come loose in the engine bay, the controller is in the dash,behind the adjustment knob, it may have a hose off or need replacement.

Apr 15, 2010 | 1992 Toyota Camry V6

1 Answer

I need a spark plug wiring diagram for a 1992 Toyota Camry, 4 cylinder, 2200 motor.


I believe your firing order is 1-3-4-2. You may see a number 1 on the distributor cap on this vehicle. That is the #1 plug wire. The wire hole next to that would go to spark plug 3 etc. Easiest way is to change wires one at a time. Hope this helped.

Mar 29, 2010 | 1992 Toyota Camry V6

3 Answers

I need a spark plug wire diagram for a 1992 Toyota Camry 4 cylinder


1992 Toyota Camry Sedan
3.0 liter DOHC V-6 (3VZ-FE)

Cylinder # Front, passenger to drivers side 2-4-6
Cylinder # Back, passenger to drivers side 1-3-5

Distributor 12 O'clock post # 6 cylinder
10 O'clock post #1 cylinder
8 O'clock post #2 cylinder
6 O'clock post #3 cylinder
4 O'clock post #4 cylinder
2 O'clock post #5 cylinder

Good luck and hope this helps.

Jan 12, 2010 | 1992 Toyota Camry V6

1 Answer

1992 Camry v6 XLE: Started engine this morning,


Is it coming from the driver side, passenger side, front or rear of the engine? It could be a cam or crank seal if it is coming from the passenger side behind the plastic timing cover.

Oct 07, 2009 | 1993 Toyota Camry V6

1 Answer

Air Condition


The low-pressure side recharge valve was changed with the conversion to 134 so it is nearly impossible to use the wrong stuff.

I found this discussion that indicates your car requires R-12 if it has not been converted:

http://en.allexperts.com/q/Toyota-Repair-832/1992-Toyota-Camry-C.htm

Jul 06, 2008 | 1992 Toyota Camry V6

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

Related Topics:

1,535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...