Question about Cars & Trucks

Open Question

Remove left front fender 2006-2007 chevy impala

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 24 Answers

SOURCE: Remove left front fender 1967 Chevelle

There are quite a few bolts on this fender. One on the bottom of the rocker, one between the the door and fender on the "A" pillar, one on the cal, one on the firewall then several on the inner fender and several on the radiator core support. after these are removes you need to take ou the head light assembly and you should have a fender brace under the front of the car. Hope this helps.

Posted on Oct 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the driver side front fender on a 92 chevrolet s10 pickup?


remove the driver side front fender Teeta, Removing fender on your truck, Check the attached links,instruction and guides may be not identical but really close to yours. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
1994 to 2003 Chevy 10 GMC 15 Blazer and Jimmy Left Front Fender...
http://www.s10forum.com/forum/f137/s10-fender-removal-457021
http://www.automotiveforums.com/t561502-need_help_on_removal_of_front_fender_my_91_s10_blazer.html
S10 Fender Removal eHow

Jun 24, 2016 | Chevrolet Cars & Trucks

2 Answers

What size allen needed to remove break pads


Allen wrenches usually come in a set, try 3/8.

Apr 30, 2016 | 2008 Chevrolet Chevrolet Impala LS

1 Answer

Remove left front fender 1980 300sd


Remove marker lamp and headlamp assemblies.

Remove bolts behind lamp assemblies holding fender to frame of car.
Remove bolts along seam hidden under hood.
remove left front wheel and splash guard.
remove more bolts in wheel well
open left door, remove bolts in sill by door hinges.
Take lots of wires and stuff loose from fender.
Tada, fender is removed.

Dec 19, 2014 | Cars & Trucks

1 Answer

How to replace right front fender on a2007 replace fender 2007 chevy impala


There are four bolts and the hood hinge to remove on top. Remove the tire, remove the inner fender cover( seven or eight screws). There are two bolts to remove the fender from the front bumper cover. And one bolt to remove from inside the door( open the door, remove the cloth, the bolt is close to the top). Replace in reverse.

Oct 09, 2014 | 2007 Chevrolet Impala

1 Answer

How to change a coolant fan for a 2001 impala


  1. Disconnect the negative battery cable.
  2. Partially drain the cooling fan.
  3. Raise and support the vehicle. Refer to Vehicle Lifting.
  4. Remove the transmission oil cooler lines from the retainers at the bottom of the cooling fan shroud.
  5. Remove the lower fan shroud push pin retainers.
  6. Lower the vehicle.
  7. Remove the right and the left engine mount struts.
  8. Remove the left front fender upper diagonal brace.
  9. Remove the radiator inlet hose from the radiator.
  10. Remove the air cleaner assembly.
  11. If equipped remove the cooling fan heat shields.
  12. Disconnect the cooling fan shroud electrical connectors.
  13. Remove the cooling fan shroud bolts.
  14. Disengage the cooling fan shroud clip from the top of the radiator.
  15. Remove the cooling fan shroud.


25010346-uuob5xk5qpmufdktz2iyu4qm-2-0.gif

Aug 25, 2014 | 2001 Chevrolet Impala

1 Answer

Fender removal


it's not always real easy to remove a fender, screws/bolts under wheel house cover, at back of fender accessed from open door, possibly from behind headlight, you just have to keep looking for all the bolts til you can pull it off

Apr 01, 2014 | 2008 Chevrolet Impala

1 Answer

HOW DO I CHANGE the power antenna on a 1995 chevy impala ss


I will assume its in the trunk? Either way, VERY easy to change! Remove the inside trunk panel to expose the motor. there may be one or two nuts holding it in place! First disconnect the power wire plug. then remove the one or two nuts, holding it in place. Last unscrew the ring on top and it should drop right into your trunk. Install in reverse order. IF its in your front fender, you may be able to get to it from the wheel well. You would have to remove the splash guard from the outside part of fender!

Aug 15, 2012 | Cars & Trucks

2 Answers

Where is adjustment screw for headlights on 2008 impalla


Vic, the adjuster is either a allen key, torx, or #2 philips type bolt found close to the bolt that is holding headlight in place on inner fender rail/flange. I believe on the Impala the only adjustment is up and down of the light beam. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Adjust the Headlights in Chevy Impala eHow
How do you clean headlights on 2002 chevy impala
How To Change Install Adjust Headlights 2000 2005 Chevrolet Impala

Jan 11, 2012 | 2008 Chevrolet Impala

1 Answer

Where is the air pump on a 2000 chevy impALA


Underneath your driver's side front fender (in front of the tire), you will find a black removable panel on the bottom. This panel can be removed or adjusted by removing the three screws attached at the bottom (front) of the fender and two screws inside the wheel well towards the bottom front. With the car jacked up and safetly standing on jack stands, remove the front driver's side tire. You can now fold this black panel back (it has a hinge point for this purpose) and gain access to the secondary air pump.

Oct 06, 2009 | 2000 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...