Question about 1998 Lincoln Town Car

Open Question

What size wrench for drain plug for a 98 lincoln town car

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 701 Answers

SOURCE: Thermostat

Hello angelaschame: My name is Roger and I will answer your question. After opening the hood remove the top plastic engine shield. Follow the top radiator hose back to the engine. Remove the two bolts at the housing. Lift off the housing and you will see the thermostat. Reverse the procedure to install a new thermostat. Should you need further help please just ask. Please rate the quality of your answer as this helps insure you received the information you asked for. Thank You for using FixYa. Roger

Posted on May 01, 2009

Ad
heavymetal77
  • 721 Answers

SOURCE: changing spark plugs on lincoln town car

Remove the spark plug wires, remove the spark plugs,replace them. Do this one cylinder at a time if you never did it. On that year you may need to remove the upper intake to access the plugs on one side. In that case go to a shop. This would not be a novice job.

Posted on Jun 28, 2009

  • 1129 Answers

SOURCE: locatio of inertia switch 1990 lincoln town car

Check just above the carpet on the passenger side where your feet go under dash.

Posted on Jul 02, 2009

warlock61
  • 659 Answers

SOURCE: need to locate blend door actuator 98 lincoln

it is located on top of the heater box assy behind the dash just to the left of of the glovebox if you open the glovebox and look to the left you can see it

Posted on Jul 11, 2009

ftw1952
  • 10319 Answers

SOURCE: 98 lincoln town car won't start. fuel pump

the enginr oil pressure switch runs the fuel pump till the oil pressure is up to the normal operating range. When the pressure is up the relay kicks in and takes over the power to the pump. The oil pressure switch my be at fault if you can no hear the pump running when you turn the key on

Posted on Jan 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Thermostat replacement 1996 Lincoln town car


Instructions
    • 1 Place a large drain pan beneath the radiator drain on the passenger side of the Town Car. Open the hood and remove the radiator cap.
    • 2 Loosen the radiator drain plug using a wrench. Wait until the coolant is below the level of the upper radiator hose.
    • Sponsored Links
    • 3 Trace the upper radiator hose to the thermostat housing. Loosen the hose clamp on the housing with a flat-blade screwdriver. Slide the clamp back and remove the hose from the housing. Use a wrench to remove the two mounting bolts from the thermostat housing.
    • 4 Slide the housing off of the intake manifold. Clean any remaining gasket pieces from the thermostat housing with a flat scraper and clean rag. Remove the old thermostat from the housing.
    • 5 Insert the new thermostat into the housing. Position the new gasket on the outer edge of the housing and position it over the mounting area on the intake manifold. Replace the two mounting bolts and tighten them using a wrench.
    • 6 Replace the upper radiator hose on the thermostat housing and tighten the hose clamp. Top off the radiator with a blend of equal parts antifreeze and distilled water. Replace the radiator cap.


Read more : http://www.ehow.com/how_6319041_change-1996-lincoln-town-car.html

Mar 03, 2015 | 1997 Lincoln Town Car

Tip

How To Install Replace Broken Sway Stabilizer Bar End Link Lincoln Town Car...


<span style="font-weight: bold;">How To Install Repair Replace Broken Sway Stabilizer Bar End Link Lincoln Town Car 98-02 1AAuto.com<utube src="8mkGPCQ-jTM"></span>

on May 20, 2011 | Lincoln Town Car Cars & Trucks

1 Answer

Oil pan drain plug size buick century


Here's a link to your drain plug,it says to use a 15 mm wrench or socket.

Mar 12, 2013 | Cars & Trucks

1 Answer

1990 lincoln town car - broken radiator drain plug


If your saying the handle broke off the plug, drill 2 holes in the plug and stick 2 nails in the holes. Turn the plug with an object between the nails.

Aug 07, 2012 | 1990 Lincoln Town Car

1 Answer

What size wrench do I need to remove the rear bolt on the bracket over the fues rail replacing the intake manifold?


I'm sorry but I do not know what size wrench you need for that. You might call a Lincoln dealership and see if they know. A workshop manual might also have that information. Good luck!

Dec 26, 2011 | 1999 Lincoln Town Car

1 Answer

How do i remove a 2000 lincoln town car fron seat


There are 4 screws on each corners. Remove the plastic cover first and you will see them. They are in different size; the large one can be as big as to 18mm, and you need a longer wrench socket. Move the seat back and forth to access the screws.

Aug 29, 2010 | 2000 Lincoln Town Car

1 Answer

Can you tell me where is the fuse for my horn, I have a 98 executive series town car


if you check in your owners manual in the section under fuses,it will tell you what size and location of fuse box,and what each fuse is for

Jan 04, 2010 | 1998 Lincoln Town Car

1 Answer

How do you change sensors 02 and where are they located on 2004 Lincoln TC Ultimate? Thanks


jack up the front of the car both sides using jack stands to support vehicle on frame rails. then locate sensors usually either on the exhaust manifolds or just below on the pipe coming out of the engine exhaust manifold, unplug wire from sensor and use the appropriate size box end wrench to remove sensor occasionally a map gas propane torch must be used to heat the old sensor up for 3-5 minute before it can be removed, if the plug is to big to fit through the box end side of wrench cut the wires to slide wrench over sensor

Jul 03, 2009 | 2004 Lincoln Town Car

Not finding what you are looking for?

Open Questions:

0 Answers

98 Lincoln TC,Cold starts fine ,runs good until warm, then shuts off. No codes,Cranks ok, have spark, PATS ok. No fuel pressure, cant hear fuel pump prime,New Fuel relay. jumped fuel pump - works. I do not hear fuel pump prime up, do not have fuel gauge, but pressing on valve in fuel rail- no pressurized fuel. Fuel regulator seems ok, not leaking / vacuum line dry as a bone. If I let it set for 15 min , it will start up again, but for a few minutes then dies out. If I let it set overnight it starts up perfectly and runs until operating temp is reached then stalls/stumbles, and shuts down. Vacuum is good while cranking, even with no start, Checked Inertia switch in trunk, it is not tripped. I have seen Ford TSB summaries' that mention issues like this , but I am not able to see to description. A point to add, the MAF sensor was cleaned, then I decided to replace it and did not make a difference. I do not have any stored codes, and the PATS is working fine, typical 2 second flash from and once key is inserted a 3 second steady light, then disappears. I have seen the TSB mentioning C103 Connector, it looks fine, I swapped out fuel pump relay with ac relay, still no difference.mention of wires around battery, do not know where to start. in dash service engine light and odometer is normal, seen other posts the say they only have lines, but mine is ok. the start of all of this , I washed engine with regular garden hose, ( not using pressure washer).also in the mean time, rear window defroster stopped working as well, can not say for same reason, but a mention.My problem started after washing engine. this is one of four Panther platform vehicles I owned with exact 4.6l w code engine, which I rinced down before. The only sensor I can think of is Oil pressure , or a corroded wire

Feb 27, 2017 | 1998 Lincoln Town Car

See all 1998 Lincoln Town Car Questions

1998 Lincoln Town Car Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...