Question about 2002 Ford Crown Victoria

2 Answers

Wipers keep skipping half the window

When im driving and turn the wipers on they both skip the window hald way cleaning coming down ive taken the cowel apart the bar that runs from one pivot point to other is loose ? unknown to me if that normal..... and the passagenr ball where the wiper on sits moves up and down unlike the driver side please help

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 818 Answers

The springs in the wiper arms go bad -replace the arms and that should help the holding onto the windshield problem as far as the loose-try a junk yard at least to get your hands on another car like yours and see what its like-then you could buy what you need if you can figure out what part has failed- cheers Denny

Posted on Nov 23, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,219 Answers

Change the mechanism with one from a scrapyard ,sounds like its worn

Posted on Nov 23, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Windshield wiper arm on passenger side won't move.

tighten the nut under the cap, of the wiper

Posted on Dec 09, 2008

  • 2 Answers

SOURCE: windshield wiper link that connects to motor comes

im afraid its the linkage replacement the grease is just there for the lubrication what usually happens is they wear out and only alternative is to replace the linkage

Posted on Apr 17, 2009

cj2176
  • 520 Answers

SOURCE: rear wiper hangs loose, wont wipe

Sounds like the spring has broken in the wiper arm. If you pull the cover off of the base of the wiper arm there will be a screw. Remove the screw and pull straight out on the base of the arm. That will release it from the actuator. You should be able to pick one up at a parts house for about $20 to $40 dollars or you could shop a salvage yard for about $10. Hope this helps. Good luck. Please re-post with updates. Thanks cj2176.

Posted on Jul 12, 2009

BCAS1298
  • 3092 Answers

SOURCE: my driver side windshield wiper stopped working.

The bar that connects to the arm that connects to the motor came off. Remove wiper motor to get to that connection, Autozone will have that part in there (help) line.

Posted on Jan 04, 2010

ftw1952
  • 10319 Answers

SOURCE: how do i replace the bushings on my windshield

the parts in order for this wiper system has 4 items involved.
the wiper motor, the wiper transmission, the wiper arms, and the wiper blades
if the bushing is too hard to install its destroyed and it will jamb up on you
replace the transmission unit is the best option to do

Posted on Mar 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My window wipers dont work


Nathan you need to tell what Make...Model... and year of what we are working on buddy ? lol

Aug 05, 2012 | Cars & Trucks

1 Answer

96 volvo windshield wipers wont clean window


Assuming you have good wiper blades and have cleaned the windshield (no oil or other contaminants) I'm guessing the arms need to be replaced. The springs are failing to keep proper pressure on the blade allowing them to skip or lift at speeds.

Jan 12, 2012 | Volvo 850 Cars & Trucks

1 Answer

My car is skipping i have replaced my coil packs my plugs and wires injectors and vaccume lines still skipping when im at idle and driving down the road


Have the module tested, and do a compression test to make sure its not a weak cylinder due to low compression, this car is listed here as a 1995 camaro which cant be but make no diffrence, remove module and test if it low compression then i would do a motor vac, this is a fuel system cleaning and decarbonizing, i ve had a few that other shop told them that motor neede rebuilding , itold customer to try a motor vac and it worked it had carbon build up on the valves keeping one cylinders valves from closing all the way. if driven too long the valves will get brunt and then its $$, hope this helps.

Sep 13, 2010 | 1995 Chevrolet Camaro

1 Answer

I hava a 1998 gmc with a 5.7 began skipping have


p1345 if the distribator has been taken out it will bring up this code lift it back up and turn it one tooth in either direction reset the code and check it p1404sounds like egr cheapest place too get one is rockauto.com

Apr 20, 2010 | 1998 GMC Sierra

1 Answer

3RD GEAR


Yes it is needing some sycronizers replaced probably and might also be needing a gear replaced in there. and also it will not hurt to keep driving it just skip shift like you have been so it doesnt cause any further problems .. if you keep using 3rd gear it might break off something in time just skip it .. thanks Jerry and holler if you need more.

Apr 12, 2009 | 2001 Ford Escort ZX2

2 Answers

Left side indicator keeps coming on and off


possible the indicator arm/stalk will need a new one

Jan 29, 2009 | 2005 Peugeot 405

1 Answer

Skipping


spark plugs

Dec 07, 2008 | 1996 Kia Sportage

1 Answer

Skipping


When was the last time you had the timing belt checked and or replaced? That should happen at least every 60k to 70k miles. It sounds like your timing belt has stretched or jumped timing.

Nov 23, 2008 | 1993 Ford Mustang

Not finding what you are looking for?
2002 Ford Crown Victoria Logo

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...