Question about Peugeot 505

Open Question

Remove gearbox how can i remove gearbox for 505 peugeot without taking the engine out

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how do i remove a gearbox from a 2004 mini

you can remove gearbox without eng
just done it !
you have to remove subframe and tilt eng
and it comes out of side

Posted on Jan 24, 2009

  • 6 Answers

SOURCE: Peugeot 406 HDi jumps out of 5th gear

sometimes a nut comes loose behind the end cover on ml5 box.

Posted on May 04, 2009

  • 1 Answer

SOURCE: Removing a Matiz engine without the gearbox

Yes it can be done. I removed the battery and tray and gearbox mount only then was able to wriggle the motor out (after removing sarter,alternator,power steering and air con compressor). Also removing the plastic cover near the front pulley helped. Need small hands! Good luck!

Posted on Jun 11, 2009

SOURCE: 505 wont start fuel not being injected

your injectors may need replacing

Posted on Jul 23, 2009

  • 12 Answers

SOURCE: BEARINGS WORN IN GEARBOX

disconnect lower arms, and remove driveshafts..disconnect all wiring and remove bolts from gearbox bellhousing and remove gearbox from underneath the car

Posted on Aug 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do i need to drop gearbox to do clutch on peugeot 607


No, you can't - there's no way to take the clutch out when your gearbox is still in engine bay - no place to put torx screwdriver, plus no way to pull the clutch off.

Jan 04, 2013 | Peugeot 607 Cars & Trucks

1 Answer

Peugeot 505 1990. No resistance at clutch pedal. Hydraulic fluid ok to cylinder at flywheel. Removed this hydraulic cylinder and lever going to clutch itself. This leaver has little or no spring? I am not...


replace the clutch master. clutch master is a set of springs and rubbers located inside your hydrovac that is responsible for pushing your clutch fluids

Aug 17, 2011 | 1987 Peugeot 505

1 Answer

My Peugeot is a 505 stw it is leaking oil from the gaskets how can i fix it???


clean out the engine breather system as if the gauze filter is gummed up this will make it leak oil due to internal pressure build up .if this doesnt work then its a complete engine rebuild

Aug 16, 2011 | 1988 Peugeot 505

1 Answer

Remove front door locking mechamism from a 505 peugeot


U will have to remove door panel to gain access

Jul 14, 2011 | 1991 Peugeot 505

1 Answer

How can I change the gearbox oil on a peugeot 806 manual vehicle the reg is 1996 I have had to put in a different model and year on the form as my car is not available as an option. My car is definatley a...


MOST MANUAL TRANSMISSION BEFORE CHANGING FLUID YOU DRIVE CAR AROUND.TO WARM THE OIL.SO IT WILL DRAIN OUT EASILY.NOW SAFELY RAISE VECHICLE AND SUPPORT IT ON JACK STANDS.LOCATE DRAIN PLUG ON DIFFERENTIAL PORTION OF THE CASE.GET SOME RAGS ON HAND.AND A DRAIN PAN.PLACE THE DRAIN PAN UNDER TRANSMISSION. REMOVE THE DRAIN PLUG.LET THE OIL DRAIN.WHEN FINISH.PUT IN NEW GEARBOX OIL.

Sep 06, 2009 | 1991 Peugeot 505

1 Answer

505 wont start fuel not being injected


your injectors may need replacing

Jul 23, 2009 | 1987 Peugeot 505

1 Answer

Peugeot 505


Unlikely! Crankshafts dont generally 'go'. Most likely is the starter solonoid is not firing and engaging the starter into the flywheel. Take the starter off and try operating it alone. Equally check that the cam belt hasnt snapped/shredded.

Jul 04, 2009 | 1983 Peugeot 505

2 Answers

Gearbox


its not hard, same as usual car, o/s drive shaft, u have to undo the 2 11mm bolts on engine mount, with a large chisel and hammer hit the shaft, there is a steel collar around the shaft, hit it there hard to push it out of the engine mount.

Apr 26, 2009 | 2006 Peugeot 505

1 Answer

Peugeot 406 HDi jumps out of 5th gear


sometimes a nut comes loose behind the end cover on ml5 box.

Feb 21, 2009 | 2005 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...