Question about 2001 Toyota Celica

2 Answers

What are the high and low pressure specs for my a/c

What is the low and high a/c specs for 2001 toyota celica

Posted by on

  • kris vis
    kris vis May 11, 2010

    you need the manual luckily i have alot of import stuff like the dealer ship cdrom to a 2000 celica hold up its loading thousands of pages ...

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 76,630 Answers

Low pressure spec is around 28-32 PSI with compressor turning off at 28 PSI, high pressure is dependent on ambient temperature, anything from 150-300 PSI, the hotter the day the higher the pressure.

Posted on May 07, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toyota Master
  • 599 Answers

This really depends on the ambient temp,but as a rule low side 35-45 psi high side 150-170 but this depends on the ambient temp or the temp at the condenser, hope this helps if not get back to me and we'll go from there. please rate my fix as i strive to be the best

Posted on May 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which port do I use high or low to fill a/c


LOW,the bigger diameter line is the low side. The kits from the
parts store will only fit the low side ,they are a different size.
So if you have a kit from napa or somewhere you are safe.
The hi side has like 300 psi while running so hooking up to that would
be trouble!

Apr 12, 2013 | 2001 Toyota Celica

2 Answers

I have a 2001 toyota celica gt. both front headlights will not come on. the high beams work. the car was hit in the front. does the headlight circuit have a fuse or a relay and where is it located. i found...


Have you checked the light globes ? The globes have a filament for each of Low and High Beams and the Low Beam ones fail much sooner than the high. A bump as you describe may have been enough for the Low beam filaments to fail as the filaments get brittle through age.

Sep 07, 2010 | 2001 Toyota Celica

2 Answers

I need the specs for high and low side air cond. System pressures for my 95 toyota camry.


Depending on the temp outside low side should read between 30 - 55 and high side is 225 - 250

Jun 19, 2010 | 1995 Toyota Camry

1 Answer

My a/c in my 2001 toyota celica is not working


I believe the a/c light flashes on toyota products when the low pressure switch is activated due to the system being low on refrigerant. You should have the system checked and provided it is just low on refrigerant; the a/c will work once the proper level of freon is added and enough pressure has built up to turn off the low pressure cut off switch.

Jun 14, 2010 | 2001 Toyota Celica

1 Answer

What is are the correct headlight alignment specs for a 2001?



Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Oct 20, 2009 | 2001 Toyota Celica

1 Answer

I wanna know how to do, the headlight alignment for a 2001 toyota celica gt


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Oct 06, 2009 | 2001 Toyota Celica

1 Answer

I need to know which line is the pressure hose for power steering on my 92 celica gt.


the high pressure hose is usually the smaller diameter hose,if they are both the same size look for the hose that is just clamped on instead of bolted on and that would be your low pressure hose,hope this helps

Sep 05, 2009 | 1992 Toyota Celica

Not finding what you are looking for?
2001 Toyota Celica Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...