Question about 2007 Lexus LS 460 L Sedan

Open Question

Brake sensor warning needs reset - 2007 Lexus LS 460 L Sedan

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replace brake pad light on, how do you reset it?


you need to replace the pad wear sensor when the pad wears down it wears the sensor and the sensor needs to be replace if you look at the sensor you can see the wire on the sensor wears threw

May 19, 2012 | 2009 Audi Q7

1 Answer

How to reset my brake warning light on a 2003 mercedes E320


If this is a brake warning light,it comes on to warn you brake pads are low
If pads have been replaced,the sensors are faulty/or fitted incorrectly
Check your owners manual to check warning light meaning

Aug 24, 2011 | Mercedes-Benz E320 Cars & Trucks

1 Answer

A warning light in my 2004 mini - light on top next to seat belt light on left - looks like a steering wheel - what does that mean


That is the brake pad warning light. When is goes off the brakes, front or rear, need to be replaced. The brake pads and the sensor have to be replaced, as once the sensor is tripped, it can't be reset.

May 15, 2011 | 2004 Mini Cooper

1 Answer

I replace the brake pads front and rear on my BMW x3 2005, but the warning light on the dash still on, how can i get this taken care


Depending on what warning is on... if it's stating brake sensor then one has come loose or cable got pinched when re-installing. If it's ABS light that needs to be reset w/reset tool.

Mar 17, 2011 | BMW X3 Series Cars & Trucks

1 Answer

I changed the brakes on my 2006 Grand Cherokee now the warning lights will not go off. How do i reset them?


If you have sensors on your brakes,the old sensors are telling your car you haven't replaced your brakes. With every time you replace your brakes you need to replace the brake sensor too. the old sensors are warn out.

May 03, 2010 | 2006 Jeep Grand Cherokee

1 Answer

I have a Mercedes car 240 c. The brake wear warning came up on the instrument cluster. I have got changed the brake pads which were worn out. How can I reset the warning signal still appearing on the...


vbmenu_register("postmenu_46704", true);



The pad wear warning shouldn't have to be reset. It will only illuminate if it actively sees the sensor circuit grounding out. If the all the pads/sensors have been replaced properly, it should automatically disappear.

Maybe it's possible there's another problem. Fluid level is ok? No air in the system? All the sensor wires are routed properly? user_offline.gif quote.gif

Feb 19, 2010 | 2002 Mercedes-Benz C-Class

2 Answers

Resetting brake warning lamp 2006 bmw 750 li


you will require to take the car to a dealer to resett this

Apr 03, 2009 | 2006 BMW 750Li

2 Answers

I replaced the front pads on a VW JETTA 2.5 and the check pads light is on. How can I reset the check pads light?


As the brake pads wear, the brake pad wear sensor contained in the brake pad contacts the brake rotor. This causes the sensor to fail. When a pad wear sensor fails it opens the ground circuit of the pad wear warning light system causing the pad wear warning light to illuminate. Perform normal brake service to correct this condition and be sure to replace the brake pads with pads containing wear sensors. Once the brake pads and wear sensors are replaced, reset the brake pad warning system by turning the ignition switch to the "on" position. As long as continuity to ground exists through all the brake pad wear sensors the system should reset and the pad warning light in the dash will go out. If the pad warning light does not go out, a check of the pad warning circuit for an open circuit condition or poor ground must be performed.

Mar 03, 2009 | 2005 Volkswagen Jetta

3 Answers

BRAKE WARNING LIGHT


I dunno if this will work on your BMW, but on my BMW Z3 and M3, it was....

Turn the ignition key to position 2, but do NOT start the car. Wait for about 45 seconds and the brake warning message will be reset.

If it doesn't reset, then the brake sensor was damage. You will need to replace the brake sensor. It sounds like you replace the brake right after you saw the warning, so the brake sensor should be okay.

Dec 19, 2008 | 2003 BMW 325

Not finding what you are looking for?
2007 Lexus LS 460 L Sedan Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...