Question about Cars & Trucks

Open Question

How to reset service light on a np300 - Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi my Nissan np300 got no tail lights dash lights and parking lights.Cheched fuses install new bulbs in the tail lights cheched wiring for brackage all seems good.

Did you change the radio out? Often people change the radio, cut the oem harness and fail to cover the dimmer lead which then can short to ground and kill the entire parking light circuit (which runs the listed lights)

Nov 04, 2016 | Nissan Cars & Trucks

1 Answer

Oil capacity of a 2.5 tdi nissan np300

During regular service of NP300 takes 4.3 liters of engine oil. Nissan NP300 really needs high quality motor oil. Lots of Nissan vehicles produced in 2009 had 2.5 motor under the hood. Having model code YD25DDTi this engine should be filled up with Synthetic 5w30 type of oil. Choosing normal Synthetic 5w30 oil for NP300 2.5 engine you ensure its long lasting work.

This is the same info for your 08 model. Please make sure to use 5w~30 full synthetic. Mobil 1 or Castrol.

Sep 09, 2016 | Nissan Cars & Trucks

1 Answer

Please help my NP300 nissan is showing a car and a key, what could be the problem the car doesn't even start

not 100% on you model but sounds like theft lock. my need dealer to reset .do you have a "chipped" key try another key if u have one.

Mar 06, 2015 | Nissan Cars & Trucks

1 Answer

My car is Nissan np300 2011 and is showing the code p1622 inj adj val unregistered this was after fitting new injectors what can that be

Sometimes (depending on the vehicle) the light will not go out by itself (after fixing the problem). If so, _must_ be reset (''cleared'') by a code reader tool. It is also possible you still have a different problem. Only the service book can tell you meaning of the codes. (Not a book you can buy at an auto parts store, but a dealer service manual for that specific vehicle).

Oct 17, 2014 | Nissan Pickup Cars & Trucks

1 Answer

My Nissan np300 2011 is showing code p1622 inj adj val unregistered what is the problem

First of all. Changing injectors about just because the power of your vehicle is low, is highly unlikely to solve your problem. Like trying for a grand slam when blindfolded.

Second of all it is highly probable that unless your new injectors were purchased from the dealer for your car specifically, that you got similar injectors of a different impedance, or perhaps entirely different injectors, this would easily explain your CEL code because the engine computer has no idea what to do with the injectors you installed.

My advice would be to go back to the original injectors, and try to solve your low power issue another way like checking the O2 sensor, or making sure you TPS is properly adjusted.

Oct 17, 2014 | Nissan Pickup Cars & Trucks

1 Answer

Nissan np300 smokes while idling

Valve stem seals are hard and allow oil to be sucked into the engine thru the valve guides.

Jan 10, 2014 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides