Question about 2006 Hyundai Tucson

1 Answer

My 2006 Tucson has heater issues. Only hot air comes out on driver side. The air pressure seems the same but the temperature is completely different. Any ideas?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 87 Answers

Blend door actuator, door is not opening on one side

Posted on Dec 07, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: 2006 tucson...ac blowing warm air and sometimes

CHECK AIRCON GAS
CHECK POLLEN FILTERS BEHIND GLOVEBOX

Posted on Jul 17, 2009

  • 14036 Answers

SOURCE: Difficulty starting when hot.

engine flooding fuel injectors leaking while engine off.fill gas tank up and put a bottle of fuel injector cleaner in gas tank.

Posted on Nov 20, 2009

  • 64 Answers

SOURCE: hyundai tucson 2006 start overheating out of

Waterpump, seems like a likley culprit. Your Ac compressor belt runs over your water pump. when the ac is on it puts more load on your engine , your water pump may be defected and not able to handle the extra load.

Posted on Apr 17, 2010

  • 123 Answers

SOURCE: Hi, I have a 2006

Have your voltage checked. This is usually done with an alternator test at a local autoparts store. If that checks out look closely at the mounts for the headlight and make sure its not loose. Vibration can cause bulbs to blow. Make sure there is no moisture in the lens. Water will cause it to blow.. Lastly when you replace the bulb do not touch the glass. The oil from your skin will cause it to blow early.

Posted on May 20, 2011

  • 733 Answers

SOURCE: 2006 hyundai tuscon...overheats when it

Check your radiator cooling fans to make sure they're coming on when thy're suppose to. As soon as you tur on the ac, on the radiator fan should come on. If it does try wiggling the wires for the fan to make sure it's not an intermittent problem(be careful, fan may be off and start unexpectedly).

Posted on Jun 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air conditioning system, when you turn on the air conditioner the drivers side blows cold air and the passengers side blows hot air? What causes this problem?


The most common cause of this is that you have a stuck air temperature control blend door, this can be a motor actuator issue or a jammed door or both (common). To replace both parts you will need to completely remove the dash from the car to access the blend door.

Jul 02, 2016 | 2010 Ford Flex Limited

1 Answer

Heater not working


Make sure that the cooling system is filled to the top and there are no air pockets.. If low add water and see what happens. If still no heat, the valve that controls the flow of water into the heater core is not letting water in. Either it is stuck closed, or the linkage that adjusts it is not working.

Sep 05, 2015 | 2006 Hyundai Tucson

1 Answer

Hyundai tucson crdi


You might have an air lock in the fuel system. The lines from the injector pump possibly need broken loose at the injectors and cycle the fuel pump several times until nothing but pressurized fuel comes out.

Jul 26, 2014 | 2006 Hyundai Tucson

1 Answer

Hyundai Tucson a/c starts out cold air then starts to blow hot air then goes back to cold air


The issue you describe can be caused by several possible conditions. The best advice I can offer is take the vehicle into an authorized Hyundai Service Department to have it properly diagnosed.
The worse thing about chasing parts is you may or may not just get lucky on the repair. Then again you may end up shelling out $100's of bucks before you actually hit on the cause.
Possible Causes
1. Malfunctioning thermostat in the evaporator - monitors evaporator temperature so it doesn't freeze over.
2. Malfunctioning A/C control head (panel)
3. System is possibly UNDERcharged (insufficient refrigerant)
4. Malfunctioning Tripple Switch (the switch monitors pressure in the system: i.e., if pressure is too high, it will shut down the A/C; if pressure is too LOW, it will shut down the A/C) If this switch is malfunctioning, it can cause the symptom you describe.
5. Engine Coolant Temperature Sensor malfunction - if the sensor is lying, telling the engine computer that the temperature of the engine is above 230 degrees, the computer will shut down the A/C.
This is why you should have the problem properly diagnosed.
Hope this helps.

Jun 28, 2011 | 2006 Hyundai Tucson

1 Answer

2006 hyundai tuscon...overheats when it is hot outside and the air conditioner on..shut off the air and the car runs fine. replaced the water pump, thermostat(twice)..flushed radiator and replaced a...


Check your radiator cooling fans to make sure they're coming on when thy're suppose to. As soon as you tur on the ac, on the radiator fan should come on. If it does try wiggling the wires for the fan to make sure it's not an intermittent problem(be careful, fan may be off and start unexpectedly).

Jun 27, 2011 | 2006 Hyundai Tucson

1 Answer

99 Cadillac Deville NorthStar engine. In cold weather passenger side window defrost not defrosting as well as driver side. Pasenger side vents putting out less air than driver side. Driver side air...


It would be best to start by having DTC'S - diagnostic trouble codes checked ! Dealer or someother qualified shop that has a professional type scan tool , autozone or any other part store's tool will not read these codes .

