Question about 1994 Honda Civic
All i know is it is behind the manifold,there are two phillip screw holding it on has something to do with the water system
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove and raise upper hose at thermostat end and remove lower rad hose.
Fill rad with a hose and watch for flow from bottom rad hose and/ or bottom rad hose connecton.......water should fall though rad easily.
Honda rads are cheap.....any restriction....replace rad.
Remove thermostat....fill thermostat housing with hose and watch for water flow at bottom rad hose.
Remove heater hoses.......flush back and forth until a good flow is present "With heater control set to hot" if no or poor flow....replace heater core.
Stop leak can plug everything.
Also.......not likely causing over heating....but ....at your mileage,if you do not know if the timing belt has been changed.....CHANGE IT NOW!
Water pump is optional at this mileage.
Posted on Aug 24, 2009
Testimonial: "thank you for the very clear, step by step instructions for diagnose and remedy"
Tips for a great answer:
Jul 14, 2015 | Honda Cars & Trucks
Jul 22, 2017 | 1994 Honda Civic
Apr 04, 2013 | Cars & Trucks
Apr 06, 2010 | 1994 Honda Civic
Mar 05, 2010 | 1994 Honda Civic
Dec 10, 2009 | 1994 Honda Civic
Aug 23, 2009 | 1998 Honda Civic
May 17, 2009 | 2004 Honda Civic
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: