Question about Chevrolet TrailBlazer

Open Question

Change j case fuse - TrailBlazer Chevrolet Cars & Trucks

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a f350 diesel. The light does not come on on the dash for 4 wheel drive. Does not make clicking noise and will not engage. Stick on the woods. Changed 30 amp fuse. Changed relay. No luck....

Generally speaking you may need to get a shop manual to troubleshoot this.
Depending on the year and model of your truck, when you use the switch on the dash, an electric motor moves the gears in the transfer case then the light comes on. You model may also have a vac pump that locks the hubs. You would need to check the fuse under the dash plus the fuses in the engine compartment plus the 3 relays, then the transfer case.

Aug 19, 2012 | Cars & Trucks

1 Answer

Fuel pump fuse locatin 2000 elantra

There is fuse in fuse box..check that...In most cases if fuse is fine then this would indicate that fuel pump has failed and needs to be replaced. in some cases in some cars the cut off switch fails and needs to be reset or to the location on your car?? more than likely fuel pump is bad....hope this helps and good luck.....Please rate my post and thanks in advance.....if need more help fill free to contact me..

Aug 16, 2012 | 2000 Hyundai Elantra

1 Answer

I need to change my check engine light fuse, where is it located on a kia sportage 2001

There is no fuse for it more than likely the bulb is burnt in which case you will have to pull the instrument cluster out to change it. Good luck

Dec 09, 2011 | Cars & Trucks

1 Answer

Blower motor wont come on

First thing to do is check the fuse panel for a blown fuse. If thats the case just change it and you're done.

If all the fuses are good then you have a bad motor. It is usually easy to change, should be near the dash under the hood. A few bolts and a wire harness.

Jun 08, 2011 | 1991 Dodge Dynasty

1 Answer

2003 mitsubishi spyder horn dont work

In many cases, a blown fuse is the reason a horn does not work. Locate your fuse box. The specific location can be found inside your owner's manual. Inside of the fuse panel, you will find a diagram of the fuses. One of the fuses will say Horn. I recommend changing the fuse. If you do not know a lot about changing fuses, a auto parts store should be able to help you out. Hope this helps!

Apr 23, 2011 | 2003 Mitsubishi Eclipse Spyder

1 Answer

I cannot seem to get the radio fuse out of my 2004 chevy aveo. I looked at it and it is enclosed in a black casing. How do I get it out of the casing to change it.

It is not "enclosed" but it is difficult to remove. There is a mini-fuse puller on the inside of the engine compartment fuse block.

Oct 10, 2010 | 2004 Chevrolet Aveo

1 Answer

Which fuse do I have to change to fix the cig lighter in a 2009 Ford Focus?

in some cases there are 2 fuses 1 in the fuse box-should be marked,and an in line fuse behind lighter ,check both cheers roady

Feb 14, 2010 | 2009 Ford Focus

1 Answer

Stuck in 4WD low

If you have an electric shift transfer case, (little knob to change to 4x4), then the motor may have gone out. There are several fuses and relays associated with the 4x4. Check all of the fuses, replace any that are burnt out. You can not check relays, so you will have to replace them. If this does not solve the problem, then the problem could be in the 4x4 mini-computer, or the motor could be burnt out, or the transfer case could be locked up. On most ford transfer cases you can take off the bolts that hold on the electric shifter motor, and manually turn the knob that changes from 2x4-4x4. If that know will not turn with the vehicle in neutral, the transfer case may be locked up. If it is not the transfer case, look into finding a new motor for the transfer case.

Jan 26, 2010 | 1998 Ford Explorer

1 Answer

1989 Silverado 4x4 doesn't work

fheck for a blown fuse under the dash in the 4wd slot of blown replace if not make sure you have 12 volts on the fuse and at the acuator with switch on you can take the acuator outto see if it is working.Switch on, enguage T-case this is easer with two people yoou can watch the acuator open and close with the operation of the T-case if it is opeerating correctly and the drive shaft is turning then chances are the problem may likely be in the front diff

Sep 12, 2009 | 1986 Chevrolet K1500

2 Answers

Changed alternator now no horn locks int. lights wipers etc

You probably popped a main fuse somewhere. Check all fuses under hood & dash. Try removing battery cables for a minute or so, in case of resetting breaker involved, just in case.

Jan 04, 2009 | 2001 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides