1998 Toyota Avalon Logo
Ron Tanner Posted on Nov 24, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Replace Cup Holder and Air Vent

1998 Toyota Avalon XL. Runs GREAT. I bought the replacement parts for the dual cup holder and passenger vent/register. How do you replace? I don't want to damage anything. It is my wife's car(smile). Thanks.

1 Answer

mike kirschbaum

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Master 1,198 Answers
  • Posted on Nov 24, 2013
mike kirschbaum
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Mar 27, 2008
Answers
1198
Questions
2
Helped
359281
Points
3184

A Chilton or equivalent shop manual should tell you. In general, consider that these items are installed in a flash at the factory by non-skilled workers, so it probably goes in real simply and quickly. Look for little catches, tabs, slots, etc., that line it up, and snap it in.

  • Ron Tanner Nov 25, 2013

    Good option on Chilton/shop books. Thanks!

×

2 Related Answers

Anonymous

  • 6982 Answers
  • Posted on Jul 07, 2009

SOURCE: cup holders for 1997 toyota 4runner

Try a local scrap yard...much cheaper there.

Ad

Anonymous

  • 1 Answer
  • Posted on Aug 13, 2009

SOURCE: replacing cup holder unit on a 1997 toyota 4runner

Despite the other persons advice. on this part you cannot simply yank it out. You must remove the center console (where the stereo is). This is done by removing screws from behind the thin piece of plastic that has your temp controls etc. there may be other screws, but they are easy to find. pull the whole unit forward and then you will have access to the back of the cup holder. there are two "clips" that you can get to. depress them both and the old cup holder will come out. installing the new one may invovled a good shove from the front to engage the new clips. good luck!

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

How do I remove an in-dash cup holder in my 2005 Chevy Malibu

open the cup holder and under side of holder is a tag that needs to be pushed down whilst pulling gently on the cup holder , if the tag is not under neath it will be towards the dash end of the cup hole , depends on the part supplied at time of manufacture
0helpful
1answer

Replacing cup holder

I assume you mean the one that flips up in the center console?

If so, there are three likely issues.

1) did you slide out the retainer from the upper screw? the top screw had a cover that had to be pried off. you then took the screw out. Lastly you have to slide out the plastic retainer that the screw went into. It slides out towards the opening.

2) you have to have the cup holder partially open to remove it. the hinged part that folds up is stored in the cavity under the console when closed. you have to open the cup holder and keep pushing until the front of the cup holder lip comes up. Work the cup holder up and down until it comes out.

3) the cup holder is stuck in place due to years of spilled liquid. If you've done the above, then you can either spray soapy water on the creases around the opening and let it set, or you can apply strategic brute force.
Be aware through. if this is the center console cup holder just behind the gear shifter. There are two screws and nothing else to hold it in. Just be carefull....
1helpful
1answer

Want to remove console to replace cup holder on 05 crossfire.how do you remove hand brake handle?

right above the cup holder is a cover the length of the cup holder remove it pops out.
2 screws hold the cup holder 2 hold the bezel u only need to take the 2 for the bezel out. The rest will pop off and disconnect the connectors for the AC and so on.
2helpful
1answer

Rear cup holder broken, how do I replace it?

normally cup holders are bolted or fastened by a screw to its base, remove the screw and lift up the broken cup holder and install a new one...
4helpful
2answers

Replacing cup holder unit on a 1997 toyota 4runner

Despite the other persons advice. on this part you cannot simply yank it out. You must remove the center console (where the stereo is). This is done by removing screws from behind the thin piece of plastic that has your temp controls etc. there may be other screws, but they are easy to find. pull the whole unit forward and then you will have access to the back of the cup holder. there are two "clips" that you can get to. depress them both and the old cup holder will come out. installing the new one may invovled a good shove from the front to engage the new clips. good luck!
1helpful
2answers

Broken cup holder in 2000 BMW 740iL

unfortuantly the whol center councle needs taken apart it is harder than it looks sorry for the bad news, an easy fix is to just replace the front part of the cup holder
Mar 24, 2009 • 2000 BMW Z8
5helpful
2answers

2003 escalade rear climate control no heat just cold air.

there are two separate actuators for the rear system. one controls temperature and the other controls vents from head to feet. mine problem was the later. that acutuator for esv 2003 is 89018365. it is located just below third seat cup holder passenger side and can be replaced simply by removing cup holder. triangular shaped part with wire harness.
4helpful
1answer

Cup holder is stuck down

stick your hands in the cup holder, press against the sidewalls of the cup holder and pull up, there are only 2 metal clips that hold the cup holder assembly in place, it will pop right out, once out check for things obstructing the cup holder lid or broken tracks, a new one is 90-115 bucks or about 20 at a junkyard, just went through this myself
Not finding what you are looking for?

283 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...