Question about 2005 Mercury Monterey

Open Question

2004 mercury Monterrey locks won't lock electronically but will unlock

Locks will not lock with door switch but will unlock

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

blueextc3221
  • 15935 Answers

SOURCE: driver sode door lock

The locking solenoid may need to be replaced, or the rod adjusted.
You will need to remove the door panel to watch the movement.
If the solenoid is not fully extending, it will require replacement.
It will look similar to this...
7fbc21e.jpg
In the picture below, it will be #4

47cdcd4.gif Check the locking mechanism is lubricated properly. Try spraying some penetrating oil in the mechanism (just above 3 in the diagram) Wait 10 minutes, and re-try.
If the actuator does not fully extend, it will need to be replaced.

Posted on Jan 15, 2009

  • 76 Answers

SOURCE: How do I remove the door panels off a 2003 Mercury Mountaineer

undo all screws. use 2 large flatscrewdrivers to see where the plastics poprivets are.take your time and your panel will come off. to put on align panel to rivet holes use hand like hammer

Posted on Mar 13, 2009

  • 2 Answers

SOURCE: door locks 2003 grand marquis ls stopped working

check fuse

Posted on Jun 05, 2009

  • 1986 Answers

SOURCE: My one door lock button is stuck down and others simply don't wor

You may need to remove your door panels (screws are by the door handle, arm rest, under door and side of door) and then peel back the weather film on each door to see what could be causing the issues.. rusted wires, loose connection, broken linkages, seized linkages. I'm not sure what to do with your car since each door seems to be having a different issue, but I would check the locking mechanisms..

Posted on Aug 12, 2009

  • 5501 Answers

SOURCE: 2002 Mercury Villager, security system keeps going

You may have more than 1 problem. You should go to Autozone or similar and ask for a scan. The battery should be checked for shorts also. If the battery is alright you want to check the big cables on the battery. The ground wire to the engine and the starter wire to the starter under the car.

The security system can go off if the noise or vibration trips a sensor in your vehicle. A loud car, airplane, or car door slamming can do it. Check your times for a neighbors activities. The dealer or alarm company may need to desensitize the alarm. Autozone has a tester for your remote keypad.

There is also a place on the menu in some vehicles "info center" to reset the doorlocks to lock automatically when you first drive away. There could be a bug in the system.

Posted on Sep 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The abs and battery light keep coming on in my 04 mercury sable, as well as my door locks keep unlocking. What is going on?


You have three separate problems with your car at the same time. ABS is antilock brakes. You may have a bad sensor at one of the wheels. Your alternator is not putting out enough power to recharge the battery. You may have a loose wire at a connection point at the switch that controls the power door locks.

Feb 28, 2015 | 2004 Mercury Sable

1 Answer

1999 Mercury Sable Keyless entry wont work


I only have the instructions. If it won't program you may have a problem in the module. In that case see the dealer for testing and diagnosis

. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN.
Door locks will cycle to confirm programming mode. 2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to
confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle
again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Jul 03, 2012 | 1999 Mercury Sable

1 Answer

Driver Door won't unlock


Its probably froze if you live in a cold state. If that is the case you can get some lock de-icer and put that in where the key goes or if you have a remote start and the heat happens to be on then it might thaw it that way.

Jan 02, 2012 | 1997 GMC Jimmy

2 Answers

Where do I find the keyless entry code for my 1999 Mercury Mountaineer? Then when I use the remote to unlock or lock the Mountaineer, the locks will pop up or the horn will blow or all four locks will...


TRY THIS REPROGRAMMING PROCEDURE. SWITCH THE IGNITION OFF TO ON 8 TIMES WITHIN 10 SECONDS. DOORS SHOULD LOCK THEN UNLOCK. PRESS ANY BUTTON ON THE FIRST REMOTE TRANSMITTER. DOORS SHOULD LOCK THEN UNLOCK. IF YOU HAVE ANOTHER CAR REMOTE REPROGRAM IT THE SAME WAY. WHEN DONE SWITCH IGNITION SWITCH OFF.

Jan 27, 2011 | 1999 Mercury Mountaineer

1 Answer

2004 maxima rear door locks stay locked after i


MOST LIKELY ATHERES A CHILD PROOF SWITCH ON ONE ORBOTH DOORS ON THE PART THAT SHUTS

Jul 20, 2010 | 2005 Nissan Maxima

1 Answer

How do i reprogram electronic door locks


Programming Electronic Door Lock Control System NOTE: The electronic door lock control processor (14B001) erases all previous keyless entry remote transmitter (15K601) from memory when the keyless entry remote transmitters are programmed or reprogrammed. The electronic door lock control processor can store up to four keyless entry remote transmitters in memory.


  • To program (or reprogram) keyless entry remote transmitter into the electronic door lock control processor, perform the following steps:
  1. Turn ignition switch to the RUN position and momentarily short the two terminals of the program connector taped to the wire assembly and located behind the glove compartment. All doors should lock and then unlock. Remove shorting pin.
  1. Press any button on keyless entry remote transmitter. All doors should lock and then unlock to verify the keyless entry remote transmitter has been programmed. If door locks do not respond, press button again (up to three times maximum with the same keyless entry remote transmitter).
  1. Repeat the above step to program additional keyless entry remote transmitters into the electronic door lock control processor (up to four keyless entry remote transmitters maximum).
  1. Turn ignition switch OFF. All doors should lock and then unlock.
  1. Check operation.

Jun 05, 2010 | 1997 Ford Windstar

1 Answer

Have a 2004 Chevy Venture van with faulty power door locks. They will lock with the switch but will not unlock with the switch. Need schematics of the power door lock system. Thanks.


I don't have a solution, but a related problem. Our 2004 Chevy Venture power door locks are cycling (locking/unlocking) on their own while we are driving. This coincides with our remote keyless entry losing its effectiveness. I tried replacing the battery on the remote, but to no avail.

Mar 28, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

Door locks stoped working


See if there is a fuse for your door locks.

Good Luck!

Sep 15, 2009 | 2006 Chevrolet Tahoe

3 Answers

2005 chevy colorado door locks


i disconecter the battery on my 05 colorado and now my electronic switch to lock/unlock does not work and my driverside window doesnt either.... all fuses are good as well ???

Jan 18, 2009 | 2005 Chevrolet Colorado

Not finding what you are looking for?
2005 Mercury Monterey Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...