Question about 2004 Honda Odyssey
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).
Posted on Jan 24, 2009
You must have a dead battery or had the battery disconnected at somepoint. That's OK. All you have to do is pull up on your window switch and hold it. Once the window is all the way up, continue to hold the switch. You will hear a small click from a relay. This sound indicates the window is programmed. You may have to try a coupe of times, but it's that simple! Message again if you have any more questions.
Posted on Apr 26, 2009
Posted on Jul 15, 2009
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.
Posted on Nov 22, 2009
I had same problem. Could be the remotes need to be reprogrammed or replaced; or one of your door locks might not be working right.
Posted on Jul 18, 2010
Tips for a great answer:
Oct 13, 2014 | 2005 Honda Odyssey
Jul 10, 2014 | 2005 Honda Odyssey
Nov 17, 2012 | 2002 Honda Odyssey
Apr 15, 2011 | 2006 Honda Odyssey
Nov 22, 2009 | 2006 Honda Odyssey
Oct 31, 2009 | 2002 Honda Odyssey
Jul 14, 2009 | 2005 Honda Odyssey
Jul 09, 2009 | 2007 Honda Odyssey
Jun 11, 2009 | 2002 Honda Odyssey
31 people viewed this question
Usually answered in minutes!