Question about 2010 Ford Fusion Hybrid

Open Question

Replacing high mount brake light - 2010 Ford Fusion Hybrid

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 492 Answers

SOURCE: Replaced back brake light bulbs

sounds like u have a ground into or not making good

Posted on Feb 01, 2011

  • 7 Answers

SOURCE: no brake lights 1998 ford explorer,high mount

another thing you have to check is the line(wiring) and if it is properly grounded..

Posted on Oct 07, 2011

Goofguyster
  • 379 Answers

SOURCE: No brake lights 2003 Ford Explorer but high mount works

maybe the one of the contacts on the bulb broke or the brake fuse

Posted on Aug 06, 2012

dustydis
  • 373 Answers

SOURCE: I was told by a local car shop that in order to fix the High Mount Brake Lamp (brake light is out) that I would need to replace the entire unit. One year ago it cost me $172.03 to replace the entire

check to see if you got two screws if you do all you need is the light bulb if you still have the old one look at it and see if the bulb can be replace without breaking anything i no you mention a year ago

Posted on Sep 25, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left Hand only SIgnal and Brake lights on a 2008 chev 3500 cutaway not working


Turn signal/ multifunction switch. Replace it. All the exterior lights run threw it except the high mount brake light. Check the brake lights. If the high mount works and the others don't . That is a sure sign.

Sep 06, 2016 | Chevrolet 3500 Cars & Trucks

1 Answer

Brake light stays on and beeping while drivig


Year make and model helps, But, look at the lights. Are the tail/brake lights on, but not the high mount brake light? Replace the turn signal switch in the column. If the high mount is on. It could( most likelyy) be the brakes switch at the brake pedal. Could also be a shorted wire to power.

Jul 08, 2016 | Cars & Trucks

1 Answer

I put new bulbs in both brake lights and high mount light . brake lights work not the high mount light.


More than likely the sockets in the high mount are burned, replace them..

May 25, 2012 | Cars & Trucks

1 Answer

Does the brake switch also operate the high mount brake light


Hi,
Get the original bulb for that 3rd brake light from the dealer parts center.
Tell them( parts dealer center ) the model of your vehicle and they will provide necessary part.

Hope that helps!

Nov 30, 2011 | Dodge Cars & Trucks

1 Answer

How do i change a brake light bulb on 2000 vw jetta?


Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Remove rear luggage compartment side panel trim (left or right).
98971821.gif
  • Remove 3 nuts, arrows, and remove housing.
  • Remove bulb holder.
Installing:
  • Install bulb holder.
  • Insert housing into body opening.
  • Tighten nuts.
  • Install applicable rear luggage compartment side panel trim.
Rear Light Bulb Holder Removing And Installing:
Removing:
  • Disconnect electrical connector.
  • Depress retainers, arrows, and remove bulb holder.
98971817.gif Installing:
  • Install in reverse order of removal.
And the Center Mounted Brake Lamp.
High mount Brake Light Removing And Installing:
The high mount brake light is installed in the rear shelf.
98971288.gif Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Disconnect electrical connector from high mount brake light.
  • Remove rear shelf
  • Un-clip high-mount brake light from rear shelf, arrows.
  • Install in reverse order of removal.
NOTE: The bulb holder base plate contains soldered- in light emitting diodes (LEDs) that are not replaceable. In the event of LED malfunction, replace complete bulb holder.
Additional

Mar 13, 2010 | 2000 Volkswagen Beetle

1 Answer

1999 GMC Envoy: replaced both GE 3057 lamps in left rear light assembly. Lamps both light. However depressing brake pedal does not initiate brake light. The righ rear brake light does work. The high mount...


The high mount brake light has its own fuse, so check that first. The high mount bulb is generally a stabdard type (there may be more than one bulb) or you can replace with an LED. As for the left rear bulbs not working when depressing brake pedal, check the bulbs again for any spring that may be broken. If the bulbs are still good, make sure there is sufficient contact with the socket. If still not working, have someone check it out further.

Feb 15, 2010 | 1999 GMC Jimmy

1 Answer

Replaceing brake lights on the trunk assembly part, how do i get to the lights?


High-Mount Brake Light NOTE: Depending upon the vehicle, the center high-mount brake light may be accessed from outside the vehicle, through the trunk, or through the passenger compartment.
  1. Remove the center high-mount bracket light lens retaining screws.
Fig. 17: Use a screwdriver to unfasten the center high-mount lens retaining screws . . .

0379160.jpg
Remove the lens in order to get to the bulbs.

Fig. 18: . . . then remove the lens for access to the bulbs

c49ad34.jpg
Carefully pull the bulb away from its retaining clip contacts.

Fig. 19: Pull the light bulb from the retaining clips

e0d87c6.jpg
Installation is the reverse of the removal procedure. Before installing the lens, make sure the brake light operates properly by having an assistant depress the brake pedal.

Jul 26, 2009 | 1999 Pontiac Bonneville

1 Answer

How do I replace the center brake light bulb on my 97 Oldsmobile 88?


High-Mount Brake Light NOTE: Depending upon the vehicle, the center high-mount brake light may be accessed from outside the vehicle, through the trunk, or through the passenger compartment.
  1. Remove the center high-mount bracket light lens retaining screws.
  2. Remove the lens in order to get to the bulbs.
  3. Carefully pull the bulb away from its retaining clip contacts.
  4. Installation is the reverse of the removal procedure. Before installing the lens, make sure the brake light operates properly by having an assistant depress the brake pedal.
I'll post the pics here in a sec.
Please don't forget to rate!!!!

May 07, 2009 | Oldsmobile 88 Cars & Trucks

1 Answer

1999 camry trunk lid & high mount brake lights all inop...


Hi,

The jiggle method is not enough you have to look at the wires. I just did and I found out that all six wires were broken close to the splice. That splice is located close to the back seat.

Hope it hepls.

Mar 19, 2009 | 1999 Toyota Camry

Not finding what you are looking for?
2010 Ford Fusion Hybrid Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...