Question about Cars & Trucks

Open Question

Hino truck k13c if the engine start no accelerate plusing low power

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

old marine
  • 2039 Answers

SOURCE: Engine goes to low power

I'm guessing when the engine light comes on, the computer is going into a default mode -- enough to keep the engine running, but not efficiently or with power. You need to get the error codes checked to determine what is going bad. It may be a throttle position sensor (TPS), or a crank or cam position sensor, which feed critical information to the computer.

Posted on Feb 25, 2009

  • 11 Answers

SOURCE: low engine power warning came on and the would not

undew ground on battery for 5 minutes let computer reset itself and try.its a free diagnostic.usually they do this when intake or head gaskets are gone.yours might just be a comp glitch.

Posted on Aug 08, 2009

  • 2 Answers

SOURCE: 1996 Dodge Ram won't start, compression is low

you need ti check your fuel pressure out and also do a no load test on your altenator because that might not be producing enough electrical energy to start the truck

Posted on Oct 08, 2009

  • 77499 Answers

SOURCE: Has anyone have engine specifications for a Hino '88 EH700 diesel truck engine

We do not have this information, contact the manufacturer if possible,

Posted on Sep 05, 2012

  • 90 Answers

SOURCE: hino truck k13c if i start the engine automatically shotdown,after the engine didnot start already.

Is this a diesel motor? If its a diesel bad glo plugs.

Posted on Nov 23, 2013

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2006 hino my question is this is the third time in 2 month my Hino truck lost power they say we changed the fuse this time my truck lost power and the check engine came on

unlikely as a wiring harness problem will be constant
Ask what fault codes were reported and if they do not know , that would indicate that they are guessing
find another Hino service dealer and have the codes read first

Aug 29, 2017 | Cars & Trucks

2 Answers

How will I fix my Toyota Hino SO5C engine,when I cranked the engine,it cranks but never starts?

first thing is to run the fault codes to determine where the fault could be
it may be a simple flat battery in the fob key that is not signalling the immobilizer system or air in the fuel system if diesel or the fuel shut off solenoid not working

Oct 11, 2015 | Toyota Cars & Trucks

1 Answer

Why engine hino 700 no starting

Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Jun 26, 2014 | 2006 Isuzu i-350

1 Answer

What is the hino jo5dt engine valve clearance

Jo5DT diesel engine. (no year?)

second ever too ask an not one answer ever
even google , shows, ZERO.
well , time to buy the FSM book and read it up.
or go to hino and ask.?

May 08, 2014 | Cars & Trucks

1 Answer

Hino truckk13c engine start no accelerate plusing low power

run fault codes if it is set up that way . or if pre electronic check for air leaks in the fuel system . Check that the vent on the fuel tank is not blocked creating a vacuum in the system. Check that you are getting full throttle when the accelerator is fully depressed. With the engine stopped have some one press down on the pedal and you may be able to still move the lever on the pump . If so adjust the setting till it hits the stop. The accelerator cable may be one the way out and needs replacing

Nov 24, 2013 | Cars & Trucks

1 Answer

I'm having a problem with my Hino Dutro Truck ...DPR system. i cannot fix it and the engine signal finally appears on the dashboard. some told me it will need a forced regeneration from your neare

some one told me how to fix dpr appear on the dashboard
also appear the engine check on the dashboard too for this
problem the car is very low power to speed

Sep 02, 2012 | Toyota Dyna Cars & Trucks

1 Answer

Engine starting problem.

run the fault codes
indicates an idle control sensor or other throttle / accelerator sensors

Nov 11, 2017 | 2005 Hyundai Tucson

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides