Question about Cars & Trucks

Open Question

Western plow motor runs but won't move - Cars & Trucks

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johnjohn2
  • 5763 Answers

SOURCE: I have a 93 chevy

IM not sue if this is electric or pump running off the engine, a model # on the plow would off helped alot. this may caused by a bad ground or connection, check the plugs and see if there a broken pin, the pump may be pumping but no valves are opening or like you said maybe the pump gear sheared but i would check the pins in the plugs first as this is common, you will need to take a good look for missing pin, and check valve operation, a bad ground wire would cause this also by keeping valves fron opening.

Posted on Mar 08, 2011

  • 9 Answers

SOURCE: I have a 93 chevy

If you have a Western Plow ISARMATIC pump, a very common problem is ice forming on your pump pickup screen. This will cause intermittent up/down AND left/right functions. Western recommends the fluid be changed annually and I agree. Here's what it looks like after dirt and moisture form on the pump screen. Thats an ice chunk below the screen that appears to be a hump in the case. Be sure to verify that the pump motor is actually spinning before you suspect the pump screen. b7cfa544-07c8-441e-a344-3d5d97b0b2b0.jpg

Posted on Jan 31, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When i try to lift or angle my plow all i get is a clicking sound when i push the lift button and when i let up on the button the moter on the hydrolic unit will click but will not move the plow. minute...


Not familiar with model, but valves click at the same time motor is suppose to run. Check power and ground to motor (or try running it with jumper cables, but don't be where plow can angle and squish you. If good power but won't spin, clean brushes/commutator/check bearings in motor.

Aug 15, 2014 | Cars & Trucks

1 Answer

Fisher minute mount 2 plow won't move.the motor runs but no plow movement? Is the pump bad?


You may have to bleed air out of the system to get it to work properly. Hope this helps.

Jan 02, 2014 | Cars & Trucks

1 Answer

Western plows


Needs bleeding,got air in the line.

Dec 09, 2013 | Cars & Trucks

3 Answers

I have a 93 chevy with a western unimount. was plowing and now the motor runs,but wont lift or angle. possibly something sheared off in the pump? fluid is full,and no visible leaks.


If you have a Western Plow ISARMATIC pump, a very common problem is ice forming on your pump pickup screen. This will cause intermittent up/down AND left/right functions. Western recommends the fluid be changed annually and I agree. Here's what it looks like after dirt and moisture form on the pump screen. Thats an ice chunk below the screen that appears to be a hump in the case. Be sure to verify that the pump motor is actually spinning before you suspect the pump screen. b7cfa544-07c8-441e-a344-3d5d97b0b2b0.jpg

Mar 08, 2011 | Chevrolet 1500 Cars & Trucks

1 Answer

I have a 2003 f-250 with a curtis sno-pro 3000 hitch n run plow system. when i go to lift plow or go left or right it kills the truck. the light shut off and every thing else as soon as i hit any of the...


I think you have a problem with the plow motor grounding out. when you raise or turn plow in either direction you have to run the plow motor which is grounded out. ( as in hooking the ground and positive together directly ) the plow is on a gravity drop when you let it down by the weight itself and does not require the motor for the plow to operate. It's your plow motor or the positive feed to selonoids.

Feb 05, 2011 | 2003 Ford F250 Super Duty Crew Cab

2 Answers

Wiring for western plow joystick


My western snow plow will not go up or left or right with joystick. I can use a screw driver and make contact on the silanoid and then move the cables with the joy stick and then it will work. I have relaced selinoid and contacts. any ideas? Stomped

Oct 25, 2009 | 1990 Chevrolet Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...