Question about 1995 Toyota Camry

Open Question

2011 toyota camry le whinning noise when accelerating 2.5 engine

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 73 Answers

SOURCE: 1990 toyota camry

Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.

Posted on Sep 12, 2008

  • 2 Answers

SOURCE: 1999 toyota camry

Take it to autozone and have them to pull a code on it.It sounds like O-2 sincer

Posted on Dec 07, 2008

  • 496 Answers

SOURCE: 2004 TOyota Camry LE 2.4 ENgine Code is P2238

P2238 = "O2S 1/1 positive current ckt low"

check O2 sensor for degraded performance or wiring to O2 sensor

Posted on Mar 13, 2009

  • 1 Answer

SOURCE: Maintanance light on a 2007 Toyota Camry LE

Push and hold trip button on dash with key off, turn key on but don't start, odometer will clock down, when it is finished, lite will go off

Posted on Apr 08, 2009

co7196
  • 3433 Answers

SOURCE: 1998 toyota camry le 4 cylinder How do you set the

Just make sure the timing belt is on properlyy, lining up the cam and crank in proper position to each other. The engine willstart when fully assembled because the electrical has not be altered. If it has a crank position sensor , be sure to put it back on after cleaning it and the connector.

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

1 Answer

I have a 2008 toyota camry le.My car will start but won't rev.I've replaced the throttle body, accelerator pedal but still have nothing.Please help.


before you replace anything else, scan the engine for trouble codes if you have no codes present (not likely) check for fuel pressure and exhaust flow

Nov 01, 2015 | 2008 Toyota Camry

2 Answers

Is there an Airbag Recall for a 2000 Toyota Camry LE?


The only recall items I could find for that vehicle were Headlights, and accelerator cable defects. Those are probably expired by now...14 yrs. later.

Oct 20, 2014 | 2000 Toyota Camry

1 Answer

1988 Toyota Camry LE clicking noise during acceleration


start with premium gas or injector cleaner, could be a low octane ping. this may be hard to diagnose with out hearing the noise so the other thing i would have you do is remove the belts and run the engine. sometimes when a bearing in an alternator, idler pulley, a/c compressor or belt tensioner goes bad they can make a clicking noise. try to listen if the noise is coming from the belt area, the transmission area or some other spot. spin all the pulleys with the engine off and wiggle them to see if any are bad

Mar 31, 2014 | 1988 Toyota Camry

1 Answer

I drive a 1991 toyota v6 camry le and i can find out why it doesnt have any power (slow acceleration speeds) the RPMs go up to about 5k and still cant feel the acceleration in it.


1. If you have the check engine light on then the emission control could be doing this because of bad oxygen sensor(s).

2. Check the transmission fluid. If the level is low then the transfer case would not transfer all the power from the engine to the transmission.

Mar 13, 2011 | 1990 Toyota 4Runner

2 Answers

I have a 2001 toyota camry. I hear a ticking noise


depending on what engine, you may have adjustible lifters. aIf it doesn't you may have a lifter bleeding down. you may want to try a bottle of lucas additive your next oil chang.

Sep 16, 2009 | 1998 Toyota Camry

1 Answer

I have a 2001 Camry LE that seems to have a top end knock. One guy thought that we ran the car with out oil, and something ?dried out? and got warn. We never ran the engine with out oil. So my question is...


The 4 cylinders make a noise when the t-belt slaps ithe plastic housing. The waterpump can also do this. A high exhaust leak can sound like this too. Piston slap is in there too.

Jun 27, 2009 | 1991 Toyota Camry

1 Answer

2000 Toyota Camry hesitates when accelerating


one of the spark plug coils is shorting out take to a shop whose scantool (computer) has an misfire monitor on it they will be able to find which coil it is. if you don't have a check engine light.

Mar 16, 2009 | 2000 Toyota Camry

Not finding what you are looking for?
1995 Toyota Camry Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...