Question about Volkswagen Passat
Is there a fuse for this or do I have a wire broke some place?
Check the wire plug in the door there is a black rubber the wires are in there this is a common place for the wires to snap. if the wires are snaked you will need to replace them, you do this by taking out the side part on the A post inside and find the wire loom to the door. peal the seal back over the connector for the door part and cut out the bad wires and solder the new wires in to the connector replace the hole wire into the A post wiring loom. don't just try to fix the broken wires as this will cause wiring problems later. make sure you match each wire to its right color, when finished use some sealant on the plug end to seal your solder points. and insulation tape on the other end to the loom. then reconnect to door and check its working if all working pull the rubber seal back over and put some sealent on the end if it needs it.
Posted on Nov 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
All of the power locks and power windows are directly ties into the "Integration Relay". This is the large white box behind the fuse panel under the dash. There are 2 different Integration relays, one with electric windows, and one without them. You may need to change the integration relay, also.
Posted on Feb 24, 2009
I had this problem as well as 33 others I've spoken to online. The main floor harness runs thru the drivers side front fender and plugs into the drivers door. The harness in 1996 civics are an inch or 2 too short so after a few years a few of the 25 thru 27 wires in the plug #C556 either break off or pull out of the plug. Since the drivers door contains the master power window and lock switches and the power mirrors can also be affected it can seem like everyones problems are in different parts of the car but they are all part of the same default. So I went to ebay and purchased a floor harness with full power options and installed it myself. Until my part came in I just went to a junk yard and cut off a good plug then spliced it into my existing floor harness. Hope this helps. It took me 4 months to figure this problem out!!!
Posted on Feb 17, 2010
Tips for a great answer:
Nov 01, 2012 | Cars & Trucks
Oct 10, 2012 | 1994 Buick LeSabre
Apr 04, 2012 | 2000 Ford F250 Super Duty Crew Cabs
Jan 01, 2011 | 1999 Volkswagen Passat
Sep 05, 2010 | 2003 Chevrolet Suburban
Mar 03, 2010 | 2002 Volkswagen Passat
Jan 19, 2010 | 2006 Volkswagen Passat
Sep 09, 2009 | 2000 Volkswagen Passat 4Motion
Sep 09, 2009 | 1999 Volkswagen Passat
Sep 07, 2009 | 2000 Volkswagen Passat 4Motion
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: