Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Firing order is 1-6-5-4-3-2 cyls. # 1-3-5 on drivers side front to back and cyls. # 2-4-6 passenger side front to back.
Posted on Nov 30, 2008
there is a pin in the door handle might have broke off there are two 10 mm nuts that will release the handle but you have to take the door panels off and remove it any local junk yard should have it or can order it for you
Posted on Mar 18, 2009
please do not forget to rate and comment about your experience with fixya today.
5.0L and 7.5L engines Firing order: 1-5-4-2-6-3-7-8 Distributor rotation: Counterclockwise
Posted on Apr 17, 2009
1.6L Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise.
I hope help you with this, remember rated this post. Good luck.
Posted on Aug 25, 2009
Testimonial: "Thanks, runs like a charm, now!"
When it's hot inside your car it causes a solder joint on a little circuit board in your Main/Fuel Relay to loose contact. The MAIN RELAY is up above your gas pedal near the cruise control computer. Almost directly behind the dash vent. It will be a gray or black box with a plug of wires connected to it. Use a 10mm socket (with extensions to reach). Bring it into view and tap the Relay, "Plastic Box", while someone tries to start the car. If you can bring it down into better view you can tap it and start the car if you're flexible.
TO FIX THE PROBLEM: Don't buy a new one, just pry the cover off of it with a flat head screwdriver and look close where all the sharp pins are sticking up on the board to find the broken solder connection(s). Heat the faulty pin with a soldering iron until the solder puddles around it and your good to go. The crack in the solder will be smaller than a human hair, look close & wiggle it and you'll see the loose connection. There is usually no need to add solder, what is there is enough, it just needs melted again. Works every time on the Accord, Prelude, Civic and Integra.
Posted on Jun 06, 2010
Tips for a great answer:
Mar 31, 2015 | 1991 Honda Civic
Mar 04, 2012 | 1998 Honda Civic
Jul 23, 2010 | 1993 Honda Civic 4 Door
Jul 13, 2010 | 1993 Honda Civic 4 Door
Jun 04, 2010 | 1991 Honda Civic
May 24, 2010 | 1993 Honda Civic 4 Door
Apr 06, 2010 | 1983 Honda Civic
Dec 10, 2009 | 1994 Honda Civic
Aug 25, 2009 | 1997 Honda Civic
Sep 23, 2017 | Chevrolet Cars & Trucks
32 people viewed this question
Usually answered in minutes!