Question about 2007 Chevrolet Silverado 1500 2WD

Open Question

Maf/iat wiring diagram for silverado 5.3 - 2007 Chevrolet Silverado 1500 2WD

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
abauto
  • 353 Answers

SOURCE: which 2 wires is The IAT on 2007 Silverado

If it is a cheap $20 chip from e-bay, throw it away. You will be risking a lot while getting very little in return. The first guy to answer this is absolutely correct.

Posted on Jul 27, 2009

Ad
  • 1168 Answers

SOURCE: 2007 GMC 2500HD. TRYING TO FIND WHERE THE IAT

Hello mahnkes.

You did not mention what engine you have.
I have based this reply on a 6.0 liter gasoline engine.

The IAT (intake air temperature) is integral with the MAF that is mounted in the intake duct and if defective will need to be replaced as an assembly.
#2 in the diagram below.

f470717.gif
I hope this helps you along.
Let me know if your engine isn't the 6.0

Posted on May 01, 2010

Testimonial: "Yes, this was very helpful!! I have a 2007 2500hd and was trying to find this iat sensor wiring so i can install my new rs4 chip fuel saver.YES,6L.TY"

  • 227 Answers

SOURCE: I am wiring a chip

the sensor in air duct

Posted on Feb 02, 2011

bonedivers
  • 1140 Answers

SOURCE: im wanting to hook up

will need more info on vehicle

Posted on Jun 14, 2011

  • 1 Answer

SOURCE: how to check a 2009 chev cobolt MAF/IAT 5 wire

what color are the two wires for the maf/iat sensor in a 5 wire plug on a 2008 cobalt LS 2.2L?

Posted on Jul 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What color is the positive wire on iat sensor on 06 pontaic g6 gt with a 3.5l motor


The iat is part of maf sensor. The iat gets 5 volts ref from the computer.
Hope I got the correct wiring diagram? I try to be accurate.
26328807-dfdklcxrhpcuw1hfcgvzf0s1-3-0.jpg

Oct 26, 2016 | Cars & Trucks

4 Answers

MAF/AIT Sensor


Hi,

I am tempted to think that you are considering relocating the IAT. Not sure for a 2008 model but if you have brown and white/pink, then they would be pins 1 & 6 for the IAT. To confirm, pin2 would be IGN B+12, pin3 is ground, 4 & 5 would be the MAF.

Hope you can wing it from this. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Aug 19, 2008 | 2008 Ford Focus SE Sedan

1 Answer

Where is the MAF/IAT sensor on a 2004 Chevrolet Silverado ?


You Tube Video--always go there,always

Google--always use that & read what is in print, for decades

In or on the intake plastic ducting between the air
filter box & the throttle body on ALL (98%) of vehicles
you can find the MAF,follow the wires

I would guess 90% have the IAT also inside & part of the maf

Jul 16, 2014 | 2004 Chevrolet Silverado SS

1 Answer

Iat sensor diagram maf groundthe


ok 95 , must be 16v as only that engine has MAF.
the sensor is on the air cleaner box, has 2 wires. and the ohms
is on the below page. as is the full schematic, and the maf wiring
is the cel glowing key on , and off driving 20miles? if not post the flash codes. DTCs.
the iat is the least important in fact the 92 its MISSING !
the maf tests are here. too. many tests,
suzuki sells a maf for $1000 (dogs) and the china one is junk.
so test it carefully or go broke fast.
IAT and ECT ( both read same)
http://www.fixkick.com/ECU/temp-sensors.html

see gen 2 here.
http://www.fixkick.com/schematics-run.html

der MAF.
http://www.fixkick.com/sensors/92-95MAF/92-95-MAF-testing.html


Nov 27, 2013 | 1995 Geo Tracker

1 Answer

For a 2005 GMC yukon 5.3L what are the wire colors that control the IAT sensor There should only be 2 wires controlling it but there are 5 on the connection as it controls the MAF and IAT with the sa


The intake air temp sensor is part of the MAF sensor so yes there are 5 wires.
The two wires that go to the air temp sensor are tan and black. The other three are for the MAF.

Apr 20, 2013 | GMC Yukon Cars & Trucks

1 Answer

Wiring diagram for my 2003 GMC Sierra 1500 HD it has 5 wires at the IAT MAF .


black wire is the 5 volt reference from PCM to IAT. Tan is IAT data signal to PCM. See diagram below.

c0f7422.gif

Oct 31, 2010 | GMC Sierra 1500HD Cars & Trucks

1 Answer

I have a MAF/IAT combo in my 98 plymoth neon 2.0 DOC i need a wire diagram for the wires goin to the sensor


SENSOR GND A BLK/LT BLU
IAT SENSOR SIG B BLK/RED
5 VOLT SUPPLY C VIO/WHT
MAP SENSOR SIG D DK GRN/RED

Aug 03, 2010 | 1998 Plymouth Neon

1 Answer

2007 GMC 2500HD. TRYING TO FIND WHERE THE IAT SENSOR IS LOCATED. Is this on the lower left side of your truck under the hood. Does this have a 5 wire plug into the MAF?


Hello mahnkes.

You did not mention what engine you have.
I have based this reply on a 6.0 liter gasoline engine.

The IAT (intake air temperature) is integral with the MAF that is mounted in the intake duct and if defective will need to be replaced as an assembly.
#2 in the diagram below.

f470717.gif
I hope this helps you along.
Let me know if your engine isn't the 6.0

May 01, 2010 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

How to check a 2009 chev cobolt MAF/IAT 5 wire sensor and what should i get for my reading for the 5 wires/


what color are the two wires for the maf/iat sensor in a 5 wire plug on a 2008 cobalt LS 2.2L?

Mar 06, 2010 | 2009 Chevrolet Cobalt

2 Answers

There are 5 wires in my MAF plug. I need to disconect two of the IAT wires to add a performance chip. I just don't know which two those wires are.


get a diagram from dealer for the iat not mass air and just hook it up to iat. maf are to exspensive to mess with . tell the dealer you need to replace your iat and need a diagram they will give it to you. that's your wires

Jun 02, 2009 | Cadillac STS Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...