Question about Ford Cars & Trucks
My adjustable pedals quit working. they had a little noise like it wanted to work then that stopped too
Check the fuses-if nothing blown-stick your head under the dash and see if wires or something got pinched or cut -cheers Denny
Posted on Nov 23, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I would recommend removing the door panel to check power to the motor. If you have power when the switch is pressed ,the motor is bad. You will have power on one wire in the up position and power on the other wire in the down position. I hope this helps,good luck
Posted on Jul 20, 2009
If the brake pedal makes a crunching noise,try flushing out the brake fluid. For some reason after flushing the noise goes away. I hope this helps,goodluck.
Posted on Aug 01, 2009
Maybe, you can diag yourself with a test light and an ohmmeter. These will cost less at sears than having a dealer diag it. Check fuse 109 in the cab, that's the fuse for the driver's seat module. If that fuse is ok, then check power at the module. It's a little black box under the driver's seat with i think 3 connectors. Back probe the dark green wire at the connector with a test light, you should have power, even with the key off. If not, repair the circuit. Clamp the test light to battery positive and back probe the black wire, if the light does not light, repair that ground circuit. Test the memory set switch by measuring with an ohmmeter points 7 and 2, 7 and 6, 7 and 5 resistance should be less than 5 ohms, if not replace it. If all these tests pass, disconnect the connectors from the module and give 12v to the red and white wire. If the seat moves, have the module replaced at the dealer, it will have to be programmed.
Posted on Aug 10, 2009
i have a 05 ford f150 supercrew my power adjustable pedals didnt work my mirrors didnt work n the driver seat didnt work i found the problem i had a broken wire coming out of the #3 fuse block it it was orange with a green stripe it has some heat shrink on it i cut the heat shrink tape and the wire was badly corroded i replace the splice with 18 gauge wire and and everything came back on good as new
Posted on Feb 27, 2010
Tips for a great answer:
Sep 28, 2012 | 2001 Ford Expedition
Apr 17, 2011 | 2002 Ford Expedition
Dec 10, 2010 | 2002 Ford Expedition
Nov 07, 2010 | 2002 Ford Escape
Apr 25, 2010 | 1997 Ford Expedition
Aug 30, 2009 | 1999 Isuzu Hombre
Jul 28, 2009 | 2003 Ford Expedition
63 people viewed this question
Usually answered in minutes!