Question about 2003 Ford Explorer

Open Question

P2198 Ford ranger 3.0L - 2003 Ford Explorer

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15441 Answers

SOURCE: 3,0L Ford ranger 91 want shift into over drive.did before I pulled trans to replace rear main seal in Truck.please help

Overdrive is engaged with a torque convert clutch lockup. ATF travels through the splined shaft on the transmission to the torque converter. Check the seals on the converter and the trans.

Posted on Aug 25, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3,0L Ford ranger 91 want shift into over drive.did before I pulled trans to replace rear main seal in Truck.please help


Overdrive is engaged with a torque convert clutch lockup. ATF travels through the splined shaft on the transmission to the torque converter. Check the seals on the converter and the trans.

Aug 25, 2015 | Ford Cars & Trucks

1 Answer

What is P2198 Code on a 2004 ford f-150 truck


P2198 Lack Of HO2S-21 Switch
Sensor Indicates Rich

Right Front O2 Sensor Issue

Now you have to look at data &
figure out why

Nov 13, 2014 | 2004 Ford F150

1 Answer

2007 ford f-350 super duty with a 5.7 l v8 codes p2198 PCM keep coming up


Why wouldn't it keep coming up

-------Your doing nothing-------

Not reading your owners manual
Not studying OBD Vehicle Systems
Not Googling your fault codes-you got the codes but do nothing

P2198 --Lack of HO2S-21 Switch -Sensor Indicates Lean

If you did the required Preventative Maintenance & replaced
the Front Oxygen Sensor BEFORE they failed at 100,000 miles,
you may not be in the situation

Every time the Emissions Monitors run, the codes come back or never left

Need a repair shop, to road test with scan tool & put a couple hours
diagnostic time into the truck & about 6 or 8 hours getting caught up
on the maintenance required

Jul 22, 2014 | 2007 Ford F-350 Super Duty XLT

1 Answer

I have a 2005 Freestar Se and the P2196 and P2198 problem? Is this the fuel pump problem and how do I fix the problem?


codes p2196 and p2198 refer to the oxygen sensors
p2196 is the HO2s sensor 1 bank 1--signal stuck rich or no signal===causes HO2s --fuel pressure --injectors ---air intake restricted---wiring ---ECM
for p2198 it is HO2S 1 bank 2 --signal stuck rich===causes --same as for p2196

Apr 04, 2014 | Ford Cars & Trucks

1 Answer

I got a P2198 & P2197 code for my 2006 Ford Escape


first check the fuses they are heated o2 sensor codes if the heater fuse blows the codes will turn on as can a bad sensor

Aug 15, 2012 | Ford Cars & Trucks

1 Answer

2001 ford tarus belt diagram picture


Please rate highly if this helps. Good luck.

3,0L 2 Valve

41386ca.gif
Item Part Number Description 1 3A733 Power steering pump pulley 2 8620 Drive belt 3 2E884 A/C clutch pulley 4 6316 Crankshaft pulley 5 6B209 Drive belt tensioner pulley 6 10344 Generator pulley

Item Part Number Description 1 10346 Generator pulley 2 8678 Belt idler pulley 3 3A733 Power steering pump pulley 4 8620 Drive belt 5 2E884 A/C clutch pulley 6 6B209 Drive belt tensioner pulley 7 6312 Crankshaft pulley 8 8509 Water pump pulley

3.0L 4 valve

668e212.gif

Sep 09, 2010 | Ford Taurus Cars & Trucks

1 Answer

What is p2198


The Ford DTC (Diagnostic Trouble Code) P2198 refers to a bias in an O2 sensor. Specifically, Bank 2 Sensor 2. It is most likely stuck reading mixture rich.

Aug 25, 2010 | 2003 Ford Explorer

1 Answer

Have a 2007 ford 500 wont start shows codes po191 p2196 p2198


P0191 is Fuel Rail Pressure Sensor "A" Circuit Range/Performance
P2196 and P2198 are lean bank 1 and lean bank 2. You normally show lean bank codes if the air-fuel ratio is not correct. The most common cause is a hole in the hoses between the PCV valve and the intake on the motor (back of the motor generally). The fuel rail pressure sensor code could either be caused by the vacuum leak or by a failing fuel regulator. I would first check for holes in the rubber hoses especially where there are right angle rubber hose connectors. Look for soft squishy or oily spots on the hoses.

Aug 14, 2010 | 2006 Ford Five Hundred

Not finding what you are looking for?
2003 Ford Explorer Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...