Question about Holden Commodore

Open Question

Wiring diagram for LHS headlight on VS commodore

Previous owner has altered the wiring, need to know what coloured wires are for parkers/low beam, and high beam

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 178 Answers

SOURCE: low beams

hello i no you said you checked your fuse box go under your hood drivers side near your strut tower their problay is a second fuse box its black some times fuses is on the cover you have to unlock the side of cover lift off on inside of cover will list what is what sometimes left and right headlamps are seperate fuses goodluck

Posted on Sep 14, 2008

Ad

SOURCE: !997 Chevrolet S10 headlight problem

I have had the same problem with my 97 S10. I looked at the GM iring diagram and found that the headlight circuit runs directly through the main headlight switch with no fuse or relay at all. The high low beam switch cannot shut the circuit off completely and therefore make the clicking relay sound that is heard. The daytime running light module looks for a headlight on signal and therefore shuts off the running lights. So when the headlights cut on and off the clicking you hear is the day time running light relay, turning them on thinking you are shutting the headlight switch on and off. Inside the headlight switch itself is a thermal metallic circuit protector similar to whats inside a flasher switch. This is the only logical place for the headlight circuit to cut out since it is a directly wired circuit as explained before. Replace your headlight switch for less than 20 bucks from autozone.

Posted on Oct 27, 2008

j_del
  • 1586 Answers

SOURCE: INOP low beam and high beams

The problem is the headlight switch itself - it's one of the most common failures on these cars. The part, brand-new, is about $158 from ECSTuning.com. Replacing it involves removing the airbag and steering wheel - not difficult but a little nerve-wracking due to the power of the airbag.

If this is something you want to tackle on your own, reply back here and I can give you a step-by-step on doing the work yourself. Or you can go to a shop/dealer and just have them do it. They'll probably charge you at least two hours' labor, even though it's a 40 minute job. Let me know what you would like to do.

Posted on Dec 11, 2008

  • 326 Answers

SOURCE: 2008 Ford F-250 Low beams do not work. High beams are fine.

just remove all the connections as it could be malfunction in the switches and the wirings needs to be rechecked to make it proper.other option could be bad dimmer switch. You will need to replace the turn signal/ dimmer switch as an assembly.to replace you will need to disable the air bag, drop the column, pull the wheel

Posted on Jan 10, 2009

  • 1 Answer

SOURCE: fuse diagram for 91 chevy corsica

Need copy of wiring schematic for 1991 chevy corsica

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lights have blown on my 2004 ford territory tx the parker lights work so does high beam and fog lights only the low beam Don't how do i change these


There are low beam and high beam fuses but it could be the bulbs first go to ford owner manual.com and register for free then download your owners manual go to roadside emergencies and your fuse box diagrams and fuse values are in there and then you will know what you have to do next fuses or bulbs I'm suspicious of both bulbs going out at the same time so check the fuses first before spending $$$on bulbs it could also be a bad wire shorting to ground or a bad bulb socket

Apr 11, 2018 | Ford Cars & Trucks

1 Answer

DB7 Wiring diagram


There's this website www.reliable-store.com
They have books on ALL vehicles.

it covers wiring diagrams, electrical diagrams,
fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, owner's/service/repair/parts/maintenance manuals etc everything totally..
I have 1987 toyota 4runner model and I keep servicing and when needed repair it on my own. worth it !!!

Mar 17, 2018 | Aston Martin DB7 Cars & Trucks

1 Answer

I have a 96 barina 3 door city and the low beam headlights refuse to work high beam and parkers are fine have replace indicator head light stalk switch but am now wondering if it may have some thing to do...


have you checked the bulbs low beam can blow and high beam will still work take head light bulb out and make sure both springs in side the bulb are attached the bulb will also show a blue burnt looking colour if blown

Mar 25, 2015 | Holden Barina Cars & Trucks

1 Answer

Where is the relay switch on my magna vrx?


It could be a faulty dip switch on steering column. To eliminate this connect the correct wires (check wiring diagram first before for colour coding). If the low beam works with connected wires,switch is faulty.

Aug 21, 2014 | Cars & Trucks

1 Answer

I have a 94 Honda Civic EX, and the right low beam headlight does not work. The bulb was bad, and I replace it, but still didn't work. The high beam works, and I can hook the low beam connector to the...


there are fuses for each light, high and lo beam. the grounds are grounded at all times, I dont know what you mean by open seeking. its wired like every other car. Right low beam is fuse 21 Red/White wire should be hot if fuse is good. I dont know what you mean by hooking low beam connector to battery? check fuses.

Sep 09, 2011 | 1994 Honda Civic

1 Answer

Need the wiring color diagram for a 1991 Suzuki Sidekick at the headlight plugs. i'm trying to wire in 100/80 Heliolite bulbs and yes I know they are off road only bulbs. i have the relays and a fuse and...


should be three wires one ground one power for low beam one power for high beams

unplug connector
take a test light (if dont own one buy one there real cheap and useful) clamp test light to good ground turn on lights on low beam probe wires in connector until test light lights this will be low beam power
no switch to high beams should have power on other wire

Jun 09, 2010 | Cars & Trucks

1 Answer

I only get highbeams, not lowbeams. Daytime running lights work fine. People at Canadian Tire say it is most likely the relays. I lack the technical know how to know what those look like or where to find...


Power for the headlights goes directly from the battery to the headlight switch, then to the dip/flash switch on the column.

The fact that the high beams are working but not the low beam says the problem is somewhere between the switch on the column and the headlights.

Either the switch has failed, or there's a broken wire or open connector in the wiring harness.

The wiring for the low beams is a blue wire with red tracer. Check the wires coming off the steering column with a voltmeter to see if the problem is with the switch or the wiring forward of the steering column.

If you have power at the connector harness coming off the switch, then keep working forward to find the open circuit.

Jun 04, 2010 | 1993 Nissan NX

1 Answer

Low Beam Drivers Side doesn't work ... low voltage,


Power for the headlights on the Left side (High and low beam.) comes from the same fuse... The ORANGE wire and the ORANGE/BLACK are the same, they connect in the harness. If you only lack the 12v to make the light work connect them at the headlight assembly.

If your low beam also lacks ground the Left low beam ground is shared with the right low beam ground... Run a wire from left low beam DARK BLUE to right low beam DARK BLUE/WHITE.

If its not working now then your cursed, seek a witch doctor.

May 23, 2010 | 2004 Buick Regal

2 Answers

!997 Chevrolet S10 headlight problem


ya know it kinda sounds like the headlight switch that switches from high beam to low beam has a bad contact. You don't have one of those 4-beam modules that turn on all 4 lights on high beam do you? that thing screwed my whole headlight system up, I ended up throwing it in the trash.

I have the chiltons and haynes manual, I'm sure between the two we'll find a good diagram. I gotta get my youngin to open house at school, but I'll pull the books out and send you the wiring diagram.

Aug 07, 2008 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Holden Experts

yadayada
yadayada

Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14406 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...