Question about 2007 Pontiac G5 Gt Coupe
The blower motor on my pontiac g5, year 2007 is not working in either heat mode or a/c mode
Blower control module ( blower resistor) goes bad on all gm models it is located inside the car on passenger side of hvac case.
Posted on Dec 06, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Blower motor not working
Try replacing the blower motor resistor, it has different resistances for each speed. Mounted on the passenger side air duct, it is kind of a ***** to get to but you can see the harness if you invert and shove your head up into the footwell.
Posted on Jul 28, 2008
SOURCE: 2007 Pontiac G5 heat won't work
you can have two things wrong with your car 1 a/c control head is bad. 2. temp blend door actuator is bad. change actuator first. make sure you install it before you plug the connector.
Posted on Oct 28, 2009
its tricky. its behind the engine. If you pop the hood and you go to the left side, look behind the block and it chould be about half way down or so. You should see the cap for it. I think that was a horrible idea on pontiacs part. Happy motoring!
Posted on Jan 21, 2010
Do a quick sketch of the pulleys and the path of the v-belt around them. The tensioner pulley is the smooth faced one that the smooth back of the v-belt runs around. In the middle of the pulley is what looks like a nut. It is in fact a fixed spindle. If you fit on a correct socket you can push the tensioner pulley against its spring by pulling down firmly in an clockwise direction. This removes tension from the v-belt which should then be slipped off with little effort . Fit the new v-belt over the driven pulleys in the same orientation as the old one (your sketch should be your reference) remove tension on the tensioner pulley as before to get the belt over the last pulley which should be the small diameter alternator pulley,
Posted on Jul 20, 2010
Tips for a great answer:
Apr 01, 2017 | 2007 Pontiac G5
Feb 18, 2014 | 2007 Pontiac G5 Gt Coupe
Nov 23, 2013 | 2007 Pontiac G5 Gt Coupe
Jan 02, 2011 | 2006 Pontiac G5
Sep 07, 2010 | 2007 Pontiac G5 Gt Coupe
Jan 21, 2010 | 2007 Pontiac G5 Gt Coupe
275 people viewed this question
Usually answered in minutes!