Question about 1995 Toyota 4Runner

Open Question

Need torque spec for brake rotor on 95 toyota 4runner

Torque specs for the rotors on a Toyota 4 runner

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: front brake rotors 1995 toyota 4runner

If you have 6 bolts going around the center (manual lock in/lock out) hub, you are going to be there a while. The center hub needs to come off, and ALL of the internal wheel bearings need to come out. The whole locking hub must be removed in order get the rotor off. This is NOT an easy job, and you need a special tool to loosen/tightem the wheel bearings. Figure 2 hrs per side if you have all of the proper tools & skill level.

Posted on Sep 29, 2008

  • 124 Answers

SOURCE: 2006 Toyota Tacoma. What is the spec torque for

100 lbs should do it

Posted on Apr 10, 2009

  • 14036 Answers

SOURCE: need torque specs for rod bearing caps on 1995 toyota terel 4 cyl

1.6 engine 36 ft lbs 1.8 engine 36 ft lbs 2.0 engine 49 ft lbs

Posted on Apr 11, 2009

  • 701 Answers

SOURCE: torque specs for toyota tercel

Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Posted on Apr 15, 2009

  • 104 Answers

SOURCE: torque for head bolts for 1984 Toyota Corolla

head bolt toque specs are 40-47 ft-lbs

Posted on Apr 17, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need torque specs for 1995 4 runner 3v2 engine rod bearing and cylinder heads.

I have 3vz-fe and 3vz-f
It shows a 3.0L v6--95 Toyota 4-runner.
I don't see 3v2? Is this vehicle sold in the US? If not, I wouldn't have those specs, sorry.

Jul 24, 2017 | Cars & Trucks

1 Answer

Touque spec. 1995 v 6 toyota four runner

'95 3.0L V6 head= 1st- 27 ft lbs, 2nd- 33 ft lbs,
3rd- 90 degrees, 4th- 90 degrees

Jan 07, 2015 | 1995 Toyota 4Runner

1 Answer

Camshaft torque specs on a 1992 Toyota 4runner

Hi there:
The camshaft position sensor is installed on the front of the right cylinder head of the 5VZ-FE engine. The timing rotor has been integrated with the right bank camshaft timing pulley. While the camshaft rotates, the air gap between the protrusion on the timing rotor and the pick-up coil changes.

After replavcement procedure, attach the camshaft position sensor to the engine, tighten to 69 inch lbs. (8 Nm).

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 09, 2012 | 1992 Toyota 4Runner

2 Answers

2002 toyota 4runner

1.Crank position sensor or its circuitry is faulty.
replacement is reqired.
2.No fuel pump or fuse is out. New pump or new fuse required.
3.No spark. Coil(s) are out. New coil is required.
4.Distributor is broken or out of specs. New distributor cap and rotor needed.

any check engine lights? do you hear fuel pump?

Nov 25, 2011 | 2002 Toyota 4Runner

1 Answer

1990 toyota fore runner SR5 changed plugs /cap/rotor/ the truck is bgackfiring .

you messed up the ign timing If plug wires are routed correctly Adjust timing to specs.

Jun 01, 2011 | 1990 Toyota 4Runner

1 Answer

95 4 runner wont start new cap and rotor checked fule pump an filter an still nada...can anyone help me..

since cap is new and rotor/ check engine timing and fuel supply for any block passages/ check battery and lastly if it doesnt start ur engine might have a loose compression and that needs full engine overhaul.

Apr 07, 2010 | 1995 Toyota 4Runner

2 Answers

My 95 4 Runner does not have Brakes the pads are good ,no air in the lines and brake fluid is Full what could the problem Be

Your Brake Master Cylindar is Probably Bad. Do you have a Very Stiff or very Loose Pedal????

Jan 25, 2009 | 1995 Toyota 4Runner

1 Answer

Replaced rear brakes, Alarms still active

i have a 2003 toyota 4-runner my brake and abs vsc are on and it has a beeping loud noise.....what do u think is the problem?

Aug 21, 2008 | 2003 Toyota 4Runner

Not finding what you are looking for?
1995 Toyota 4Runner Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides