Question about 2006 Nissan Altima

Open Question

2006 nissan altima fuse box diagram replace low beam

What fuse number

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
johnny5846
  • 379 Answers

SOURCE: replacing low beam head light on nissan altima

your welcome , glad to have assisted you

J5

Posted on Jan 21, 2009

Ad
mrgreenz
  • 962 Answers

SOURCE: fuse box cover is missing

Check ALL the fuses for any burned out ones. With the fuse remover clip or needle nose pliars they can easily be removed. Unless you buy a diagram online or at a store. that;s the way to go.

Posted on Apr 08, 2009

  • 1596 Answers

SOURCE: '91 Nissan low beam

What you have sounds like a Headlight SWITCH Problem, You can check the Fuse for them (DOUBTFULL) but its a Large one @ Power distribution Box Under Hood.

Posted on Jul 12, 2009

  • 291 Answers

SOURCE: How do I find a fuse box diagram for a 2006 Nissan Murano

FIRST REMEMBER THERE ARE SEVERAL FUSE BOXES.. NORMALLY THE CIG FUSE IS IN THE UNDER HOOD POWER DISTRIBUTION CENTER OR FUSE BOX.... A VERY GOOD RULE OF THUMB I HAVE FOUND IS TO CHECK ALL THE FUSES IN THE FUSE BOX....THIS USUALLY PREVENTS CHECKING THE WRONG FUSE AND IT ONLY TAKES A SECOND TO DO IT

Posted on Sep 01, 2009

  • 1 Answer

SOURCE: Lost Fuse Box Diagram - Altima 2005 2.5L

i need to know what ENG CONT AND ENG MTG means on the fuse box of my 2006 altima.

Posted on Jan 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 nissan altima fuse box diagram


Please, please, please DO NOT post an answer if you do not know the answer. Nissan does not supply clear descriptions for its fuses!!! The use descriptions that are cryptic and confusing. That is why someone is asking - which fuse does what? For example, I have spent 2 hours trying to find out which fuse is for the power windows and I hate it when some (not)know-it-all says to look for the fuse labeled windows - there is no fuse labeled windows or horn or anything else that would be helpful. If you are not familiar with Nissan fuse boxes - just don't answer!

Dec 11, 2012 | 2006 Nissan Altima

2 Answers

Where is my driver side headlight fuse located for my 2006 altima


There is a fuse for the high beam and a separate fuse for the low beam. Nissan came out with what I call kind of a hidden fuse panel which is located on the right (passenger) side of the vehicle. Nissan calls it an IPDM (intelligent power distribution module). It is located under the coolant resivour (can't spell). In any case below are some pictures and instructions on how to get to and remove it. Also is a picture of the fuse layout that is in there. The fuse for the high beam is the one marked with a red arrow and the fuse for the low is marked with a yellow arrow. If you need a larger picture(s), feel free to email me at csautomotivecars@att.net with all your information and I will be happy to send it to you. If both high and low beams are out you may be looking at a wiring issue. Hope this helps.....


9_2_2012_5_09_30_pm.jpg
9_2_2012_5_09_56_pm.jpg9_2_2012_5_10_12_pm.jpg9_2_2012_5_10_28_pm.jpg

Sep 02, 2012 | 2006 Nissan Altima

1 Answer

Where is the fuse box for the driver side headlight


Nissan calls that box that any fuses for the headlights the "intelligent Power Distribution Module (IPDM)". Now you have a seperate fuse for the high and low beam so I wasn't sure what you needed and if both are out you will need a wiring diagram to check to see what the problem is. Below is a diagram of the fuses in the IPDM. The fuse for the high beam is in the number 38 position and the fuse for the low beam is in the number 45 position. There is also a separate relay for each in that same panel but they can not be removed. They are part of that whole unit. Also below is instructions on how to remove the IPDM including pictures. If you are in need of anything else such as the wiring diagrams of any other information, feel free to email me at csautomotivecars@att.net. I don't mind helping and I should have pretty much any information you need from the factory service manual and the info would be free. I just want to pre-warn you that Nissan has made it quite difficult for the regular "Joe" to work on this vehicle because a lot of things such as your headlights go through a body control module as well as they use what the call a CAN system which in plain terms means things are mostly controlled by a computer and many thing need to be tested with proper equipment. I'm hoping it's just a fuse. The reason the fuse blew (if it did) could be a whole other issue. I hope this helps and good luck.


clifford224_424.jpg

clifford224_425.jpg
clifford224_426.jpg
clifford224_427.jpg clifford224_428.jpg

Sep 01, 2011 | 2006 Nissan Altima

1 Answer

Where is the fuse located for a 2002 nissan altima drivers side low beam? THANKYOU


There is no fuse for a low beam. If the high beams are working and the low beams aren't then it blew the low beam filament.

Mar 08, 2011 | 2002 Nissan Altima

2 Answers

2006 Nissan Altima LH driver side headlamp will not work. Replaced bulb & still will not light. Fuse box diagram insn't marked for headlamps. what could be the problem?


you will find another fuse block under hood near windshield washer fill neck.remove the cover and it will show the location of headlamp fuses.most likely is a blown fuse.

Feb 20, 2011 | 2006 Nissan Altima

1 Answer

I have a 2006 altima and the low beam on the drivers side won't work i changed the bulb but noticed i had no power


these are fused individually right and left side and high and low beam for a total of four fuses controlling head lamps.fuses are located in black box near coolant reservoir and wiper washer fill.remove cover to access.location of fuses is marked on side of cover .i think you will find a blown ten amp fuse .i hope this helps.please let me know how you make out.

Feb 14, 2011 | Nissan Altima Cars & Trucks

2 Answers

Lowbeam driver side light will not light even with new assym.


check fuses in box near coolant reservoir.fuses should be marked on box cover.hi/lo and left and right fused individually for atotal of four fuses for headlamps.

Feb 03, 2011 | 2002 Nissan Altima

1 Answer

'05 Nissan Altima Low Beam not working


Need to disconnect ground to battery before replacing light bulb or fuse will blow. Fuse is located in engine compartment next to windshield washer fluid.

Jan 06, 2010 | 2005 Nissan Altima

2 Answers

Lost Fuse Box Diagram - Altima 2005 2.5L


i need to know what ENG CONT AND ENG MTG means on the fuse box of my 2006 altima.

Dec 30, 2008 | 2006 Nissan Altima

Not finding what you are looking for?
2006 Nissan Altima Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75842 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...