Question about Volkswagen Beetle

1 Answer

No power going to waterpump - Beetle Volkswagen Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

The water pump is driven off of the timing belt on a beetle depending on which motor you have. If it's a 2.5 it's driven off of the serpentine belt. So the chances of that are very slim.

Posted on Nov 29, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Waterpump


pull out your coolant res.
pull off your belt.
you will see the old waterpump.
remove all four bolts.
clean off gasket off waterpump mount on motor.
place gasket.
install.

Jun 30, 2012 | 1999 Pontiac Sunfire

1 Answer

How to intall motor belt


for a 5.7 liter, start a the crank pulley,go clockwise around the waterpump pulley,go downto the power steering pulley,up to the a/c comppressor,under the idler pulley,up to the alternator pulley,and the slip the belt onto the tensioner pulley.

Jun 09, 2012 | 1997 Chevrolet Suburban

1 Answer

Leaking anti freeze. But not from the radiator.??


If it is coming from the front of the engine and almost dead center, then probably the waterpump is going bad. The waterpump is located underneath the timing covers (2 pieces), and requires you remove the timing belt to change it. I can email you a procedure for removing and reinstalling the timing belt if you wish. Send a request to sernst@insightbb.com if you decide to change the waterpump.

Mar 28, 2011 | 1997 Isuzu Rodeo

1 Answer

Procedure on changing waterpump


  1. first drain the cooling system.
  2. loosen bolts on the waterpump pulley and remove the inner fender cover on the pass/side.
  3. remove the surpentine fan belt, note; make a diagram of the belt routing so belt will go back on the right way.
  4. remove the bolts you loosened on the pump pulley, use a pry bar to pry engine back to have enough room to remove the waterpump pulley.
  5. remove the bolts holding waterpump, you will want a pan under the van to catch coolant when waterpump is removed,
  6. remove the pump and clean old gasket off the block and install new pump,
  7. reverse to install new pump and fill system with coolant allow engine to run until thremostat opens,hope this is helpful. heres a few diagrams of the waterpump and the cover and the belt routing, good luck and hope this is helpful.
  8. e0c2b8f.png3e5449e.giff12ccdc.gif

Oct 27, 2010 | 2005 Dodge Caravan

2 Answers

Do you have to remove power steering belt pulley to change the water pump?


no, just remove the belt, then the cover over the waterpump then the waterpump pulley,NOTE; loosen waterpump pulley bolts before removing the belt,just loosen dont remove!,next is to remove bolts holding waterpump and pump comes out,9e51b2d.gif

Apr 10, 2010 | 2004 Chevrolet Impala

1 Answer

Thanks birdman..does the return hose connect to the waterpump or to the valley?


There will be two hoses going into your firewall (into your heatercore) Take off the bottom one Its nowhere near the waterpump

Mar 26, 2010 | 2000 Chevrolet Blazer

1 Answer

Powerstearing leaking behind waterpump


then you need to check the hoses on your power steering pump

Apr 23, 2009 | 1993 Cadillac DeVille

2 Answers

2008 Kia Spectra. Overheating and no heat from the heater.


The window washer doesn't work in our 2008 Kia spectra, and we have plenty of fluid in the resourve

Mar 16, 2009 | 2006 Kia Optima

1 Answer

Surpentine belt.


depends on which v8 you have....the 4.7 the routing is as follows it goes under the waterpump pully over the alternator down and around the power steering pumpto the crank...it goes under the bottom of the crank to the idler pully.the flat side of the belt goes ver the idler then around the automatic tensioner to the ac compressor.
on the 5.2 and 5.9 it routes starting at the idler pully the flat side goes undr the idler the up to the ac compressor around the compressor and down to the power steering pump ... around power stering pump to waterpump where the flat side is against waterpump pully around water pump down and around crank up it automatic tensioner....around tensioner and up and over alternator

Nov 30, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...