Question about 1999 Chevrolet Malibu

Open Question

Set clock 1999 malibu - 1999 Chevrolet Malibu

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do set the clock on my 1998 chevy Malibu radio?

If the radio has a set button: Turn key on and radio off. Press the set button and use the right seek button to set the minute and left seek to set the hours. If it has no set button: find the hour and minutes buttons or holes under the auto tone knob. Turn key on engine off and radio off. press the left button for the hour and right button for minute.

Sep 18, 2014 | 1998 Chevrolet Malibu

1 Answer

Need to know how to set timing on a 1999 chevy malibu

That is set by the PCM and not user adjustable.

Oct 04, 2011 | 1999 Chevrolet Malibu

3 Answers

1999 chevrolet LS malibu V6, ABS light comes on

yes it is safe -your brakes will work normally only difference u will see is if u hit[stomp] on the brake hard will cause wheels to lock up[skid] check the sensors wiring ,connections and connection to clips the sensor is incorporated into the wheel hub but the wiring and clips connections are exposed which can get damaged or hit by road debris -if u remove the wheel will see wire running into back of rotor --to replace will have to replace the whole hub[wheel bearing] average price about $80 for part if diy

Jun 01, 2010 | 1999 Chevrolet Malibu

1 Answer

I have a 1999 Chevy Malibu my car just shut down. I called AAA and they said the battery connectors on the car was lose my car started however my care stereo does not work and no clock setting is...

you may need to enter a security code to get the radio to operate, but there should be a display saying code or antitheft on the radio screen, if theres not then i would start by checking all the fuses even the fuse box under the hood,

May 12, 2010 | 1999 Chevrolet Malibu

1 Answer

I have a 1999 malibu. my boyfriend was working on it when the factory cd player locked. what is the code for it?

haha well you set the code he made it think he was stealing it so you have to know the code or the previous owner set the code then your screwed and have to get a new radio

Apr 01, 2010 | 1999 Chevrolet Malibu

1 Answer

What is the drive cycle or vehicle break in for 1999 Malibu

the monitors should have set by now. usually its around 50 miles. and a couple cold starts. i would have the computer scanned if the monitors have not set and youve driven quite abit more than this. we change batteries all the time and usually have all the monitors set in a couple hours.

Jan 06, 2010 | 1999 Chevrolet Malibu

1 Answer

Changing battery in 1999 chevy malibu

security will no be affected but if you don what to do things like re-set the clock or the car has a stereo with a code and you dont have the code anymore its better if you use a sigarret plug with a 9 volt battery they're sold at any automovile store specifically to maintain settings. hope this helps

Dec 24, 2009 | 1999 Chevrolet Malibu

1 Answer

I cant figure out how to set the time

Setting the clock on a 2002 Chevy Malibu
  1. First, locate the H and M buttons located just below the tuner knob (the lower of the two).
  2. You press AND hold either one of those buttons for a few seconds until it beeps, or the numbers are flashing.
  3. You can then use the H button to set the HOUR and M button to set the MINUTES.
  4. To finalize your time selection, just wait 10 seconds or so and the flashing should cease and your clock is SET!
  5. If it does not set after waiting, just press the POWER button to activate the radio and it will finalize the clock settings.

Sep 27, 2009 | 2002 Chevrolet Malibu

1 Answer

The clock light is not turning on

This may be as simple as a blown bulb behind the clock. The hard part is finding how to get to it.
Usually trim unclips to give easier access.

Hepe this cures the problem

Thank you for using

Jan 24, 2009 | 1999 Chevrolet Malibu

1 Answer


bring the piston no 1 on the top position check the cam shaft si moving freelyon the outer side of the shaft there are 2 gear with 14mm bolts and 1 extra whole, put a long bolt in the empty space and try to turnthe engine the bolt will go further in the space than the timming is set put the chain on that should do

Dec 08, 2008 | 1999 Chevrolet Malibu

Not finding what you are looking for?
1999 Chevrolet Malibu Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides