Question about Toyota Sienna
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I get many calls a week for this procedure...
This is really easy! Follow these directions:
Turn the key ON
Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.
Turn the key OFF.
Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.
Turn the key ON, do not start the engine
Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.
Release the black trip meter reset stick.
This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.
Hope this helps!
Posted on Feb 06, 2009
I had to replace my passenger side mirror on my 2004 Sienna a while back. I took some pictures as I did it. Maybe this can help.http://time4nothing.blogspot.com/2008/03/fixing-04-sienna-passenger-side-mirror.html
Posted on Oct 04, 2009
The drain plug is on the bottom of the transmission. Its torqued to 49 nM.
1. Remove tranny oil pan drain plug
2. Drain old fluid (roughly 2-4 quarts)
3. Reinstall drain plug.
4. Measure amount drained in a 99 cent orange juice pitcher from Walmart
5. Pour back the same amount drained using Toyota Type T-IV fluid (available in 1 quart bottles from a Toyota dealer.
6. Start engine and shift slowly through all the gears ending in Park.
7. Check fluid level on the dipstick. Add fluid, if necessary, to bring the level to a point inbetween the COLD and HOT marks on the dipstick.
8. Go for a 20 minute drive and recheck fluid level. Add fluid, if necessary, to bring the level up to,
but not beyond, the upper half of the HOT range on the dipstick.
As in 1973, NO FLUSHING is needed and NO FILTER REPLACEMENT is needed, NO PAN REMOVAL is needed. As, as in 1973 todays Toyotas have a metal mesh filter screen that doesn't ever get clogged except in rare cases of transmission operational abuse, including failure to ever change the fluid for 150,000 miles or more.
Posted on Nov 21, 2009
the sliding door is probablly draining the battery,, have door checked.. make sure tracks are clean and hinges are not binding
Posted on Dec 12, 2009
Tips for a great answer:
Jul 08, 2014 | 2006 Toyota Sienna
Mar 26, 2013 | 2006 Toyota Sienna
Mar 19, 2013 | 2006 Toyota Sienna
Mar 02, 2013 | 2006 Toyota Sienna
Jan 15, 2013 | 2006 Toyota Sienna
Dec 14, 2010 | 2006 Toyota Sienna
Feb 16, 2010 | 2006 Toyota Sienna
Nov 15, 2009 | 2006 Toyota Sienna
Jul 27, 2009 | 2006 Toyota Sienna
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: