Question about 1999 Mercury Mystique

Open Question

My mazda etude overheated i changed gasket and skimmed cylinderhead but stil havin low power and going off when hot

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi my Mazda etude 1999 model is overheating oil the water is boiling in side the cooler once you switch off the engine but inside the deshboard the heat gaurd its normal so I don't know what wrong

Sounds like you may have a blown head gasket. If there is oil in the coolant, and musty brown look and smells bad that's the culprit. I would do a rad flush and oil change and see what happens next...

Dec 21, 2016 | Mazda Cars & Trucks

1 Answer

My Mazda etude is showing overheating though fans are working, what maybe the problem?

there are a few things that come to mind. the water pump is bad, the radiator is clogged or leaking, you dont have enought coolant, the thermostat is bad. go through each of these .

Feb 01, 2015 | Mazda Cars & Trucks

2 Answers

Guys I've got a problem with a ford bantam 1.6i 2003 model rocam engine, its overheating even though the cylinder head was skim but it still overheating. please assist!

Check what head gasket was used . I suspect that an after market gasket was used. If that is the case there will be holes in the block and head thet have no matching holes in the gasket thereby causing the problem

Jan 07, 2013 | 2006 Ford Bantam 1.6i

1 Answer

On hot days the etude cuts out whilst driving, after +- 20 minutes it starts again and drives as if nothing is wrong.

I have seen corrosion problems inside the coil end of coil wires on slightly older Mazdas. not sure if yours has a distributor or not, but if it does, this type of corrosion could be overheating the coil. would suggest if applicable, replacing both the coil, and the spark plug wires.

Aug 17, 2011 | 1999 Mazda 626

2 Answers

Engine overheating

All i can think of is the thermostat is not opening. or you may have a clog somewhere preventing the flow. Check the T-stat and hoses and radiator ( for clogs) Good luck

Apr 25, 2009 | 1990 Mazda 323

2 Answers

Mazda Etude 160ie timing

I have a problem with the mazda etude 160ise, the crank shaft sensor was damages and replaced it ad now the car cant tart. Note that the timing was afected in that the two sealings were replaced. Could one please provide information as to how I can get in timing and get it going again.

Jan 02, 2009 | 2004 Mazda 3

2 Answers

I just put a new radiator and thermostat on my car an it is still overheating. Do you know what the problem is?

Have you checked the water pump and connections to it? Just had similar problem with mine and that was it.

Jul 28, 2008 | 1988 Mazda 323 Hatchback

Not finding what you are looking for?
1999 Mercury Mystique Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

79186 Answers


Level 3 Expert

5677 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides