Question about Toyota Camry

Open Question

What size and thread are the Toyota Camry alternator bolts

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
luny1369
  • 4 Answers

SOURCE: What is the size of the bolt for alternator?

which one?

Posted on May 15, 2009

Ad
  • 5 Answers

SOURCE: I have a 2000 Toyota Camry LE. I wanted to know

try all the scokets you have

Posted on Jul 27, 2009

projdoc
  • 2237 Answers

SOURCE: replace alternator belt only for 1993 toyota camry

loosen the mounting bolts on the alternator, remove the old belt, replace with the new belt, slightly tighten the top mounting bolt, pull the alternator up until the belt is tight or if there is an adjustment bolt, crank down until tight (shouldn't bow more than 1"), and tigten other hardware.

Posted on Aug 12, 2009

  • 1 Answer

SOURCE: replacing the timing belt and water pump on a 1995

Threads are standard. I use a 1/2" drive breaker bar on the bolt. Position the bar so that if you turn it clockwise it will hit the ground or the car frame. Then I turn the ignition to start for just a moment, cranking the engine over with the starter which will loosen the bolt. DO NOT let anyone hold the bar or stand anywhere near it if you try this technique. I have done it many times with no problems.

Posted on Mar 09, 2010

  • 1757 Answers

SOURCE: HOW TO SET TIMING ON 96 TOYOTA CAMRY 2200 MOTOR

Click on the following free direct Link. It has the Timing: Pulley, Belt and Mark Diagrams for your 1996 Toyota Camry. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/toyota/model/camry/1996_toyota_camry_timing_belt_diagram_marks.htm

Posted on Mar 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you measure banjo fittings


There are these things specified, length, thread size, hex head size (SW).

https://www.landefeld.de/gruppe/en/banjo-bolts-1-way-metric-din-7643-version-a/8910300

That one is of course a metric fitting, but you really only need to order new metal seal washers for them unless the fittings are lost or damaged.

Mar 21, 2017 | 1995 Toyota Camry

2 Answers

What other car rims wil bolt up to 08 camry


there are some good answers but it all comesdown to the rubber or tires you want on the rims....

but for the best answer go to a tire store and ask so you know for sure

Feb 17, 2015 | 2008 Toyota Camry

1 Answer

What is the final torque in ft lbs for the head bolts for 2.4 2003 toyota camry


clean bolt threads and clean out the threads in the head. Lightly oil the bolt threads and tighten in the correct sequence to 36 ft/lbs Using a degree spanner tighten in sequence 90 degrees and the again in sequence another 90 degrees . The final torque is in degrees not ft/lbs. Go on line to toyota camry head bolt torque then find the autozone page and you will find diagrams of how to do it.

Oct 05, 2014 | Cars & Trucks

2 Answers

How to replace voltage regulator on 1990 Toyota camry.


Assuming the regulator is inside the alternator, as most are,
you have to remove the alternator from the car,remove the
4 long bolts that hold the 2 halves together,then remove the
screws or bolts holding the regulator

I suggest you see if the regulator is avail
You may be better to go to an auto electric shop
that does just that, & you may be able to buy the
regulator there ,or wait while they install it & test
to see if it needs replacing.

May 30, 2012 | 1990 Toyota Camry

1 Answer

What size and thread are the exhaust manifold studs and nuts for a 2000 toyota camry?


Earlier toyotas (likely, yours too) used 8mm studs, pitch was 1.25, not sure of length. M8-1.25 X ??. I tried to get help from toyota parts place for size of intake manifold bolts and studs-they couldn't help, because parts list only showed part number, not the size. And of course they had none in stock.

Nov 27, 2011 | 2000 Toyota Camry

2 Answers

My alternator is missing the bolt that mounts it to the block.... its apparently been gone and is causing the alternator to sit about a 1/4 inch crooked which is causing squealing and breaking belts.....


just go to a salvage yard or junk yard and ask them to get a bolt from them in one of there cars of your make and model and year so they might just give it to you for free if they have your car there. Also autozone might help in telling you the bolt size too.

May 24, 2011 | 1992 Toyota Paseo

1 Answer

I have a problem I can`t take out the alternator fuse in my 1993 toyota camry


You cannot get it out because it is bolted in. You must remove the shell of the fuse-box in order to access the bolt holding the fuse in.

Jun 07, 2009 | 1995 Toyota Camry

1 Answer

Center main mototr mount bolt is missing,need size of bolt so I can replace it myself.


More than likely the mount is bad and you will have to buy the bolt from the dealer or a fabricating shop that sells metric bolts, or go to a junk yard to get a replacement for same car. pull the nut off the other side and measure from the top of the bolt to the end of the threads then go buy one at the store using the nut as your size guide and thread pitch and get a grade 8 bolt to replace it with.

May 31, 2009 | 1993 Toyota Camry V6

2 Answers

Replace alternator belt only for 1993 toyota camry


loosen the mounting bolts on the alternator, remove the old belt, replace with the new belt, slightly tighten the top mounting bolt, pull the alternator up until the belt is tight or if there is an adjustment bolt, crank down until tight (shouldn't bow more than 1"), and tigten other hardware.

Mar 28, 2009 | 1993 Toyota Camry V6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...