Question about 2007 Kia K2700 Workhorse

Open Question

Kia k2700 tappet clearance

Tappet settings

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 384 Answers

SOURCE: What causes 15amp eng fuse to blow as soon as I change it , on kia k2700 diesel 2006

a short to ground pull pos cable off battery load test battery if good ,l\follow power back to fuse box looking for breaks pinches or other things that would cause a short. Look where the wires go throught the cab , make sure the fuse block bolt is tight if it has one . look for hot spots in fuse block repair as needed good look around any place that power is run to it

Posted on Dec 12, 2014

  • 40646 Answers

SOURCE: How do I set the valve clearances on a kia 2700

hydraulic followers should not need adjustment as it is automatically done by the oil pressure in the followers.

Posted on Dec 20, 2014

  • 29 Answers

SOURCE: Kia k2700 bakkie

check YouTube someone may have a video on step by step instructions for your year make and model of car

Posted on Jan 17, 2015

emissionwiz
  • 74914 Answers

SOURCE: kia K2700 makes noise like a drum after i changed pistons ; rings and bigend bearings. i also changed cylinder head but using old injectors

I would need to hear the noise to have any chance of guessing as to where it is emanates from.

Posted on Oct 28, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put timming in on kia 2,5 1ton trok


Do you mean Set the timing on a Kia K2700 truck?

Mar 04, 2015 | 2007 Kia K2700 Workhorse

1 Answer

What is the tappet setting for the KIA 2700 truck?


for the K2700 II 2.5 TCi 2004 - 07 engine code D4BH it is inlet 0.15mm cold and exhaust is the same 0.15mm cold. for the K2700 II 2.7D 2004 - 08 Engine code J2 it is inlet 0.30mm cold and exhaust is 0.38mm cold.

Dec 24, 2014 | Kia Cars & Trucks

1 Answer

3 1 tappets


if you just had this overhauled from a shop and this is happening you have warranty go back to the people that rebuilt it and have them honour their warranty. if you built it and you did the entire engine and not just the bearing, then check the oil pressure you may have bad lifters or cam or cam bearings causing not enough pressure.

Aug 27, 2014 | 2007 Kia K2700 Workhorse

2 Answers

HOW TO DO TIMMING FOR KIA K2700 WORKHORSE


ALIGN THE TIMING MARKS AS PER THE ATTACHED FOTO. on the gears there are timing marks.
timming-kia-k2700-workhorse-bm2ho3s54k4dok42ylsl0luo-2-0.jpeg

Jun 21, 2014 | 2007 Kia K2700 Workhorse

1 Answer

Valve setting for kia k2700


Best thing to do is get a Haynes manual
for that car the valve clearance settings will be
in the book an make sure car in warm when setting
doing it this way you get facts an not
opeions

Jun 01, 2014 | Cars & Trucks

1 Answer

Valve clearance for kia k2700


You should call a Kia dealership and speak with a mechanic. He can look it up for you.

Mar 28, 2014 | Kia Cars & Trucks

1 Answer

How to measure tappet clearance with dial gauge


When setting tappets, it has to be born inind that the valve stem wears an indentation into the face of the rocker. This prevents a really accurate tappet adjustment, so the customer is right again. If you do not posess a tappet setting dial gauge, a normal engineers dial gauge will do just as well. The procedure is the same as using your feeler gauge except that you set the dial gauge up on the cylinder head with the pointer resting on the head of the rocker. Press down fairly firmly on the rocker valve end and zero the gauge. Next lift up on the rocker and read off the clearance, from the gauge, Use a magnetic base to support your gauge and repeat the pocedure for each valve pair.

Mar 25, 2010 | 1988 Mitsubishi Cargo

Not finding what you are looking for?
2007 Kia K2700 Workhorse Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...