DTC B1310 Ambient Air Temp Sensor Open Circuit
DTC B1311 Outside Air Temp Sensor Short Circuit
DTC B1312 High Side Temp Sensor Open Circuit
DTC B1313 High Side Temp Sensor Short Circuit
DTC B1314 Evaporator Inlet Temp Sensor Open CKT
DTC B1315 Evaporator Inlet Temp Sensor Short CKT
DTC B1316 In Car Temperature Sensor Open Circuit
DTC B1317 In Car Temperature Sensor Short Circuit
DTC B1318 Sunload Sensor Open Circuit
DTC B1319 Sunload Sensor Short Circuit
DTC B1340 Air Mix Door #1 Movement Problem
DTC B1341 Air Mix Door #2 Movement Problem
DTC B1347 Very Low A/C Refrigerant Warning
DTC B1348 Very Low A/C Refrigerant Pressure
DTC B1350 Engine Coolant Over-Temperature

Air Temperature Control Inoperative - Passenger

Circuit Description
The heater and A/C programmer receives the requested temperature offset on CKT 831 (DK BLU/WHT) from the passenger climate control. The heater and A/C programmer controls the on and off status of the passenger climate control on CKT 1336 (DK BLU).

Test Description
Checks the temperature control (full hot) of the Passenger Climate Control. Also verifies the condition of CKT 831.
Checks the temperature control (full cold) of the Passenger Temperature Control. Also verifies the condition of CKT 831.
Checks the ON/OFF switch of the Passenger Temperature Control. Also verifies the condition of CKT 1336.
Checks the ON/OFF switch of the heater and A/C programmer. Also verifies the condition of CKT 1336.
Checks terminal condition of the heater and A/C programmer.

Do you know how to do automotive electrical testing ???????


1
Turn the ignition to the ON position.
Turn the passenger climate control to full hot.
Measure the voltage at terminal D13 of the heater and A/C programmer.
Is the voltage measured equal to the specified value?
12 V
YES - Go to Step 2
NO - Go to Step 8
2
Turn the passenger temperature control to full cold.
Measure the voltage at terminal D13 of the heater and A/C programmer.
Is the voltage measured equal to the specified value?
0 V
YES - Go to Step 3
NO - Go to Step 8
3
Press and hold down the passenger temperature control.
Measure the voltage at terminal C16 of the heater and A/C programmer.
Is the voltage measured equal to the specified value?
0 V
YES - Go to Step 4
NO - Go to Step 9
4
Release the passenger temperature control.
Measure the voltage at terminal C16 of the heater and A/C programmer.
Is the voltage measured equal to the specified value?
12 V
YES - Go to Step 5
NO - Go to Step 9
5
Turn OFF the passenger temperature control.
Measure the voltage at terminal D10 of the heater and A/C programmer.
Is the voltage measured equal to the specified value?
12 V
YES -- Go to Step 6
NO - Go to Step 10
6
Turn ON the passenger temperature control.
Measure the voltage at terminal D10 of the heater and A/C programmer.
Is the voltage measured less to the specified value?
12 V
YES - Go to Step 7
NO - Go to Step 10
7
Inspect the terminal contact at the heater and A/C programmer.
If OK, replace the heater and A/C programmer. Refer to Programmer Replacement
Is the repair complete?
--
System OK
--
8
Inspect CKT 831 (DK BLU/WHT) for an open or short.
If OK, replace the passenger temperature control. Refer to Control Assembly Replacement - Passenger
Is the repair complete?
--
System OK
--
9
Inspect CKT 1336 (DK BLU) for an open or short.
If OK, replace the passenger temperature control. Refer to Control Assembly Replacement - Passenger
Is the repair complete?
--
System OK
--
10
Inspect CKT 1370 (PPL) for an open or short.
If OK, replace the passenger temperature control. Refer to Control Assembly Replacement - Passenger
Is the repair complete?
--
System OK
--

Mar 11, 2017 | 1999 Cadillac DeVille

2 Answers

Blower comes on but no heat comes out


If the blower is blowing air just fine, but you cannot control the temperature, you need to listen to air coming from the vents while turning the temperature from hot to cold. If you do n ot hear any change in airflow, then you may a temperature door in the dash broken. this is becoming a common problem on the Equinox

Mar 04, 2010 | 2000 Ford Mustang

2 Answers

My heater stoped blowing hot air.antifreeze level


If the blower is blowing air just fine, but you cannot control the temperature, you need to listen to air coming from the vents while turning the temperature from hot to cold. If you do n ot hear any change in airflow, then you may a temperature door in the dash broken. this is becoming a common problem on the Equinox and Pontiac Torrent,

Tech JK
-------

Oct 13, 2009 | 2006 Chevrolet Equinox

1 Answer

Air flow from A/C and heater remains hot on driver side


Have them check if the computer is requesting heat. if requesting a/c check blend doors, if requesting heat check control unit.

Feb 27, 2009 | 2005 Jaguar S-Type

Not finding what you are looking for?
2006 Hyundai Tucson Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...