Question about Land Rover Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Had the same problem with my 03 Disco. Went through the usual, checking the fuses, etc. I went ahead and replaced my break light switch on the brake pedal. $15.00 fix, or I thought so; still had the problem! Took it in for repairs and found out it was fuses after all... To get the parking lock to disengage you need to pull of the housing, which is tough and then press in the locking pin at the base of the shift lever to shift out of park. you can do it with the engine running and it will drive just fine until you put it into park again. Check your brake lights if there is a problem. Could be a sign of the brake switch failure. In my case the lights were out, but a cheap trailer rental did the damage. The short in the trailer blew some fuses and it was a problem that cost me $60.00 at the repair shop....
Posted on Aug 27, 2009
The discovery is as previously mentioned permanent four wheel drive.However the difflock/range lever in most suffers from lack of use and siezes all i had to do when i bought mine was plenty of WD40 and patience as i don't think it had been in low range or difflock from the day it was built.don't try to force it just spray it and let it soak then try keep doing this and it should free up if not it may be the selector grubscrew has worked loose just threadlock it and screw it back in.
Posted on Feb 16, 2010
No, likely to be caused by the actuators in the lock mechanism failing usually causing the door to remain locked. The boor door can also fail this way, as do the front side doors. Replacement requires the whole lock unit to be replaced at a cost of roughly £60 a lock, and a hours work. Helps if you have small hands. Requires a full strip down of the door and you will need the lock unit, trim clips (a few quid) and a trim removal tool (tenner). You can bodge with a flat head screwdriver, but the tool does help prevent damage to the clips & trim panel.
Posted on Feb 22, 2010
Tips for a great answer:
Apr 15, 2015 | 2001 Land Rover Range Rover
Oct 28, 2013 | 2001 Land Rover Discovery Series II
Mar 22, 2013 | 1998 Land Rover Range Rover
Jul 03, 2010 | 2004 Land Rover Discovery
Mar 05, 2010 | 1999 Land Rover Range Rover
Jul 05, 2009 | 2006 Land Rover LR3
Jun 18, 2009 | 1998 Land Rover Range Rover
Jan 10, 2009 | 1996 Land Rover Range Rover
12 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: