Question about Volkswagen Transporter
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: vw transporter t5 04 van t30 2.5
I had the same problem with my T5 130. My mechanic replaced the head gasket to no avail,then we checked the oil filter,that was ok.then we went on to a web forum and found out that the AXD engine suffers from water pump failure.We took it off and it was corroded,the seal had failed and was pumping water into the block.My advice,CHECK WATER PUMP FIRST! Good luck Marc,Somerset.
Posted on Feb 01, 2009
The problem is probably a high resistant connection to the comfort module under the drivers seat (the little black box).
i had the same problem what i did was
disconnect the battery
look under the seat and you will see two sets of wires feeding the comfort module wrapped in a cloth tape individualy then together. carefully strip the tape back about 6-10 inches from where they are taped together to expose the wires.
you should find a spliced connection on the red blue wire (probably coroded). you'll have two red blue wires feeding up from the floor and one feeding on towards the comfort module.
i cut the connection off getting rid of the corrosion, stripped back the wires then re twisted and soldered them together making sure all wires made a good connection to each other. then re wrapped them in insulation tape.
re connect the battery
tried the key in the door which worked then tried the fob which also worked problem solved in 10mins.
Posted on Dec 26, 2009
VW Transporter 2.5 TDI-PD, (made year: 2003 ... 2007), engine code: AXD, 130 HP / 3500 rpm.
Important note: use new bolts!
Flywheel/driveplate torque setting: 60 Nm + 90 degrees.
Clutch to flywheel torque setting: 22 Nm.
Posted on May 21, 2010
Tips for a great answer:
Jan 24, 2017 | Volkswagen Transporter Cars & Trucks
Oct 27, 2016 | Volkswagen Cars & Trucks
Mar 04, 2015 | Volkswagen Transporter Cars & Trucks
Sep 15, 2013 | Cars & Trucks
Jun 22, 2012 | Volkswagen T5 Cars & Trucks
Jan 07, 2011 | Volkswagen Microbus Cars & Trucks
May 21, 2010 | 2004 Volkswagen Eurovan
Apr 20, 2010 | 1997 Volkswagen Eurovan
Feb 05, 2010 | Volkswagen Touareg Cars & Trucks
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: