Question about 2007 Cadillac CTS-V Sedan

Open Question

How to unclog windshield washer tube + cadillac cts 2007

Windshield washer wont work and the reservoir seems to be full.

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 113 Answers

SOURCE: I need a picture of the windshield drain on a 2001

You need to clean out the cabin filter drain tube. The cabin filter housing allows the air to enter the cabin through the HVAC system. When water gets in here, the drain tube allows it to escape. If the drain tube is plugged with leaves and dirt, the housing fills up and it overflows into passenger floor area.
Remove the filter, clean the drain tube (prepare to get your feet wet) and put in a new filter.
The filter is below the pass side WS wiper under the plastic cover.

Posted on Aug 18, 2009

  • 389 Answers

SOURCE: windshield washer stays on too long

Do you have one of those washers that wants to wsh the whole car for yu when you only need the window done? I am thinking it is in the switch that you push or turn to make it squirt. I will venture a squirt of WD 40 in the switch will solve this problem? Just something you can try, Please give me a good thunbs up for the guess if you please. I need the good marks, Let me know if it worked, Raz

Posted on Apr 19, 2010

  • 571 Answers

SOURCE: My windshield washer does not spray on my Cadillac

1. No liquid
2. burned fuse
3. Pump dead
4. Something clogged in the system (tubes, nozzles etc).
5. Leaking/disconnected tubes

Posted on Jun 08, 2010

ftw1952
  • 10319 Answers

SOURCE: 1999 Cadillac DeVille, no power to windshield

the pump is located in the reservoir and is probably shorted out. You are lucky it lasted this long. You need to get a replacement at any GM dealer

Posted on Nov 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windshield wipers won't turn off on 2005 cadillac cts. Pulled the fuse and they did not stop.What could be the issue?


There could be a defect in the windshield wiper/washer module or the wiper switch.

Oct 09, 2016 | 2005 Cadillac CTS

1 Answer

How do you replace the windshield washer pump on 2008 ford focus, wipers work but no spray comes out


The hose could be clogged ! Do you know where you add the washer fluid ? Somewhere on the bottom of that plastic bottle is the washer pump .
Removal and Installation
> WARNING: Windshield washer solution contains methanol, which is poisonous. Observe all cautions and warnings indicated on label of washer solution container. Failure to follow these instructions may result in personal injury.
> CAUTION: When replacing the windshield washer pump be careful not to damage the rubber grommet.
> CAUTION: Do not operate the windshield washer pump before filling the reservoir. Failure to do so could result in premature pump failure.
  1. NOTE: When installing the reservoir, the filler neck must be lubricated using a water-based lubricant.
    Remove the bolt and the windshield washer reservoir filler neck.
  1. Remove the RH fender splash shield. For additional information, refer to Section 501-02 .
  1. Remove the foam filler and remove the retainer.
  1. Remove the 2 screws and the accessory drive splash shield.
    • To install, tighten to 5 Nm (44 lb-in).
  1. Remove the nut, 2 bolts and position the A/C accumulator aside.
    • To install, tighten to 9 Nm (80 lb-in).
  1. Unclip the A/C lines from the inner fender well.
  1. Drill out the rivet and remove the bracket.
  1. Remove the 2 bolts, slide the windshield washer reservoir assembly forward to release it, and position the washer reservoir aside.
    • Install the upper bolt followed by the lower bolt, and tighten to 5 Nm (44 lb-in).
  1. Disconnect the windshield washer tube assembly from the pump and release the windshield washer tube assembly from the washer reservoir.
  1. Disconnect the electrical connector from the windshield washer pump.
  1. Release the wiring harness from the reservoir, and remove the washer reservoir.
  1. To install, reverse the removal procedure.

Apr 07, 2015 | Ford Cars & Trucks

1 Answer

My windshield washer reservoir won't hold washer fluid.


The seam on the windshield fluid container is broken and leaking like crazy.

Jun 10, 2017 | 2001 Oldsmobile Intrigue

1 Answer

Windshield cleaner/washer fluid is not working


Check that the fluid reservoir is full of windshield wiper fluid and that the pump is not worn out or burnt out. May have to get a new pump and remove and replace to fix this problem. Also, check that the windshield wiper fluid is winter type and not summer type in cold climates.

Nov 04, 2011 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

My windshield washer does not spray on my Cadillac CTS. What is the problem?


1. No liquid
2. burned fuse
3. Pump dead
4. Something clogged in the system (tubes, nozzles etc).
5. Leaking/disconnected tubes

Jun 08, 2010 | 2004 Cadillac CTS

1 Answer

Windshield washer stays on too long in my cts 2007


Do you have one of those washers that wants to wsh the whole car for yu when you only need the window done? I am thinking it is in the switch that you push or turn to make it squirt. I will venture a squirt of WD 40 in the switch will solve this problem? Just something you can try, Please give me a good thunbs up for the guess if you please. I need the good marks, Let me know if it worked, Raz

Apr 19, 2010 | 2007 Cadillac CTS 3.6L

1 Answer

Mercury villager 1994 washer pump not working


the pump motor likely is bad. get a used washer fluid reservoir at a pick n pull yourself or at car-part.com. page with * is lowest cost.

Pump and Reservoir, Windshield Washer Removal
  1. Disconnect the battery ground cable (14301).
  2. Raise and support the vehicle.
  3. Remove the RH wheel (1007).
  4. Remove the RH front fender splash shield (16103). Refer to Section 01-02 for the removal procedure.
  5. Remove the windshield washer reservoir top bolt.

  6. Disconnect the windshield washer reservoir fluid level sensor electrical connector.
  7. Disconnect the rear window washer pump electrical connector from the rear window washer pump.
  8. Disconnect the windshield washer pump electrical connector from the windshield washer pump (17664).
  9. Place a suitable drain pan under the windshield washer reservoir (17618) and drain the washer fluid.
  10. NOTE: The rear window washer hose end is color-coded, matching the connector on the rear window washer pump. Match the colors to ensure proper installation.

    Disconnect the washer hoses from the windshield washer pump and the rear window washer pump on the windshield washer reservoir.

  11. Loosen the two windshield washer reservoir side bolts.
  12. Remove the windshield washer reservoir by sliding it out of the side slots.
  13. Remove the windshield washer pump.

    Installation
To install, reverse the removal procedure. Tighten the lug nuts (1012) to 98-118 Nm (72-87 lb-ft).

Sep 09, 2009 | 1994 Mercury Villager

1 Answer

Windshield washer fluid reservoir - MB ML 350


right where the lines connect to reservoir, has little black seals that leak. I recommend removing reservoir, empty it out, then use RTV silicone and place it between seals and reservoir. Let it dry for FULL day. than reinstall.

Jun 23, 2009 | Mercedes-Benz ML350 Cars & Trucks

2 Answers

Wiper fluid level sensor replacement


Reservoir —Windshield Wiper

Removal
  1. Remove the RH wheel; refer to Section 204-04 .
  1. Position RH splash shield aside.
    1. Remove six screws.
    1. Remove three pin-type retainers.
    1. Position RH splash shield aside.
  1. NOTE: Windshield washer fluid should be collected in a container after the windshield washer hoses are disconnected.
    Disconnect the electrical connector and washer hoses.
  1. Remove the upper reservoir bolt.
  1. Remove the windshield washer reservoir.
    • Loosen the two lower reservoir bolts.
------------------------------------------------------------------------------------

Jan 15, 2009 | 2000 Mercury Villager

Not finding what you are looking for?
2007 Cadillac CTS-V Sedan Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...