Question about Cars & Trucks

Open Question

Chevrolet faults I have a Captiva, the Chev Captiva dash lights stay on after starting, hill descent, stability system, at times when reversing in the car park it fells as if the rear diff is locked, then going forwards straight ahead it seems fine, abs light stays on, they have recently, just come from a 135000 service and there seems to be no end to the problems, Delta says its needs new rear ABS sensors, can you help?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: How do you reset service stability control & ABS

please send $100 to me and ill send you solution.. I was interested in your service until i heard some of your answers like requires expert must take to pro??? gee thanks for $15 advice

Posted on Sep 26, 2008

Ad
tripletauto
  • 1450 Answers

SOURCE: shows ABS fault on dash and ABS light stays on

Check your abs connectors they might have pulled a wire loose

Posted on Nov 11, 2008

  • 116 Answers

SOURCE: Dash board parking brake and ABS lights stay

you have an abs fault. have your abs system scanned for codes.

your base brakes will continue to function normally

Posted on Apr 13, 2009

  • 1 Answer

SOURCE: warning lights staying on after engine started

probably the shuttle valve in the ABS unit is defective, solution renew shuttle valve, dont let dealership sell you a new ABS unit very expensive

Posted on Apr 21, 2009

Keith100881
  • 74 Answers

SOURCE: ABS light stays on

that has four wheel anti lock so your gonna need to either take all them off and clean ends it may correct the problem but more than likely your gonna have to take to a large shop that has abs computer to find which sensor is bad then correct the problem

Posted on May 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chev captiva 2015 wiring diagram as vehicle has burnt out wiring


geee
2015 ....to new for a burn out thats bad luck

Chevrolet Captiva Wiring Diagram

hardwick.io/doc/chevrolet-captiva-wiring-diagram.pdf


if not an insurance claim

best solution for a burn out fix like that is
source a full car loom from a wrecker
and fitting that in




26340248-ck52p2o2klengxcuf105rj3q-1-0.jpg

Nov 04, 2016 | Cars & Trucks

1 Answer

My chev captiva 2.4 petrol, it start nicely but it dsnt want to rev high, it shows code c3fa9


if it will not rev high , it could be in the limp mode or the rev limiter has failed
find what the code refers to and fix the fault

Oct 22, 2015 | 2010 Chevrolet Captiva 2.4

1 Answer

2007 gmc serria service stability traction system and traction control light stays on


Do that---tells you the system with fault &
so does your owners manual


Check for codes, You have dash lights on,
same procedure every time you have an obd
system fault

Nov 26, 2012 | Cars & Trucks

1 Answer

2007 chev tahoe revere lights stay on


the fuse for the reverse lights is located on the underhood fuse block. Look for the fuselabel VEH Backup and it's 10amps. If the ignition is switched off, transm in Park, and the reverse lights still on, try removing this fuse. The reverse lights shoud be off, which means the wiring from the fuseblock going to the reverse lamps is not the fault. If the lights stayed on after removing the fuse, then you have two possible culprits. The underhood fuseblock may be shorted, or a BCM (Body Control Module) that is malfunctioning. This is assuming that the wirings going to these components are normally sound. This requires thorough testing procedures.. goodluck and have a nice day. : )

Nov 06, 2010 | 2007 Chevrolet Tahoe

1 Answer

The hill descent, abs and tracking lights have come on two times within the last week. They come on while driving and will not come back on when the engine is started.


Suggests either Wheel Bearing, ABS Sensor Fault, or Shuttle valve. Best to get it to a dealer and on the computer for them to diagnose what exactly is wrong.

Feb 10, 2010 | 2003 Land Rover Discovery

1 Answer

I have a 99 Discovery II and the Traction Control, Hill Descent Control and ABS lights have suddenly come on. What is the system fault or, in the alternative, how can they be reset?


Can't be reset if your ABS system or some component is faulty. check speed sensor on the wheel bearing, is there any rubbing or dull grinding noise coming from the front wheels? could be the entire bearing and speed sensor assembly has gone bad. this would cause all these faults to appear as that sensor triggers all these events in order to slow your vehicle while it downshifts itself and applies breaking to control the vehicle as a part of the stabilization system. The alternative is that the ABS system is not functioning properly and the trac control and hill decent systems are being deactivated as part of the fault. If the system cant apply breaking then the systems are rendered unavailable. the vehicle will stop but not using ABS just regular breaks. Check all ABS break fuses for damage.

Dec 12, 2009 | 1999 Land Rover Discovery

2 Answers

2004 Landrover Freelander stop/reverse light fuse keeps blowing


I had a persistent problem of hill light warning and TCS warning lights coming on for no apparent reason. There is a wire connection between the stop light switch and the control unit to let the system know when brakes are being applied. Changing the stop light switch cured it. The replaced switch was certainly sticking and the new one was of a different design. Replaced it myself as switch comes with a wiring loom. Need to get on your back under the steering wheel! Not very expensive. My car 2001 TD4

Les

Jun 19, 2009 | 2004 Land Rover FreeLander

2 Answers

Discovery warning lights staying on after engine started


try disconnecting the positive side of the battery for about ten minutes. My 2000 neon was doing the same thing. If there is no actual problem, electrically, then the lights should go out the next time the computer does a check of the car. Hopefully there is no actual issue. See if there is moisture around or in your fuse/relay box or dash. I'm not that experienced in the electronics department, so that is all the info I can in knowledge suggest.

Mar 08, 2009 | 2000 Land Rover Discovery

3 Answers

Warning lights staying on after engine started


probably the shuttle valve in the ABS unit is defective, solution renew shuttle valve, dont let dealership sell you a new ABS unit very expensive

Mar 08, 2009 | 2000 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...