Question about Cadillac Cars & Trucks

Open Question

2000 cadillac eldorado rear brake caliper removal

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 625 Answers

SOURCE: rear brakes for 1997 cadillac deville

you need to find a very little c clamp they sell this at any auto parts to block the fluid from driping then remove the bolt holding the hose and then put it back together and make sure to place the coper washrs back to prevent any leaks
the only proble is by doing that the system gets air and you need to know how to beed it out

Posted on Jun 01, 2008

  • 6 Answers

SOURCE: Rear brake rotor removal

Should just pop right off. Hit it gently with rubber mallet, it might have rusted to the hub

Posted on Dec 19, 2008

  • 1 Answer

SOURCE: rear brake caliper removal

I just did the rear caliper on my '95 Deville Concours and found that the caliper would not rotate enough to slide it off the top bolt. My solution was to remove the parking brake cable bracket bolt behind the caliper. This gave me the ability to rotate the caliper enough to get the caliper off of the brake pads and slide the caliper towards the inside of the car.

Posted on Jul 04, 2009

  • 347 Answers

SOURCE: Rear brake pad dragging

ADJUST THE BRAKE CLEARANCE ON ALL FOUR WHEELS.

Posted on Jan 01, 2010

  • 1 Answer

SOURCE: 2007 dodge grand caravan

where are the bolts to remove the caliber on the rear brakes for a 2007 dodge caravan?

Posted on May 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove calipers on a 1994 Cadillac eldorado


Remove the caliper mounting bolts

Watch the You Tube Video on any vehicle

Sep 30, 2014 | 1994 Cadillac Eldorado

1 Answer

My right rear wheel is stuck..


Without better history of how and when this happened, I would guess you used the e-brake after not using it for a long time, and the cable is rusty and now won't release. Try rocking car back and forth slightly to see if it will move at all. If not, jack it up, remove wheel, try to lube and move cable enough to remove rotor which has a drum built in for the e-brake. Probably will need to replace cable.
Also possible you have a stuck caliper or bad wheel bearing.

Apr 26, 2014 | 1992 Cadillac Eldorado

1 Answer

What do i need to remove a rear rotor off a 1993 cadillac seville


Hello Rodrigo, Thank you for the question - the rotor removal is a simple job on the Seville. I will give you the complete procedure.
Raise and support the vehicle.

Remove the rear tires, unbolt the caliper from the bracket, unbolt the bracket from the spindle and clean and grease all slide plates and slide pins using synthetic caliper grease insuring the new brake pads will slide properly in the clean slide plates, remove old rotors from hub assembly, clean machining oil from braking surfaces of new rotors and install them on the hub assembly, reinstall both brackets on spindles and tighten bolts, using a "c" clamp press the piston back inside both calipers and reinstall both calipers on both brackets and tighten bolts, reinstall tires... torque all lug nuts to 100 ft lbs and place vehicle back on pavement.

DO NOT DRIVE VEHICLE. sit in drivers seat and press the brake pedal to the floor several times until the brake pedal feels secure under your foot you are now ready to drive... happy motoring
9_23_2011_4_36_20_am.jpg

If the rotor is stuck, smack it with a dead blow, or soft faced hammer--- it will free up



9_23_2011_4_41_08_am.jpg

After it is loose, pull it straight off of the wheel studs.

Sep 23, 2011 | 1993 Cadillac Eldorado

1 Answer

My 1984 Cadillac has had new brake pads and new master cylinder and new rear calipers. Now the brake pedal rises up and my left rear caliper is locking the wheel up after 3- 7 miles


I would take it up with the guy who put the caliper in. if that was you i would get it up in the air and see what you did to cause this. take a close look at the parking brake mechanism and cable, used to see frozen cables cause this on drum brakes

Dec 27, 2010 | 1984 Cadillac Eldorado

1 Answer

Can't get rear brake bolts loose on 2000 cadillac el dorado


use only a socket or if you have space use a ring spanner.NEVER use open ended spanners on any nut/bolt.except to stop it turning.....

Jul 11, 2010 | 2000 Cadillac Eldorado

1 Answer

Need a walkthrough on replacing bad starter


Dis connect the battery. You have to remove the intake to gain access to the starter motor.Once you remove the intake the starter motor is in the vally.Be careful of the throttle body not to brake the duct from the throttle body to the intake. Hope this helps

May 06, 2009 | 2000 Cadillac Eldorado

1 Answer

How do I change my rear brakes on my 2000 Cadillac Seville STS?


you will need to remove the parking brake cable from the caliper then remove the lower slide pin bolt, flip the caliper up and pull out the old pads and install the new ones. You should get the rotors machined for the best braking performance or replace them.

Apr 17, 2009 | 1994 Cadillac DeVille

1 Answer

Rear brake rotor replacment


206-04: Rear Disc Brake 2000 Explorer/Mountaineer Workshop Manual REMOVAL AND INSTALLATION Disc Removal
  1. NOTE: When removing the rear brake disc (2C026) in this procedure it is not necessary to disconnect the hydraulic lines.
    Remove the rear disc brake caliper (2552). For additional information, refer to Caliper in this section.
  2. Disconnect the brake hose.
  3. Remove bolt.
  4. Disconnect the rear wheel brake hose (2A442).
  5. Remove the copper washers and plug the brake hose.
  1. syn~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not remove the guide pins or guide pin boots unless a problem is suspected. The guide pins are meant to be sealed for life and are not repairable. Use Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or an equivalent silicone compound meeting Ford specification ESE-M1C171-A for re-lubing the caliper slide pins. Other greases can swell the guide pin boots, resulting in contamination and accelerated corrosion or wear of the caliper slide pin mechanism.
    Remove the rear disc brake caliper (2552).
    1. Remove the brake caliper bolts (2W303).
    1. Lift the rear disc brake caliper off the rear disc brake caliper anchor plate (2C220).
  1. Inspect the rear disc brake caliper for leaks.
    • If leaks are found, disassembly is required. Refer to Caliper in this section.
  1. NOTE: If the rear brake disc binds on the rear parking brake shoe and linings, remove the adjustment hole access plug and contract the parking brake shoe and lining.
    Remove the rear brake disc.
  1. syn~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use a hub-mount brake lathe if necessary to machine the rear brake disc.
    Measure the rear brake disc, and resurface as necessary. Install a new rear brake disc if beyond specification.

Mar 28, 2009 | 2000 Ford Explorer

1 Answer

Cant get caliper to calapse


Open Bleeder screw. If talking about rear caliper, piston must be turned clockwise, with brake "Cube" to retract.

Aug 08, 2008 | 1996 Cadillac Eldorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...