Question about 2008 Ford Fusion

1 Answer

Clunk clunking in the front end,

Feels and sounds like you ran over a big can and it got wrap around your axle

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 170 Answers

Have you checked for a big can wrapped around your front axel? Seriously, This could be anything from brakes, to axel, to suspension. Could be simple or major you need to have it looked at... Good luck

Posted on Nov 23, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 64 Answers

SOURCE: Clunking and grinding noise

My 2003 F150 Supercrew would not engage in 4x4, it ended up being the shifting fork in the front end, cost me $200.

Posted on Jul 16, 2008

  • 33 Answers

SOURCE: 2001 Tarus clunking sound

very common problem is the sway bay end links that attach to the strut from the sway bar. They sound like a light chuckling knock over bumps. The bushings that hold the subframe up wear or the bolts loosed due to the bushings wearing. usually the rear ones The bushings are 2 piece ,upper and lower Tighten with 18mm socket

Posted on Feb 18, 2009

  • 29 Answers

SOURCE: 2000 Explorer Clunks, sounds "loose" suspension

it sounds like the radis arm bushing are wore out they are the arms that go between the frt. axle to the frame they have round bushings that are bolted the the frame rails just behind the frt tires.

Posted on Mar 06, 2009

  • 26 Answers

SOURCE: clunking noise going over bumps front end

Its the bushings

Posted on Sep 30, 2009

  • 14585 Answers

SOURCE: resolving a clunking in front end of a ford tarus

Lower control arm bushings and lower ball joints can cause a noise like this. But I have fixed a few that sounded like the front end was falling offf. It turned out to be the air conditioning plenum under the dash. There is a tube that comes loose some how. this tube stretches all the way across the dash. you can see part of it under the drivers side, it disappears in the center. I take a piece of thick foam and wedge it under the tube towards the center column. Most times this gets rid of the noise or most of it. No one wanted to pay to take apart the dash to fix the passenger side.

Posted on Jul 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clunking in front end


These trucks had a problem with tje ac commpressor clutch breaking i would recomend sliding under truck and looking closely at the ac clutch. also the idler pulleys tensioner and waterpump pulley as these are also problematic

Oct 29, 2013 | Ford Cars & Trucks

1 Answer

Clunking noise when turning steering wheel going slow around corner


A lot of these Chrysler Town and Country vans had issues with the front stabilizer bar end links, usually you wont feel them move if you try to move them by hand, but they will make an awful noise clunk noise when turning or going over bumps slowly, i would suggest replacing the end links and that should take car of your clunking issue. Also the front lower control arm bushings separate as well and can cause this noise as well.... but i would replace the end links as a first step and go from there.... Hope this helps..

Sep 27, 2012 | 2003 Chrysler Town & Country

1 Answer

2003 Chevy Malibu LS. The problem is an intermittent clunking noise that happens during turns, especially when going in reverse and at slow speeds. There is a single clunk during the turn, and another...


Most likely you have a bad drive axle, each drive axle has 2 universal joints and when they get worn they make a big clunk sound. Especially turning or going from forward to reverse.


Please take a moment and rate my answer.............Thanks

Dec 01, 2010 | Chevrolet Malibu Cars & Trucks

2 Answers

2000 s10 clunking sound from rear end


Sounds to me like a wheel bearing is going out, get the wheel checked out by a mechanic, and see if that is the problem, but it sounds to me like a bearing issue.

Aug 12, 2009 | 1996 Chevrolet S-10 Pickup

2 Answers

My 1992 Honda Accord EX-R makes a clunking/rattling sound...


It's probably your cv (constant velocity) joint. Jack up the honda and put it on safety stands, look at the area behind the center of both front wheels, there is a rubber boot. This boot protects the cv joint from dirt, road grime, water, salt, etc. If you see splits in it or grease on the boot, it has deteriorated, and is letting contaniments in. The damage has already been done if it makes a rattling noise going around corners at slow speed. I changed both cv joints (purchased rebuilt axles for $49 each) in my 92, but it is a big job labor wise. There's a lot to take apart to remove the axles.

Jul 29, 2009 | 1992 Honda Accord

1 Answer

4 WD clunking and clicking sound when turning left or right


Sounds like the front drive axles are worn.My 89 MPV had the same "clicling" noise with an occasional clunk.The reason you feel it more in 4wd mode is because power is now being transfered thru the worn axles. I replaced both sides for approx $375(Axles rebuilt were 130 for drivers side and 110 for passenger side the rest was labor)

Jan 13, 2009 | 1994 Mazda MPV

5 Answers

Rear end clunk in Chevrolet Silverado 1500 pickup


The noise is caused by the axle button being worn out, this lets the axle move back and forth and clunk, this is a unique problem with C clip retained axles, it is a noise issue but will not fail and cause any more damage, in order to fix it you must have the axles pulled and the diff carrier checked for excess wear where the axle retainning C clip rides, if the carrier is ok then replace the axles.

Nov 24, 2008 | 2000 Chevrolet Silverado 1500

1 Answer

4 wheel drive stopped working


the light is on.........let's see, where you having problems with clunking noises in the front, now or before when or not in 4 wheel drive? If so sounds like cv/axle shats/joints. Last time you used 4 wheel, was there a big clunk, just once? Is there an ocasional clunk when going over bumps? If so, sounds like Ujoint. I don't belive chevys use vaccum for 4 wheel drives systems at all.

Sep 14, 2008 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...