Question about 1999 Chevrolet Blazer

Open Question

1996 chevy blazer flasher won't shut off

Need wiring diagram for turn signals and flashers. Right front turn signal continues to flash.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1596 Answers

SOURCE: 1988 corsica turn signal flasher unit

Look under Driverside Dash under Steering wheet find the Plug for Scanner then go straight UP from there It Should Be Cliped to A Bracket DIRECTLY ABOVE THE DIAGNOSTIC LINK PLUG Its Ther Just Hunt for it sometimes People change them and DONT Put EM BACK

Posted on Jan 30, 2009

Ad
  • 217 Answers

SOURCE: Turn signal does not flash right or left. Where is flasher unit?

yes it is the same. the problem is most likely the turn signal switch which is located on the steering column. be sure to check all fuses, relays, and bulbs first. keep me posted thanks

Posted on Jan 31, 2009

  • 2 Answers

SOURCE: Turn signal flasher won't stop

IT's the MULIT SWITCH!! I had the same problem, replaced it (about $150) and it's all good now! Don't listen to those $ hungry mechanics.

Posted on Feb 10, 2009

  • 1 Answer

SOURCE: 91 Chevy K5 Blazer turn signal flasher

i agree with them, but you know when you open the door and thatgod damn buzzer goes off until you turn on the truck? how the hell do you shut that off?
please email me Steveracer8@hotmail.com
thanks

Posted on Dec 31, 2009

  • 1 Answer

SOURCE: cannot find the turn signal flasher

where is the signal light flasher located on a 1996 chevy lumina

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 chevy blazer . Problem is the horn does not work and turn signal flashes fast on both sides.


Do you know how to do automotive electrical testing ? Do you know what a relay is and how it works ? Turn signals flashing fast , could be aburnt bulb , flasher module .
VEHICLE RELAYS Operation Diagnosis
Turn Signal Lamps
The HAZ LP fuse in the underhood fuse block supplies battery positive voltage to the multifunction hazard switch assembly. The TURN fuse in the IP fuse block supplies Ignition positive voltage to the multifunction turn signal switch assembly. With the ignition switch in the RUN or START position, ignition positive voltage is connected through the multifunction turn signal and hazard switch assembly to the flasher module which is grounded at G205. When the turn signal switch is placed in either the left or right position, the circuit is complete from the flasher module to the turn signal lamps and to ground. The flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is activated, all turn signal lamps will flash including both IPC turn indicators. The front turn signals are grounded at G111 and G112. The rear turn signals are grounded at G475 and G422 on the pickup and G450 on the utility.

Aug 26, 2017 | Cars & Trucks

1 Answer

Cant resolve a blinker issue, Tried the easy stuff.


The signal wire going to the right front has a splice for the dash indicator, a wire branching off from the turn wire and going to the dash. It sounds like that right signal wire is broken or lost a connection before it splices off to the dash, so the problem sounds like it is under the dash, either coming out of the turn signal switch to the flasher or from the flasher to that splice. You may need a multi-meter to check voltages on that wire at various places under the dash. Ascertain which color wire you need to concentrate on. Check for voltage on it with key on and right blinker on-voltmeter will spike to battery voltage, then fall to zero as the flasher breaks voltage continuously, if checked after the flasher. If checked when leaving the turn switch, it should be a continuous signal on that wire. Think you better find a wiring diagram to find the right wire to check. Good luck.

Apr 27, 2013 | 1998 Buick Century

1 Answer

Need to replace left turn signal flasher


This is weird! It seems to me that the left turn signal is getting 12v from somewhere at all times.I don't think the flasher is the problem(most GM systems use a single flasher for left and right)You probably have a crossed wire somewhere(or an add on accessory was connected to the left signal wire,allowing 12 volts to bleed through to the circuit)

Dec 31, 2011 | Pontiac Bonneville Cars & Trucks

1 Answer

T urn signal flasher does not flash on my 1996 chevy blazer


do u mean ur turn signals do not flash an does the green turn signal arrow on ur insterment panel light upwhen u go to turn them on...if they dont flash an the arrow lites replace the turn signal flasher ..it is a round sliver cylinder located in the fuse box or under the dash on the steering column

Jul 14, 2011 | 1996 Chevrolet Blazer

2 Answers

Turn signal does not flash but four way flasher works fine bulbs are fine


Someone at chevy needs to be slapped over this one. The turn signal flasher switch probably went bad. But this vehicle is different from other vehicles, and from common sense. The hazard and turn signal flasher are not in the fuse box, they are in the middle of the dashboard, just under the radio. You have to take out the screws on the lower dashboard panel, bend it back and finagle the flasher switches out. They are round and plug straight in. The turn signal one is on the driver side. I had the same problem and lost a lot of hair figuring out where they were. Good luck.

Apr 14, 2010 | 1996 Chevrolet Blazer

1 Answer

1996 CHEVY BLAZER HAZZARD LIGHT WORK BUT TURN SIGNALS WONT.


Locate signal flasher & swap with hazard & see if the opposite occurs, if it does, replace flasher.

May 12, 2009 | 1996 Chevrolet Blazer

2 Answers

Cannot find the turn signal flasher


where is the signal light flasher located on a 1996 chevy lumina

Apr 24, 2009 | Chevrolet Lumina Cars & Trucks

1 Answer

Turn signal does not flash right or left. Where is flasher unit?


yes it is the same. the problem is most likely the turn signal switch which is located on the steering column. be sure to check all fuses, relays, and bulbs first. keep me posted thanks

Jan 31, 2009 | 1996 Chevrolet S-10 Pickup

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...