Question about Ford Escape

Open Question

How to replace a cracked 2002 ford escape engine cradle

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fknstart
  • 404 Answers

SOURCE: removal of rear brake drum 2002 ford escape

make sure handbrake is off take wheel off hit the drum with a mallet not steel,as it will brake,hit on outter diametter face of drum, try and rotate as you twist off

Posted on Jan 05, 2009

chuck943
  • 783 Answers

SOURCE: ford escape 2002 firing order

V6 1-4-2-5-3-6 back bank pasenger side right to left cylinders 1 2 3
front bank passenger side right to left 4-5-6
4 cly 1-3-4-2

Posted on Jun 23, 2009

Pops65Pony
  • 137 Answers

SOURCE: whats firing order diagram of 2002 ford escape v6

Ford V6's - rear bank of cylinders are 1 - 2 - 3. Front bank are 4 - 5 - 6 starting from passenger side (front) of engine.
Your firing order is
1 - 4 - 2 - 5 - 3 - 6

You're welcome.

Posted on Sep 29, 2009

  • 1 Answer

SOURCE: 2002 Ford Escape V6. Oil indicator light on, but pressure holds.

My 2002 Ford Escape had exactly the same problem as described. Dealer replace oil pressure sending unit (oil pressure switch) and problem still existed while leaving dealer about 3 miles away. I took the car back to the dealer again in two days and the oil pressure light kept of blinking sporatically all the way to the dealer. Dealer checked connections and they drove the car around and the oil pressure light never came on. I picked the car up from the dealer and I've had no problems with the oil pressure light flashing. I wonder if there is a microprocesser in the oil pressure sending unit which has to be given some time to be recalibrated to the cars main computer module?

Posted on Feb 02, 2010

  • 70 Answers

SOURCE: cruise control ford escape 2002. ford escape

If the cruise lamp comes on and the cruise does not set i would advise inspecting the cruise cable and make certain it is not broken, if ok the the servo has likely failed.

Posted on May 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does anybody have a color coded vacuum / EGR hose diagram for a 2001 mazda tribute 3.0 LX


Matthew, Vacuum hose diagram should be under hood on a decal/label, on hood it self or on rad cradle usually. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Escape 3 0l V6 Engine Vacuum Leak Testing
Escape City Ford Escape Forums Ford Escape Mercury Mariner Mazda Tribute...
Remove Upper Intake Manifold 2002 Mazda Tribute Part 1 Detaching...
2001 mazda tribute 3 0 LX Detailed vacuum EGR hose routing diagram Google...

Jul 02, 2016 | Mazda Cars & Trucks

2 Answers

I am having difficulty locating it. I need to know how to locate and replace a thermostat on a 2002 ford escape


Follow the top radiator hose down to where it connects to the engine. You should find a dome shape item or a couple of smaller bolts that attach to the engine to the side of the radiator hose and the thermostat will be inside the housing. You will need to drain the radiator, remove the bolts holding the thermostat housing to the engine and remove the old stat and put in a new one be sure to make note of how the stat is facing when you remove it and put the new one in the same way. then reconnect the thermostat housing making sure the gasket is in place so it won't leak, then refill the radiator slowly so you don't cause an air lock in the radiator, with cap still off start the engine and allow it to warm up until the stat opens and then you will need to add more antifreeze to the system. Double check for any leaks. Turn on the heater and make sure you have good heat and you should be good

Jan 11, 2016 | Ford Cars & Trucks

2 Answers

My 2002 ford escape is overheating though we've changed the cracked head


Check your thermostat, could be locked/closed and won't let water circulate through the engine block. Also make sure your radiator fan is working, after you start you car and the engine reaches the proper temp, your radiator fan should kick in to cool the engine.

Jun 07, 2015 | 2002 Ford Escape

3 Answers

How to replace a thermostat on a 2002 ford escape


Hi there, I'm Al the owner of Big As Auto Repair

I look forward to helping you with your thermostat problem but, I'll need to know the engine size of your 2002 ford escape. Go to my website below with the information and I'll help you with your problem. Have an awesome day. Auto Repair

Feb 22, 2015 | 2002 Ford Escape

1 Answer

Vehicle wont engage in drive but can shift from 1st to second to drive and od off light is flashing on my 2002 ford escape 3.0 4wd


The only reason the lower gears are working is because they engage a separate clutch to assist in engine breaking on downhill grades. You have most likely cracked a forward piston in the transmission, and the transmission may need to be overhauled or replaced.

Aug 15, 2010 | Ford Escape Cars & Trucks

1 Answer

How many milles change timing belt ford escape 2002


On a 2.0L (DOHC) Vin B replace the belt at 120,000 miles.
Warning: This is an interference engine. If the belt breaks serious engine damage will occur.

Nov 29, 2009 | 2002 Ford Escape

1 Answer

2002 Ford Escape won't start or stay running unless you are pressing on accelarator pedal


I had this same problem. It was a cracked air intake manifold. That is where you can start.

Sep 14, 2009 | 2002 Ford Escape

1 Answer

Need to replace 2002 Escape 3.0 engine. Is it


If you are Experienced and Have All the tools you Need Y E S
I can NOT COUNT the Number of engine JOBS I have Done ALONE , You Can also SAVE about5-6-7 HUNDRED BUCKS in the process. But If you feel Confident with and Are Mechanically Inclined I say DO IT.

Mar 29, 2009 | 2004 Ford Escape

1 Answer

Abs warning light on 02 ford escape


check the abs rings on the axles they have a tendency to crack and will set a light. does the vehicle have remote start? Is it an aftermarket system?

Feb 28, 2009 | 2002 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...