Question about Toyota Sequoia
Was making a running noise would stop when closed in or car was not running.now it is not making any noise but mirror will not move automatically.
Check for burnt fuse. Check for loose, corroded, burnt or melt connectors at rear of the mirror switch and within the mirror assembly.
Also jiggle the wire harness at different points while keeping the ignition switch at ON position
Posted on Nov 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you are facing the passenger side mirror adjust the top (large) mirror so that it is turning in towards the truck as far as it will go. Then look behind the mirror in the bottom righthand corner (outside bottom corner) and you will see a silver metal clip. Take a straight head screw driver and push on that clip and the lens will pop out. Then you simply unscrew the bulb holder from the lens and replace your bulb. Good luck!
Posted on Oct 27, 2008
The power folding function of your exterior mirrors on your '04 H2 depends on a plastic gear to collapse those mirrors at the touch of a button. That plastic gear strips very easily. The service adviser at our Hummer dealership said that problem was rectified in later model years with a redesign of of the collapsing mechanism of those mirrors.
I don't mind manually folding our mirrors, and I was afraid to ask about the cost of the parts required to solve the issue. The service guy didn't volunteer the cost of the fix. Not typically covered by aftermarket extended service/warranty plans.
Posted on Aug 02, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Jun 03, 2015 | 2001 Buick LeSabre
Feb 04, 2014 | Jeep Cars & Trucks
Sep 30, 2013 | Honda Fit Cars & Trucks
Dec 09, 2012 | 2006 Kia Sedona
Aug 25, 2012 | 2003 Lincoln Navigator
Dec 04, 2008 | 2007 Volkswagen Golf
Oct 16, 2008 | 2008 Ford F-350
168 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: