Question about 1996 Honda Accord

Open Question

How to bleed a ldv maxus slave cylinder - 1996 Honda Accord

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

autodr
  • 260 Answers

SOURCE: Bleeding clutch slave cylinder

i think youre doing the right thing. they are very stubborn to bleed because the hyd. line goes up high across back of engine before droppiing back down to slave cyl., trapping air. could try to gravity bleed by opening bleeder at slave, cap off of master cyl, full with fluid then it may start to come out after a bit. then try your process again. or can try to bleed at connections further up the line, working your way back to bleeder. hope this helps. be patient.

Posted on Nov 15, 2008

Keith100881
  • 74 Answers

SOURCE: put in new clutch and slave cylinder. no clutch pedal. how do you bleed the cylinder?

work it back and forth with your hand and you will get pedal after a while then bleed like you would brakes get help so one can pump and the other can bleed

Posted on May 24, 2009

  • 2187 Answers

SOURCE: Bleeding Clutch Cylinder with no bleeder screw

I have not tried myself but see if the link below will work for your case. It is not the same model as you have but most vehicles have the same components for the non electronic parts. http://www.2carpros.com/forum/1988-dodge-dakota--bleding-air-out-of-clutch-master-cylinder-vt248517.html

Posted on Jun 04, 2009

  • 2309 Answers

SOURCE: 1992 Honda Prelude: I replaxed the external clutch

the clutch will not compress till the system is bled, try gravity bleeding then pressure bleeding

Posted on Nov 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help needed have a Ldv Maxus, put a new plastic grommet into clutch pedal today as the old one broke, now having trouble getting it into gear unless I pump the pedal Any Idears please.


Sounds like there is now air in the system. If there is a bleed nipple on the slave cylinder, bleed the clutch with new fluid. If not, it is a sealed system and both the master and slave must be replaced as a pair and ensure you follow the instructions otherwise you will get air in the system again.

Jun 01, 2017 | Cars & Trucks

1 Answer

How to replace slave cylinder on rear brakes of 1400 Nissan LDV


the slave cylinder is next to the master wheel cylinders are back there 2 / 10mm bolts hold them on

Sep 11, 2014 | Nissan 1400 Cars & Trucks

1 Answer

How to fix 5th gear on my ldv maxus


Its likely you have a problem with the clutchnot completly disengageing or problems with disk or pressure plate

Jun 13, 2013 | 1997 Chevrolet Cargo Van

1 Answer

Clutch master cylinder gone do i also have to change slave cylinder due to bleeding problems 1999 Grand voyager


No need to change the slave cylinder, but bleed both and if you have low or no brakes then bleed the brakes too.

Jan 08, 2013 | Cars & Trucks

2 Answers

Help!!! how to reset a LDV Maxus key fob?


Hi
I know from experience that you cannot really re synch these fobs on the LDV Maxus vans.
What actually is the fault is an onboard component on the pcb has failed and we normally just replace that with a new one..the fob will be tested for operation and sent back. OR its the Relay in the ESA unit - under the left hand front glovebox on the bulkhead - black with cables going into it. We have those relays (soldered to the pcb) we can supply those or do the work for you. The fob connects to that ESA and the unit then fires the relays to open/close the doors. Sometimes that unit is installed upside down which causes water (condensation) to enter the box and have fun with your electrics.
The fob is SYNCHED to this unit via coding we can use your old fob to clone to a new fob and that will work with the ESA and the vehicle.
We have the parts on this link Items for sale from remobilise ltd

Here is a link to how to program the fob to the vehicle via the programmer - NOTE how you MUST have a working fob to program another (text at the start of the video... LDV Maxus flv

We can fix most problems on the LDV Maxus that occur with faults to do with the Central locking/fobs/ESA/ETACS - three relays are in the ESA and they control ONLY the central locking - two more relays are in the ETACS unit (behind the ashtray) and they control the fogs and intermittant wipers.

Any help or info needed please contact info@remobilise.co.uk
or tel 01792 896404.

We are based in Swansea UK.

Aug 30, 2012 | Cars & Trucks

1 Answer

What's your problem?how to bleed a slave cylinder


Most parts stores have a pressurizer for the brake fluid. You need one. Set up the pressurizer according to the directions and pressurize the system. Open the bleed valve closest to the slave cylinder. Allow enough fluid to escape but do not run the master cylinder dry, otherwise you will have to bleed the entire system. Google "DIY + how to bleed a slave cylinder and the correct answer should be there.

Dec 01, 2011 | 1993 Mazda Navajo

1 Answer

How to bleed the clutch on a saturn 97


one way to bleed it is by pulling the piston like slave cylinder with the rod out of the transmission and by pushing the rod into the slave cylinder several times, make sure you have plenty of dot3 brake fluid in the clutch master slave before you do this. by pushing the rod into the slave cylinder it acts like doing a brake job it bleeds the air out into the clutch master slave cylinder and sucks in the break fluid getting rid of all air in the system. thats the only way to bleed those systems seeing as they are sealed systems

Aug 22, 2010 | 1997 Saturn SL

1 Answer

Changed clutch but unable to bleed the slave cylinder. Does that mean clutch master cylinder is bad? Got one from parts store but can't figure out how to take the clutch safty switch off to change it. Any...


Probably not. Bleeding clutch slave cylinders is tricky because you cant "pump it up". The master cylinder has no static valve so the best way to bleed the slave cyl. is to use gravity. Fill the master cylinder reservoir and open the bleed valve on the slave cyl. Allow fluid to drip into an open can until there's no trace of air. Close bleed valve and try clutch. If still no pedal, repeat the process. This is quite an acceptable procedure.

Mar 22, 2010 | 1991 Chevrolet S-10

5 Answers

Stuck clutch pedal on a Mazda B series truck


Replace both clutch slave and master cylinders, and bleed well. I've also had this happen.

Jul 11, 2009 | 1988 Mazda B2200

1 Answer

The clutch on my car stuck to the floor. I check the reservoir was completely empty. I have a feeling the slave cylinder is filled with air. I'll need to get the schematics to see how to bleed the clutch.


Bleeding the clutch is similar to bleeding brakes. You'd pump the clutch pedal several times to get the pressure up, and then open the bleeder on the slave cylinder (mounted down on the transmission). Repeat and add fluid as needed until no air comes out.

Two things - first off, some cars have more than one bleed point (the Nissan 300ZX is one of those), so be sure there is only the slave cylinder to bleed. Second, if it went right to the floor, something failed - either the slave cylinder or the master cylinder. Changing the slave is relatively easy - usually two bolts and it comes off, you put on a new one, and bleed it as described above. Often the slave cylinder is less than $30, so it's worth it to try changing it if you can't get the pedal to come back off the floor on its own. A clutch master is significantly more expensive and more difficult to change, so start cheap and easy and replace the slave cylinder if you can't pump the pedal to get pressure built up for a bleed.

Jul 23, 2008 | Chevrolet Cavalier Cars & Trucks

Not finding what you are looking for?
1996 Honda Accord Logo

Related Topics:

877 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...