Question about Cars & Trucks

1 Answer

Need to know the cam@PINION timing marks for 52 pan

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 41,824 Answers

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1450 Answers

SOURCE: timing marks

this is for 1.9

Posted on Aug 21, 2008

  • 11 Answers

SOURCE: timing marks for cam on 92 camry

on the intake cam use the middle mark in between the big one and the other small one on the exhaust cam use the use the smallest mark farthest away from the 2 small marks on the same tooth. line those 2 marks up on the same tooth in the middle.

Posted on Feb 11, 2009

  • 101 Answers

SOURCE: need diagram of cam marks and crankshasft marks for timing belt set up

they are on the t/belt cover.

Posted on Aug 05, 2009

  • 1 Answer


the timing is set to 8 degrees at 700 rpm...if it helps any

Posted on Aug 07, 2009

  • 563 Answers

SOURCE: hi need to know what timing marks to use when replacing cams

The timing marks to use are spot-drilled on the faces of the timing gears.
The timing marks on the camshaft gears must align side-by-side, and as closest as possible on the Toyota,Camry 2.2 engine.

Posted on Dec 21, 2009

Testimonial: "thanks for the tip of the three marks ,with out it would have messed up"

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Timing marks 1993

spark or cam ?????????????????
and which engine, some cars have up to 10 choices.
most are about 3 or 4.
not of this can i guess.

May 29, 2014 | 1993 Pontiac Grand Prix

1 Answer

I want to know how and were to line up marks on the twin cams on a 2.o engine

local autozone can print you out a diagram showing how to do it at no cost,,, in some cases if there are no timing marks on the cams you will have to remove valve pan cove to preform timing of cams.....hope this helps and if so Please rate my post and good luck and if more help is needed fill free to contact me.

Aug 16, 2012 | Nissan NX Cars & Trucks

1 Answer

I KNOW IT IS 123456 BUT I wanted to know where they go do they fire ? 12/34/56/? or do they fire 14/36/52??

The #1 cylinder is on the passenger side front, those are cylinders 1,3,5 the other side are 2,4,6 counting from the front.
#1 coil also fires #4, #3 coil fires #6 and #5 also fires #2.
The cam gears on the middle of the cams are two piece spring loaded gears, there is a hole for a bolt to go in after the two pieces are lined up until the cams are installed then the bolts are removed, if you have any kind of manual it should mention this. The two dats are called assembly marks and are not the timing marks, the timing marls are the single dots, they use the assembly marks so that when the cams are in you can remove the 10mm bolt from the gears. let me know if you need some illustrations for those marks and I'll see if I can upload something for you but it may be tomorrow.

Jun 09, 2017 | 1996 Toyota T100

2 Answers

How to change a timing chain on a 351 ford

You'll need to remove radiator, shrould, belts, distributor (make sure you mark the position of the distributor and rotor after you line up the crankshaft pulley with the TDC mark on the timing cover), water pump, the harmonic balancer, (you'll a harmonic balancer puller). fuel pump, if mounted on the timing cover. Remove the first 3 or 4 of the oil pan bolts, remove the timing cover. It may help to place a screwdriver in between the the oil pan and engine, to lower the pan slightly to get the cover off. Remove the timing chain and gears, and reinstall, Replace the from seal. Make sure to use some silicone sealer at the block/pan/cover mating surface.

Jun 07, 2010 | 1986 Ford F 250

1 Answer

Where are the timing marks for cams and crank

The crank pulley has a v notch cut in it that should be pointing at 5 o clock position there is a timing mark on the oil pan.The camshafts have no timing mark, they have notches cut out in the back of the cam.Snap on tools sells a tool that locks the cam in place its a flat piece of steel.

Feb 07, 2010 | 2003 Ford Escort

2 Answers

Hi need to know what timing marks to use when replacing cams

The timing marks to use are spot-drilled on the faces of the timing gears.
The timing marks on the camshaft gears must align side-by-side, and as closest as possible on the Toyota,Camry 2.2 engine.

Dec 20, 2009 | 1995 Toyota Camry

1 Answer

I want to change a head gasket for 2002 Chevrolet Trailblazer but i dont know how

Ok get ready for a real headache. To change that head gasket you will have to have a lift, some special tools and about 20 hours( for a trained mechanic). It involves removing the rack and pinion steering, oil pan, all of the parts off of the front of the engine, and timing cover. Then the fun begins. That engine has no timing marks on the outside of the engine. You will have to pull the exaust, and intake manifolds, valve cover and coils. Roll the motor by hand till you get all the timing marks lined up han then you can remove the head. If you are not a trained mechanic, you are really getting a tough one to start on. You will need a manuel on all the specs, Good Luck

May 13, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Instaling a timing belt on 2002 daewoo lanos

I have a 2001 Lanos and I've replaced my belt twice (after breaking the first one at speed and having to replace the engine). The two cam gears have timing marks that should point towards each other. If you hold a ruler up with the edge of it passing through the center of the cam shaft bolts, the timing marks on each cam should be lined up on with the edge of the ruler and pointing towards each other. The crankshaft gear (not the big pulley) has a small triangle timing mark on it that should point almost straight down. There is a V cut into the oil pan that actually should line up with the cranshaft timing mark. BE VERY CAREFUL because if you rotate the crankshaft independently of the cams, you can tear up the valves very quickly.

Dec 05, 2008 | 2002 Daewoo Lanos

1 Answer


If you have the 2.0 L engine, then the two cam marks should point upward to match the notches in the valve cover. The crankshaft notch should point downwards to match the V notch in the lip of the oil pan. Hope this helps...

Nov 16, 2008 | 2002 Daewoo Lanos

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides